.

What causes it ?

The Collider ?

Or Mass Psychosis

On February 7, 2024, Hawaii’s Supreme Court issued a decision saying that the U.S. Supreme Court’s Bruen (2022) does not surpass Hawaii’s constitution, which recognizes “no state constitutional right to carry a firearm in public.”

The decision came in Hawaii v. Wilson, a case in which Wilson is seeking recognition of his right to carry a gun in public for self-defense without first acquiring a permit from the state.

Hawaii’s Supreme Court unanimously decided against Wilson, with Judge Todd Eddins, a Gov. David Ige (D) appointee, writing the majority opinion.

Eddins wrote, “We reject Wilson’s constitutional challenges. Conventional interpretive modalities and [Hawaii’s] historical tradition of firearm regulation rule out an individual right to keep and bear arms under the [Hawaii] Constitution.”

He then directly addressed the U.S. Supreme Court’s Bruen decision, which struck down New York’s proper cause requirement for concealed carry permit issuance.

Eddins wrote, “Bruen snubs federalism principles. Still, the United States Supreme Court does not strip states of all sovereignty to pass traditional police power laws designed to protect people.”

He later added, “States retain the authority to require that individuals have a license before carrying firearms in public.”

It remains to be seen what, if any, appellate action will be taken in light of another important aspect of the Bruen decision; namely, the recognition that the Second Amendment protects a right to carry a gun outside the home for self-defense.

On June 23, 2022, Breitbart News quoted Supreme Court Justice Clarence Thomas’s majority opinion, wherein he referenced previous cases affirming the right to keep and bear arms in the home for self-defense, then turned to Bruen and said, “In this case, petitioners and respondents agree that ordinary, law-abiding citizens have a similar right to carry handguns publicly for their self-defense.”

The case is Hawaii v. Wilson, No. SCAP-22-0000561 in the Hawaii Supreme Court.

This is going to be interesting!

.

Question for all the Marines in the hide , I have a younger friend who's wanting to join, mid 20's, thin , bit of a pothead , but has worked as a roofer most of his adult life so used to hard work , but he's not a tough guy at all , not a sissy but never been in a fight , been bullied a little , I just don't think he's cut out for the Corp, my Question is do any of the former Marines especially recent ones , think a guy like this can pass basic training , I know it's not as tough as it was back in the past , but this guy's never had someone yelling in his face , he's kinda soft-spoken nonconfortational and I'm worried that if he doesn't pass basic , it might fuck him up emotionally, I'm I just being a worry wart.

For stealing 3 guns!

Impact 737r AI/AW cut bixnandy tac sport pro single stage 6dasher barrel ace break rifle has approximately 650 rounds on it shoots like you would expect it to 2150 shipped to your ffl also have 400 pcs of alpha brass Redding s type dies and Eric cortina mandrel die for 500 shipped not looking to part out barred action at this time also not looking for any trades

1 full opened case (10 boxes of 20 rnds) or Hornady 80gr ELD-M SOLD

Three 20 rnd boxes of Hendershots 70 gr hammer hunter SOLD

Two 20 round boxes Copper creek 62gr Barnes TTSX SOLD

Two 20 round boxes Copper creek 77gr Barnes LRX SOLD

Two 20 round boxes Copper creek 75gr ELD-M SOLD

Up for sale is a NEW/NEVER USED Manners LRH rifle stock with the following specs:

RIGHT HANDED
Shell - ELITE HUNTER
Action - Remington 700 short action and clones (American Rifle Coup De Grace SA)
MCS-M5 SA MINI CHASSIS
Barrel Contour - PROOF SENDERO
Butt Pad - 1/2 INCH PAD - 13.5" LOP
Finish - ET BLACK FOREST MOLDED
Hardware - LRH 12.75" FULL LENGTH ARCA RAIL
Hardware - FLUSH CUP 2 LEFT
Hardware - FLUSH CUP 1 BTM REAR

The original cost of this stock was $1275.

NEW PRICE As of 10 FEB 2024: $1000 shipped to your door, saving you money and the wait associated with the lengthy lead time for getting a stock like this ordered with Manners (4 months plus).

PayPal Friends & Family is preferred for payment to avoid fees on my end. If you want to use traditional PayPal, you'll have to cover all transaction fees (+3%). I’ll also accept cash during a face-to-face deal if you live near Raleigh, NC.

Feel free to PM me with any questions/requests for additional photos you might have.

Thanks for checking out my listing and have a good one! S/F!

Hey all, looking for some advice. I'm new to precision rifles. Been reloading for years, but trying to improve my hand loading. I don't compete, but retired with a 200yd range on my property. Recently purchased a MPA pmr rifle. Loads of fun. In an effort to take the shooter out of the equation for load development I purchased a Sinclair competition bench rest. I need a plate for the benchrest. I see that 3" width is kinda the norm for the bench rest bags. I looked at the Sinclair bench rest adapter plate, but it is not compatible with an arca mount. Anyone have a suggestion for mounting a bench rest plate to my rifle with an arca clamp? I can get a cheap arca clamp, just need a suitable plate to affix. Thanks in advance!

This may be a dumb question, but do they make flip up scope caps that don't interfere with the focus ring on the eyepiece. I have a vortex viper PST gen 2 5-25X50 scope. All the ones I've seen press fit over the focus ring, and looks like when you need to focus you would turn the whole flip up cap.

Just a heads up/PSA... if using a mandrel with a Ti-N (gold) coating that's advertised as "not needing lube", disregard that advertisement.
Lube IS required.

This past weekend I expanded the necks on maybe 150 pieces of 6.5CM brass that had been wet tumbled and annealed. I didn't lube the necks during expansion just to see if it mattered. Yep. Expanding force was increased, and most importantly, at the end, it looked like there were streaks of galled brass running up the mandrel and it was very rough. I wrapped it in a cotton patch and hosed it down with Patchout & Accellerator and left it in the sink overnight. Patch was blue and purple the next morning, but was clean as a whistle and smooth again. Lesson learned.

No experience with the carbide versions or the "black" one from 21st Century, feel free to chime in.

Chime in with your experiences...

-ZA

Nearly brand new, used on one coyote stand. I’m a leveling base guy. $385 firm TYD

This is the R lock version but works on non r lock rails fine

I listened to it all and have a few take aways... But it is probably best if you listen for yourself.

Login to view embedded media

well that went to shit quick, guess im a scammer lol

#1 New McMillan A3, remington 700 short action, BDL, pillars and studs, proof contour, black with black/tan spec, 35oz, 625 shipped. SOLD

#2 New McMillan A3, remington 700 long action, BDL, pillars and studs, remington sendero contour, transition, 32oz, 625 shipped. SOLD

#3 New McMillan HTG, remington 700 long action, BDL, pillars and studs, remington sendero contour, olive, 35oz, 625 shipped.

#4 New McMillan HTG, remington 700 short action, BDL, pillars and studs, remington sendero contour, black, 35oz, 625 shipped.

Just wondering the consensus; my first AR build i staked - maybe one other time haven’t done so to recent ones . Noticed no difference. Now my two working rifles are staked but is it necessary for a range /varmint rifle ?

I know of a very large lot of used ballistic glass. Anybody have any ideas what to do with stuff like this?

Panels vary in size from about 27"x24" (estimated weight 100 lbs each) all the way up to 46"x67" (estimated weight 450 lbs each). These windows are very thick and EXTREMELY heavy.

There are about 100 windows on ten pallets of 1,800 lbs each. Total weight is 18,000 lbs.

The stuff is used, some is cloudy, damaged, etc.

Up for sale is a American Rifle Company ARC Coup de Grace .308 Rifle Action, Right Hand with Pivoting Handle, New In Box / Never Fired. I bought this action to build a rifle for my wife and she decided to hijack my AI AT-X instead - so it has to go!

In separate listings, I am also selling a new Manners LRH stock and a new/unfired PVA Osprey 6.5 Creedmoor barrel that would pair well with this action and make an awesome rig. If you want to buy any or all of these items together, we can work out a package deal discount possibly.

NEW PRICE As of 18 FEB 2024: $900 plus cost of shipping and insurance to your FFL.

PayPal Friends & Family is preferred for payment to avoid fees on my end. If you want to use traditional PayPal, you'll have to cover all transaction fees (+3%). I’ll also accept cash during a face-to-face deal if you live near Raleigh, NC.

Feel free to PM me with any questions/requests for additional photos you might have.

Thanks for checking out my listing and have a good one! S/F!

All GREEN/"Supporters" ROCK!
We're UNofficial, Unashamed, and Unafraid!
TEAM GREEN POWER in the HOUSE!!!!!!

Yes that's the Big question . Are Your brass cases really as good as You think they are ?. Have You measured them and exactly HOW are YOU measuring yours ?.

I have a precision ground Granite Base or surface plates . Mine happens to be roughly 18"X18"X8" polished Black/Blue Granite . Have #4 AAA Certified Lab Grade plates . I came by mine in early 80's ,as there was a Scientific Quarry company in SoCal which Cut slabbed Raw granite. They had mile long Diamond wire saw and precisely Cut and Ground ,polished enormous slabs of granite . Also have a 2" X 88" ground straight edge , a piece given too Me by them for certifying or verifying levels .
They made various " Instrument Tables " of varying lengths and thickness . I just happened by one day when they were finishing a 12 Ft. x 38" X 8" table and scored the End cuts for Peanuts for what costs are now .

So I decided to Stand up some cases and using My Starrett Machinist precision ground level and square ,after using the Master level on the Base to insure level . SURPRISE !.

I'm resorting Many cases ,as I was surprised after taking some measurements . Oh case mouth neck thicknesses are Spot on using Ball Mic but Cases weren't all Plumb !!!.

FYi : That included Used ,New and even the Beloved L brand of Brass . So Just saying , ARE YOU SURE ? . I thought I was and then learned the truth .

As you were ,Carry on .

As you may know, I'll be participating in my first match (Gadsden) on Feb 24th. Thanks to all of you who have given me plenty of advice this week, I really appreciate it!

I'll be "dancing with the girl that brought me there"...in that I'll be shooting my GAP Impact (hunting) rifle in 6.5 PRC. It's heavy, does the job, and I can't afford another cool looking tactical rifle with every possible rail and attachment right now.

I've read a few threads where the Production rifle Division is seen as a joke, but I don't understand why. Is it just that the higher-end rifles and optics are that much more precise than using a sub-$3,000 and sub-$2,500 scope? After I first read the rules it seemed to me that it would be more of a challenge to use production equipment - as if to level the playing field for the match.

I'd love to hear your thoughts on the matter. Thanks!

When you shoot long guns, how do you roll???

I'm sure it varies, but most if the time what do you do?

I have a like new Barrett M82A1 CQ
- leupold mark 4 Army issued 4.5x14
- leupold issued mark 4 rings
- pelican case and all the paperwork
- 300 rds of ball/tracer and API rounds

IF interested call or txt 1.931.704.1585
This rifle has been a safe queen and well taken care of. Thanks and God Bless

10k will not take any less