load

Title says it all wanting to use Varget or Benchmark. In taking it dog hunting.

I can't find anyone with 1:14 twist, all load data I find is for another twist. Does anyone have 1:14? If so what is your favorite load? My best loads have been: All Rem Brass, Fed Match Primers 40gr V-Max - 28gr H335 50gr V-Max - 27gr Varget 50gr Blitz - 28gr H335 52gr HPBT - 27gr Varget...

I need to load a few thousand 9mm rounds. Problem is, all I have are magnum primers for small pistol. If I use milder loads will it be safe to use the magnum primers? I have both Federal and Winchester Magnum small pistol primers. How much pressure increase might I expect to see using the magnum...

I need a load that will mimic the Remington 168gr. Premier Match as close as I can. I have 168 SMK REM brass Winchester primers. Varget H4895 If I need something different then let me know.

Picked up a Burris Black Diamond 8x32 to use on my rifles for load development. Put on three Leupond qrw rings so I can mount it to any of my rifles without pulling rings on and off.

Conditions were: 25F, clear, slight tail wind. shooting prone from folding rest. 89.0grs VVN560 Lapua brass Fed. 215 Mag. Match 3.575 coal MV 3022 fps I think that dog might hunt!!!

I'm having a SBR (11.5") 9MM put together over the next several months,and I was wondering if anyone had any suggestions for powder?It's going to have a 1-15" twist,so I was planning on using 115's out of it. I've never botherd reloading 9MM because it was so cheap and plentiful,until now...

I made it out to test some loads with the new 7wsm Surgeon built by GAP. This is going to be one sick stick once load development is done. When I first got the gun from George I tried some of the Corbon loaded 7wsm stuff and some hand rolled stuff with 64 grains of 4831sc with 215M and...

Hi everyone 1st post. I'm looking for some loads for a 243 win. using 115 DTAC or 107MK and vv n-165. Thanks

I'm finding a lot of firsthand reports on 155-gr Lapuas and the occasional A-Max, and I've just finished up a box of Nosler 155s and have access to some Berger 155.5s.... Except for the A-Max, anyone see differences in safe max loads between the various 155s? With both 4064 and IMR 4895, my...

Not exactly the normal thread topic, but I figured you guys would be able to help me out pretty easily. I have a box of 200 XTP's sitting at home and a few pounds of Blue Dot and some Power Pistol for my 9's and 10's. I'd like to put some BD or PP behind those 200's but Alliant has no data for...

When I do my load development for cartidges such as .243, .308, .223 I develop loads using the "ladder" method and usually will vary my charge weights by .3gr increments. When working loads for large bores (i.e. .338 Lapua), it seems as though .3 increments would be to small due to the overall...

Hello, Looking for a hunting load for a 300 RUM. Been playing with 180 Nosler Partitions with no luck on groups. Any suggestions would be appreciated. Thanks, Weldon

Does anybody know what the load is that Black Hills uses in their 190 grain match load for a 300 win mag. I figure a 190 grain Sierra Match king, their own brass and probably a powder not available to reloaders but what primer?? Federal 215 GM?? Thanks for the info if anybody knows

I just picked up a romanian ak with the side mounted russian scope. It is trying to shoot a group at least by AK standards. Does anyone have a pet load that might bring a little more consistancy over the cheap ammo I have. I had some soft point ammo that shot OK from an SKS and it shot 3 into...

I assume that the only way you get muzzle flash is if the powder hasn't fully burned before the bullet leaves the barrel. So if my loads produce a muzzle flash does that mean that they are suboptimal, in that either the powder is too slow or the primer isn't sufficient? Or are there good...

It has left my memory what george shoots, 62 or 62.5grs H4831SCC with 180gr VLDS.

Well, today was my first time with my hand loads. I think, all in all it did pretty well. I'm not sure about the velocity going up and the POI coming down, though. What do you think? Two groups I think I'm going to play with.. Shots 3-6 and 12-15. I hope 14 and 16 were me pulling the...

I have an older gentleman at our range wanting to get into reloading his 7mm and 300WM. I only reload .308 and .223 so my knowledge with these is limited. With the powder primer issue right now is there a powder that he can use for both loads?. I looked over the reload depot and saw rl 22 pop...

Hello: Is anyone using QUICK LOAD / QUICK TARGET? Is it worth it or should I stay away form it.