Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
307 Win, lever action, body is the same as the 308 Win. Now that Hornady is selling their LeverRevolution bullets, it's time to see what this puppy can do as a hunting rifle for elk and muleys. 160 grains Sectional Density: 0.241 Ballistic Coefficient: 0.330 Long range it ain't, but out to...
i made a mistake the other night when i was working on some 308 loads. i just got some barns tipped TSX bullets in 168 grns. and 130 grns to try out for some hunting loads. i am going to change my powder charge by .5 grns each group to see what kind of accuracies i can get out of them. i already...
Title pretty much says it all. I'm looking for some load data for a 243 AI with 75 V-Max. I'll be using 210m primers and would prefer to use H414 because I have lots of both. I would consider using 70 blitzkings also if anyone has any personal favorites. Thanks for any and all help.
I just got a .338 lapua and I got some bore tech bullets.the bc is .869 on a 245 gr. Lapua brass. What's a good powder to use and maybe where could I find a load chart for these bullets???
I have asked this question several different ways with no results, so i will ask it again a little more clearly. I need to know were i can find reloading data for RE17 and the 6.5CM and 243Win.
I have decided to start reloading. I've been reading the old threads here and other forums and very helpful Reloading 101 by Doc. I wanted the opinion of some precision shooters from here about the Hornady press. I shoot Bullseye pistol primarily and lots of 45ACP and 38spl. I would also...
Anyone know if 20Gr of H4831SC will work with 52 SMK or A-Max bullets in 223 Remington? (Hodgdon H4831SC.....) Is this a functional load? ...a dangerous load... anyone know?
I've got a winchester 94 in 44 mag on the way from Acehigh (thanks John) and am looking for a hotter load for it. It's going to be a close-in bear gun (Think Alaskan browns...) so I'm looking for heavier loads for heavier slugs, preferably 300grn+ JSPs. The rifle's got a 20" bbl, so I should be...
An uncle gave me a Win model 70. It is post 64 and has a bull barrel with 1 in 12. The barrel is marked .222, but it was rechambered for 223. It does chamber a factory 223 round. It has a pretty good trigger and the bore looks good. I was thinking of making up a BUNCH of rounds for a Pdog...
Hi, As the title says I want to do some load development for my new Tikka T3 Varmint. The rifle will be strictly a target tool and the range will not exceed 500 yards. The classic components for a .308 target rifle are Lapua cases, CCI BR2 primers and Varget powder. I have plenty of each on...
Anybody got a good load for a 45 ACP 200 gr SWC lead bullet? I tried 7.0 of Unique but it was a bit snappy, felt more like 40. Also, has anybody had any problems with this bullet in a Springfield XD? Strick
I am having a 7mm RM rifle built. It will use a 26" Broughton 1-9 5c barrel 5 1/2 taper, Norma brass, I've got Berger 168gr. vld's so far. Any advice on your preference of primers. I usually buy 1 type and stick with it. I've never messed with different brands of primers. Powder preference?
I have no experiance what so ever with lead rifle loads.Where I live my local range is only 100 yds and this is were 80% of my shooting has to be done.It seems kinda a waste of bullets powder and barrels to shoot my full bore 308 match rounds.So I was thinking of doing a reduced power lead load...
Any of you guys using R-17 in you 260s or 6.5 Credmor with the 120gr bullets?? If so what is your load an how do they shoot??? What are you getting for velocities?? Thanks guys!!!!