Filter

BEWARE OF PROOF PREFITS

PSA FOR PROOF PREFIT BARRELS!!

I recommend to everyone after this fiasco to look other places for barrels. I have 2 barrels from them previously that shoot really good. But this 3rd barrel is only capable of 1.5 MOA and Proof has left us with a $900 piece of junk. After testing all shelf ammo we could find for this barrel and it not being better than a 1.5 we sent it in to proof. We received a call a few weeks later stating that it shot .5” with the exact ammo we told them it would not shoot and would not provide pictures. Being that this chambering has been discontinued by them I figured they were giving us the run around so they do not have stop their process to bring out old reamers.



We then took this barrel to a custom ammo manufacturer in our state to see if he could go to bat for us. Immediately he had his doubts as he has had many problems with them in the last few years. He then measured out the chamber and found that there was over .300” of jump. (photos below). He sent this info to proof and requested a replacement and they stated that those chamber specs are not right and they would warranty it.



We heard from proof 2 days ago now and they sent us pictures of a mold they took of the chamber and measured it out stating their was only .06” jump and met SAAMI spec and would not be replacing the barrel. They could not provide us with which bullets they were using to spec the chamber and did not provide much information at all.



So now we are stuck with a $900 barrel that shoots like shit.



After talking with this custom ammo manufacturer, he stated this has been very typical of proof the last 3 years and has had to send in over 50 barrels to the warranty department due to not shooting and chamber dimensions and currently has 4 of them he is trying to make a load for because they won’t shoot good. The size of groups for each one were provided, 1.8, 2.2, 2.5, and 3 MOA.



I will no longer be buying proof barrels and hope to steer people away from their prefits so they don’t waste that kind of money on them either.

Attachments

  • image000000.jpeg
    image000000.jpeg
    308.2 KB · Views: 719
  • image000000.jpeg
    image000000.jpeg
    248.6 KB · Views: 750

Firearms SOLD FN SPR 1st Gen For Sale

Hey all,
$1200 shipped to your FFL in continental US. This is a low use rifle that I threaded, upgraded the jewel trigger set to 2.5 pounds. It comes with the original Mauser style trigger to switch to if desired… this is a pre-64 action with Mauser style trigger. It comes with the original HS Precision Marksman-pattern stock, heavy 26-inch barrel with one 5 round magazine and currently in a McMillan a4 with area 419 arca rail installed with a (1) 5 round and (1) 10 round fn proprietary box magazine. It comes with the Area 419 sidewinder magnum brake. The rifle has only had 300 rounds through it… a safe queen and only re-finished because the original first gen rifle receiver was blued and over time turned red and I was concerned about protection against the elements with the loss of original blued color… all other parts parkerized. This rifle is a tack driver that I have used for track testing my various scopes. Needs to find a new home due to back surgery in near future… it is a great rifle. If you have any questions please feel free to pm me. This is a really cool pre-64 rifle made in the USA and has the chrome lined 26 inch barrel. Note scope not included. The rifle is confirmed first gen based on time of purchase and serial number.

Attachments

  • IMG_4581.jpeg
    IMG_4581.jpeg
    877.6 KB · Views: 308
  • IMG_4582.jpeg
    IMG_4582.jpeg
    703.3 KB · Views: 301
  • IMG_4583.jpeg
    IMG_4583.jpeg
    462.7 KB · Views: 264
  • IMG_4584.jpeg
    IMG_4584.jpeg
    322.5 KB · Views: 242
  • IMG_4586.jpeg
    IMG_4586.jpeg
    225.8 KB · Views: 286

SENTINEL Hunters in 6.5PRC just dropped.

Just completed a 2nd batch of SENTINEL Hunters in 6.5 PRC.

IMG_2928 cropped.JPG

PDF of the workorder/specs for each rifle in this batch: https://www.kmwlrs.com/_files/ugd/1824dd_0accfa07a59b4b0ba803824b8769891e.pdf

IMG_2932 Lightened and sized down.jpg



IMG_2934.JPG


IMG_2939 size reduced.jpg


IMG_2943.JPG


IMG_2940.JPG


1000002601 cropped.jpg


IMG_2942.JPG


I was trying to get this 2nd batch out before end of hunting season but was getting my ass handed to me by other projects.
More images and updates on this batch can be viewed on this page of the KMW site: https://www.kmwlrs.com/kmw-rifles-ready-to-go

Link to PDF of the workorder/specs.
https://www.kmwlrs.com/_files/ugd/1824dd_0accfa07a59b4b0ba803824b8769891e.pdf

NYC migrant crime ring.

In recent a months a wave of migrant crime has washed over our city, but by no means are the individuals committing these crimes representing the vast number of people coming to New York to build a better life," NYPD Commissioner Edward Caban said.

My ass Edward.

If these fuckers had not been allowed to cross our border, this would not be happening.
A big thank you to the Biden administration.


  • Like
Reactions: Milf Dots

Firearms Three Winchester Model 70 Heavy Varmint .308 package

I have 3 Winchester Model 70 Heavy Varmint .308 rifles. All have Burris Signature 6x24 scopes, and Kowa spotting scope w/25xr eyepiece. One has a Harris bipod. One has a Timney trigger. All are in excellent condition with less than 600 rds thru them. In fact one probably has less than 200 rds. All have hard cases. All have been gently used…These will put 5 168 gr matchkings in a quarter at 200 yds all day long. I am selling these great rifles because my brother is legally blind now, his wife died a yr ago which is why her rifle is for sale and I have Parkinson’s bad enough to stop precision shooting. We are the original owners. We want to find good homes for these fine rifles. We are asking $1800 each. If you have any questions or need more info, please contact me here. I live in Georgia. Thanks for your consideration. Steven

The target shown below was at 100 yds. I hadn’t shot this rifle in 12yrs.
IMG_1626.jpeg
IMG_1622.jpeg
IMG_1624.jpeg
IMG_1571.jpeg
IMG_1568.jpeg

Attachments

  • IMG_3058.jpeg
    IMG_3058.jpeg
    388 KB · Views: 110

Guy tells a hunting story

One day at work some co-workers and I are drinking coffee in the break room and a new guy comes in gets a cup of coffee, and after a few minutes he is telling a couple of the guys about his deer hunt. He said he shot a deer at 700 yards with his 7mm Mag off hand. I asked what was his holdover? He answered back, don`t need to, 7 Mag shoots flat. He said I just held dead on. I walked out of the break room.

A couple days later, same guy is telling another deer hunting story. This time he shot a deer at 1200 yards while laying on a branch up in a tree. Again, I asked what was his hold over. He said, 7 Mag is flat, don`t have to do that. I told him I won`t call you a liar, but that is bullshit. He looked at me not pleased. I said, I own a 7 Mag. He got his cup of coffee and walked out of the break room.

One of the guys asked if his story could be true? I answered, no.

Biden reveals his illegal invasion plan. Well, duh.

Amnsety for all that cross the border, with the right to vote.

Actually, it's Obama behind the curtain but his pantshitting crash dummy is delivering the message.



I did ranchwork for a multi millionare big-tech software mogul globalist who referred to me as 'people like you' one too many times. He has a family of illegals working full time clearing brush. The globalist did let me hunt deer and hogs on the property as he got an Ag break for every hog removed.

His land bordered a big park that allowed a two week deer hunt by lottery. Before the two weeks, I noticed the park hunters were putting pop-up blinds and staking out my deer feeder from the park side of the fence. I told the big tech globalist I was taking my deer blind and feeder away until the two week park season was over so the park hunters didn't hunt out of my blind or shoot deer and hogs off my feeder on his property. It was a noble sacrifice on my part, looking out for that gloabalist's best interests.

Before the two weeks was over, one of his illegal alien brush crew moved HIS blind and feeder where mine were, with full knowledge and permission by the owner.

I told the owner I would just move my blind and feeder further down the fence line. His response was he didn't want me to put a blind on the fence because people from the park would hunt out of it! The cocksucker used my own reasoning against me to cockblock me from hunting on his land.

I knew right then an illegal alien, one of his peon slaves that isn't even supposed to own a firearm, had priority and was held in higher regard in the eyes of a Californian, big-tech globalist than a conservative native Texan. I am the white, middle class they want to eliminate.
  • Like
Reactions: Ronws

SOLD Burris XTR3 5.5-30 SCR2 Mils

I have a great condition 5.5-30x Burris XTR3 with the non-illuminated SCR2 (mils) reticle. I bought it new a few years ago and used it for a few matches. Its still like new with no blemishes and pristine glass. It's had the wrap on the front to protect it since I first mounted it.

$950 shipped and insured, can include Seekins low rings for an additional $100
Comes with original box


1000007533.jpg
1000007532.jpg

Israeli m14 sniper rifle

I'm going to be posting a bunch of Israeli firearms as they are somewhat topical. I'll begin with my Israeli M14 sniper "clone". It has an original Israeli surplus fiberglass stock modified for sniping by the addition of a high cheek piece, rubber recoil pad, side mount sling swivels, and Harris bipod. The scope mount is original Israeli issue as is the sling. The scope is a Khales Wien ZF 84 10x42. The barreled action is a Springfield National Match M1A and has a single lug. The trigger is a National Match, as is the op rod and rest of the rifle. In the video below I'm engaging a 1 1/2 foot circle at 550 yards. I'm using the BDC on the scope which works really well. I'm using M118LR 173gn BTHP. The target has a Caldwell Flash Bang strobe on it but to be visible in the video you'll have to go to full screen and at least 1080p.

Login to view embedded media
DSCF0016.JPG


DSCF0109.JPG



DSCF0110.JPG


DSCF0111.JPG


DSCF0112.JPG


DSCF0113.JPG


israeli m14 sniper.JPG


israeli sniper.jpg

SOLD Two Vortex Scopes For Sale

I have two as-new Vortex scopes for sale. Both scopes have been mounted but never used. Excellent condition. No box for either but include Sunshades.

#1: Vortex Viper PST Gen II, 5-25x50, FFP, EBR-7C (MOA) Illuminated Reticle. $675 shipped.

#2: Vortex Strike Eagle 4-24x50, SFP, EBR-4 (MOA) Illuminated Reticle. SOLD. (one small flake of anodizing missing on the illumination knob pictured)

PP F&F, or USPS money order
IMG_9636
IMG_9637
IMG_9638

SOLD Nightforce ATACR 4-16x42

Nightforce ATACR 4-16x42 F1 with Mil-R reticle. Includes box, paperwork, and lens caps. Asking $1950 $1900 shipped.

Payment: PayPal F&F, Venmo, Zelle, CashApp, etc.

Trades +/- Cash:
- Leupold Mark 6 1-6 (TMR-D Reticle)
- Garmin Xero C1 Pro Chronograph
- FDE Weapon Light (Surefire, Modlite, Arisaka, etc.)
- Magpul 300BLK Magazines (20 and 30 round)
- Geissele 700 Trigger

IMPORTANT: Message me directly if interested. Scammers are creating accounts and pretending to be the seller.

IMG_1470.jpeg

IMG_1471.jpeg

IMG_1472.jpeg
  • Like
Reactions: simonp

SOLD NEW KAHLES K525i DLR SKMR4 RSW

SOLD New Kahles DLR K525i RSW and SKMR4 reticle. I bought the scope a couple of months ago from Sport Optics to use on a new rifle build, but ended up changing my mind and decided to go with a lower magnification scope for hunting. The scope was only taken out of the box to test fit on the new rifle and to take these pictures. The scope is in 100% brand new condition with absolutely no flaws and comes with all of the included Kahles accessories, factory throw lever, factory neoprene scope cover, original box and paperwork. I will also include a new set of Kahles Tenebraex scope caps. You are buying a brand new Kahles DLR. Price includes shipping to the lower 48. I will only sell to verified established members. I prefer PayPal F&F for the form of payment.

Attachments

  • IMG_9059.jpeg
    IMG_9059.jpeg
    540.3 KB · Views: 143
  • IMG_9046.jpeg
    IMG_9046.jpeg
    441.6 KB · Views: 154
  • IMG_9048.jpeg
    IMG_9048.jpeg
    403.5 KB · Views: 159
  • IMG_9052.jpeg
    IMG_9052.jpeg
    445 KB · Views: 157
  • IMG_9051.jpeg
    IMG_9051.jpeg
    410.7 KB · Views: 133
  • IMG_9053.jpeg
    IMG_9053.jpeg
    363 KB · Views: 141
  • Like
Reactions: dlouie87