load

I am currently running 47.0 gr of re-15 in lapua brass(sized with a collet die) 155 vld bergers load 2.890 coal with br2 primers. I get a little ejector wipe every 6-7 rounds around 85 degrees. It gets hot here in the summer so I don't know if that will cause more serious problems or not. I...

I am working up a load for a 700p in 300RUM does anyone have a good load for 175SMK or 180 balistic tip I have IMR 4831 but I am sending him powder hunting and don't want to have to try a bunch of different powders

I have a 30", Rock, 9.4 twist. Federal Match Primers, Magnum. H1000 88.0 grains 300 HPBT Smk's They are shooting real good. Anyone have a better receipt I should try?

Federal brass w/ 43.1gr of rl15, winchester standard large rifle primer, and a 175smk. Sound like a good recipe??

Ok...I found a load my .223 bolt gun likes. Still does not shoot as well as factory Black Hills ammo but better then my last few loads. Here is what I have: Black Hills fired brass trimmed and FL sized. 24.5 of TAC Hornady 50gr Vmax CCI small rifle primers The next step in the manual opens...

Hello This is my first post since joining this forum, looked many times but finally jumped in. My question is based on my attempts to improve the present sweet load for my Sendero based 300 Win Mag, (altered a little) which so far does quite well with W-W Brass; Fed 215 primers; Berger VLD 210...

I am trying to find load data to use clays to load my .357 sig and I cannot find anything. Does anyone have a load for this or is it not safe. If not safe let me know why. Thanks

Have a bunch of TAC and am looking for a good recipe for .223. I have 50gr Vmax,55gr Vmax,and some 69gr BTHP. Take care,Stan

Just curious as to what load seems to be the best with 139 lapua in a 26" barrel, surgeon action?

I'm looking for a load with Nosler 150gr JHP and using Titegroup. My Nosler book does not have Titegroup in it. I'd be using CCI 400's if I can ever find any.

Currently I use lapua brass for my 30-06 handloads. I recently bought a good amount of 30-06 remington brass and would like to load them up to match my existing loads as closely as possible. I’m doing this just to have the extra ammo there if I need it. I’ll probably just keep the Remington...

M700 VFS 1:14 26" Anyone have any luck with Hornady 52gr BTHP Match, Barnes 50gr VLC or SMK 52gr HPBT? Any issues with this skinned match ammo coming apart at 3600+ fps? I would appreciate seeing your best accuracy loads for this cartridge.

Hey guys looking for a load for my 300 win mag. I am using what I have been able to get my hands on the last few months. Here is what I have Once fired winchester brass will be FL resizing Hodgdon H4350 powder CCI LR Mag primers or Rem 9 1/2 LR Mag Primers Sierra 180 Gr. Gameking bullets I...

are you shooting 250 or 300 gr in yours also coould you share the load with me . leaning to 300 gr Thanks in advance

appreciate any help in either 250 or 300's what fly's best the barrel is 27" double chamber brake AIAWM Thanks Bill

Ok...I am going nuts hear trying o find a load that shoots well in my short barrel (16 1/2") .243. It has a 1:10 twist barrel. And since I can not find much in the way of powder variety, I am using RL-15 right now. I have Hornady 75gr HP, 75 gr. Vmax, and 87gr Vmax bullets. So far my best...

40SW and 10mm auto lead loads. 175 TC and I'll be using Bullseye. Does anyone have a good start point to work up from?

I'm loading for 175 SMK with Varget. My Sierra reloading manual says 41.7 grains is MAX load. My Hogdon reloading manual says 45.0 grains is MAX load. Kindly, WTF?

I have been working with the 168 VLD 2.830 OAL in my remington VTR and I shot 3 shot groups from 42.5 grains to 45.5 grains of ramshot tac in .5 increments. The 43.5 (2615 fps)grain group was .5" with both surrounding groups about 1 inch and having the same center poi. The 45 grain (2720...

Has anyone here loaded for this caliber yet? Done lots of looking on other sites, but not too helpful. I was wondering if there is any data out there for rifle powders? All I have found is mainly pistol powder loads. Any input will be appreciated. Thanks in advance! Justin