ar10

i have a barrel for a ar-10 that is 14.5 inches long and very FAT and has an unusual contour it is stamped "REM-PAN 1-10" i know what the 1-10 is does anybody know what rem-pan is? thanx

Yeah, so I may have picked a bad time to start building an AR10 with the hopes of ever getting around to using it. So I've got the Armalite upper and lower on the way, and I know the next hardest part is the barrel. Anyone know of anywhere of AR10 barrels in stock or should I put in an order...

I just picked up a Noveske N6 lower and an Armalite lower parts kit, and have since been looking around trying to figure out if it would be smarter to buy the rest in pieces or just pick up a complete upper. After pricing things out, I am thinking that the savings, if any, from buying a...

I have a question for you, does the brass fired from your rifles have loose primer pockets on the first firing? I have a stock barrel (LW) on mine and it shoots real tight but the primer pockets are loose on the first firing. I switched to an adjustable gas block and it has helped some but not...

Just got a DPMS 308 and need a good mount to put the night force on, whats a good 1 peice 20MOA mount to put on these? The dealer down the rd has a Armalite for $139, is it any good and worth it do i need better? I need something that wont let the scope run out of elevation at 1,000 yrds. Thanks

Congratulations you are now one rifle closer to getting your rifle. i had to cancel my order today due to a unexpected vehicle purchase... gosh

Can someone tell me what, if any differences there are that would prevent use of DPMS parts in AR-10 and vice versa. I am particularly interested in dimensional differences in pin sizes, thread pitch ect. And can AR-15 parts, such as buffer tubes ect. be used in DPMS and/or AR-10? Thanks Crump...

Long Time Lurker here! Guys I am putting together an AR10 I would like to run with a 18 inch barrel!For mid range shooting and close quarters. I have my bolt gun for distance! I was wondering if any one had any input on gas system length and reliability. And I will be running a suppressor if...

I need some help. I just finished building my AR-10. I used my SL-100 (http://www.cabelas.com/cabelas/en/templa...200006&rid=) to sight in at home before heading to the range. I get to the range and set up at the 100 yard line and everything is WAY high. I adjust the elevation all the way up...

I recently purchased the complete adjustable gas system for my AR-10. My problem is I have all the parts stripped. The Super SASS manual doesn't describe or show an exploded drawing of the complete assembly. If anyone knows this assembly, I would greatly appreciate your help....

I am just starting to build my first 308 AR. I bought a DPMS lower which was a good deal. Now I am working on a trade for AR-10 20 and 25rd. Gen II mags. If I get the trade done I am thinking of keeping the mags and selling the Lower. Any opinions on which will make the better build? Thanks...

Cheers Have been playing around with an idea to update my Oberland Arms AR-10 SASS with some 6.5mm barrel. Likely it would be 260rem, barrel lenght around 22". Does special 260 reamers for AR10 even exist? Mean like 223 "wylde-style", accurate chambering without sacrificing reliability. What...

I just chronagraphed my 44.5 of Re15 -155 Scenar and had a average of 2750fps shooting a Gap semi auto 24inch Bartlein barrel. 30 degrees temp. Does great groups. Will this speed get me to 900 yards or should I look for a higher speed. Thanks, Lance

I went into the gun store yesterday looking for a used Remington 700 for a 243 build I have been thinking about and came home with a stripped Eagle AR10 lower. I know Armalite use to make these in 243, but has anyone here done this recently? What problems have you run into with functioning...

Went to the "range" today and shot a few rounds. I had a great load for the AR with 155 SMK's and other 150's that I have used in the past, so I loaded up 10 to shoot over the chrono. I ended up shooting only 5 over the chrono and the rest I tossed at a rock @975 yds. This is the first VLD I...

finally put together another ar-10. it has a 21" complete noveske upper, and I assembled the lower. Took it out sunday. It shot sub 1/2 moa 5 shot groups, but it would not cycle. It would not load the next round into the chamber without pulling the charging handle back. I used 168 BH ammo. Any...

I was getting a bunch cci br2's and br4's to work in bolt guns. will they work equally as well in the ar platform stuff? Chris

I was shooting my AR-10 today. First few rounds were fine (single fed). All of the sudden the bolt would not stay locked back. I remove the magazine and a piece of the bolt stop catch fell out. It was sheared off. A. What could cause this? B. Where can I get a new one in a hurry? as I...

The original build was by GAP, Rock barrel and BO forearm. I bought it from a member here. The rifle shot so well that I decided to save the upper (for what I don't know) and build another upper just to hunt with in South TX. This is my primary rig for Whitetails and Coyote pushing the 155...