Need help on mount

[Tech43]

Building a AR10, LMT 6.5 CM and have the optic already 34mm tube, and didn’t know about the height of mount /MOA that I should be getting, Going to buy a Spuhr mount, my local range is up to 250 yards and have another range that goes out to 500 yards, both of which will be most of my shooting, but if it goes according to plan will want to push out to 1000 yards after skills prove so , thanks in advance

 

[CK1.0]

I'd recommend the SP-4602: 1.5" height with 20moa cant.

For AR-style guns the 1.5" height seems to be the go-to.

 

[boomslang]

Sp-4602 or Sp-4616.

I’ve got a Sp-4616 on my AR10, but either one will work.

 

[cschastain2]

If you ever plan, possibly in the future, on using NV or Thermal Clip-on’s, it’s always a good idea to use the 1.5” Height Mounts. Because the standard is mostly 1.53” for most NV and Thermal Clip-on’s and the optical line up will work well. So, I agree with the above fella’s 1.5” advice and the 20 MOA as well.
I like, sometimes to use the Spuhr QD versions too.

Good Luck with your build!