Up for sale is a small Sebenza 31 with the natural micarta inlays. The knife is in very good condition with only one or two very small trails on the clip (pictured). The micarta on this one is very good and one of the best inlays that I’ve seen on a Sebenza. Lockup is solid and centering is perfect. Refer to the card in the picture for blade and material specifics. Does not have the original paracord lanyard material (replaced with a leather lanyard) but it does have the original lanyard bar and lanyard bead from CRK. $350 shipped ppf&f.

I bought a Savage Axis a few years back for a project I just got started on. I pulled off the 30-06 barrel today in preparation to have the action trued and install a light Palma 8x57 barrel.

When I broke the barrel nut loose, I noticed a bunch of tiny little round objects come out of the threads. I was able to get the action off the barrel tenon no problem but the nut locked up hard half way off. Needless to say I’m a bit perplexed by what this could be. Feels metallic but I didn’t try to get them to stick to a magnet. Almost looks like fine spherical gunpowder, but like extra fine and again, really hard.

Any ideas? Anyone ever seen anything like this? The rifle is new from Cabelas, and is still unfired. Thanks.

Many of these uses are unvetted but I thought this interesting.

What Is The Main Ingredient of WD-40?
Before you read to the end, does anybody know what the main ingredient of WD-40?
No Cheating.....
WD-40 ~ Who knew!
I had a neighbour who bought a new pickup.
I got up very early one Sunday morning and saw that someone had spray
painted red all around the sides of this beige truck (for some unknown
reason).
I went over, woke him up, and told him the bad news.
He was very upset and was trying to figure out what to do ....
probably nothing until Monday morning, since nothing was open.
Another neighbour came out and told him to get his WD-40 and clean it off.
It removed the unwanted paint beautifully and did not harm his paint
job that was on the truck. I was impressed!
WD-40 who knew?
"Water Displacement #40".
The product began from a search for a rust preventative solvent and
degreaser to protect missile parts.
WD-40 was created in 1953, by three technicians at the San Diego
Rocket Chemical Company.
Its name comes from the project that was to find a 'Water
Displacement' Compound.
They were finally successful for a formulation, with their fortieth
attempt, thus WD-40. The 'Convair Company' bought it in bulk to
protect their atlas missile parts.
Ken East (one of the original founders) says there is nothing in WD-40
that would hurt you.
When you read the 'shower door' part, try it. It's the first thing
that has ever cleaned that spotty shower door. If yours is plastic,
it works just as well as on glass. It's a miracle!
Then try it on your stove-top.
It's now shinier than it's ever been.
You'll be amazed.
WD-40 Uses:
1. Protects silver from tarnishing.
2. Removes road tar and grime from cars.
3. Cleans and lubricates guitar strings.
4. Gives floor that 'just-waxed' sheen without making them slippery.
5. Keeps the flies off of Cows, Horses, and other Farm Critters.
6. Restores and cleans chalkboards.
7. Removes lipstick stains.
8. Loosens stubborn zippers.
9. Untangles jewellery chains.
10. Removes stains from stainless steel sinks.
11. Removes dirt and grime from the barbecue grill.
12. Keeps ceramic/terracotta garden pots from oxidising.
13. Removes tomato stains from clothing.
14. Keeps glass shower doors free of water spots.
15. Camouflages scratches in ceramic and marble floors.
16. Keeps scissors working smoothly.
17. Lubricates noisy door hinges on both home and vehicles doors.
18. It removes that nasty tar and scuff marks from the kitchen
flooring. It doesn't seem to harm the finish and you won't have to
scrub nearly as hard to get them off. Just remember to open some
windows if you have a lot of marks.
19. Remove those nasty bug guts that will eat away the finish
on your car if not removed quickly!
20. Gives a children's playground gym slide a shine for a super fast slide.
21. Lubricates gearshift and mower deck lever for ease of handling on
riding mowers.
22. Rids kids rocking chair and swings of squeaky noises.
23. Lubricates tracks in sticking home windows and makes them easier to open.
24. Spraying an umbrella stem makes it easier to open and close.
25. Restores and cleans padded leather dashboards in vehicles, as well
as vinyl bumpers.
26. Restores and cleans roof racks on vehicles.
27. Lubricates and stops squeaks in electric fans.
28. Lubricates wheel sprockets on tricycles, wagons and bicycles for
easy handling.
29. Lubricates fan belts on washers and dryers and keeps them running smoothly.
30. Keeps rust from forming on saws and saw blades, and other tools.
31. Removes grease splatters from stove-tops.
32. Keeps bathroom mirror from fogging.
33. Lubricates prosthetic limbs.
34. Keeps pigeons off the balcony (they hate the smell).
35. Removes all traces of duct tape.
36. Folks even spray it on their arms, hands, and knees to relieve
arthritis pain.
37. Florida 's favourite use is: 'cleans and removes love bugs from
grills and bumpers.'
38. The favourite use in the state of New York , it protects the Statue
of Liberty from the elements.
39. WD-40 attracts fish. Spray a little on live bait or lures and you
will be catching the big one in no time. Also, it's a lot cheaper than
the chemical attractants that are made for just that purpose. Keep
in mind though, using some chemical laced baits or lures for fishing
are not allowed in some states.
40. Use it for fire ant bites. It takes the sting away immediately and
stops the itch.
41. It is great for removing crayon from walls. Spray it on the marks
and wipe with a clean rag.
42. Also, if you've discovered that your teenage daughter has washed
and dried a tube of lipstick with a load of laundry, saturate the
lipstick spots with WD-40 and rewash. Presto! The lipstick is gone!
43. If you spray it inside a wet distributor cap, it will displace the
moisture, allowing the engine to start.
My discovery, Ants don't like it..................
P.S.
As for that Basic, Main Ingredient.......
Well.... it's FISH OIL....
Now This Is Definitely Worth SHARING!!

So I was wanting to purchase a really tight stuff tripod and having a hard time deciding what I need. First I want a soar model as I will be shooting ad hunting with it. I think the anvil 30 with the combo anvil/picatinney mount would work best for me as I have a ai at-x anvil mount system and several other rifles with pic rails.
My question is with the tripod itself I was thinking of the series 3 with 3 extensions for more stable legs rather than the 4 extension system.
So the tcft-33 mk2 series 3 but I want to make sure the 4ext is better or more favorable.
Me and my son are 5’8” and 6’
Mule deer hunting in Montana backpack in country.

I have a Nightforce ATACR 5-25x56 and considering the Nightforce ATACR 7-35x56 ffp mils . Would appreciate any advise on best reticle. Most of my shooting is out to about 1,200 yards and occasionally out to 1 mile. Minimum PRS shooting. I'm considering two reticles, the Mil-XT and the Mil-R.

Thanks.

Up for sale is my manners prs 2 with gen 2 short action mini chassis and full length area 419 arca rail in scorched earth color. It’s in good condition, it’s been used at the range but no major marks or blemishes. Just normal signs of use. I believe it’s cut for an impact 737. I’ve had an impact, terminus, and Kelbly Action in it and all fit great. I believe it’s an m24 barrel inlet as well. Measures 1 5/8” by the recoil lug and 1 3/8” at the tip. Weighs 64oz if that’s important to you.

$1050 $1000 shipped conus. PayPal f&f preferred.

Let me know if you have any questions!

I'm looking to put a 6.5 Creedmoor AR-10 together.
I've heard a few guys say the Ar-10 platform is prone to issues like cracked bolts etc. I'd never heard this so I'm looking for feedback from guys with high round counts.
I'm looking at building with all WC parts, any suggestions otherwise?
Also will 147 eldms be an issue for oal?

Harrell's Precision Powder Measure​

Good Condition.
$120 shipped CONUS

Up for sell is a NIB very RARE Knight’s Armament / Emerson Government / Tanto Mule Knife. The Knight’s/Emerson Government/Tanto Mule Knife collaboration piece is truly a unique knife for a collector. Constructed of thick, battle-proven 154CM Steel, nearly .200 thick, it features a combat ready tanto blade that is every bit as tough as it looks. The handles are black with KAC signature dimple effect and they are securely bolted to the handle with industrial strength, nut and bolt hardware. It is an Ernest Emerson design with legendary “Emerson Ergonomics” that are everything you’ve come to expect from Emerson Knives while keeping with the unique Knight’s look. Comes in a nylon sheath with Kydex insert.


Specifications:

• Overall Length: 10.2 in.
• Blade Length: 4.8 in.
• Blade Thickness: .175 in.
• Hardness: RC 57-59
• Blade: 154 CM
• Finish: Black

I haven’t seen one for sell in 6yrs thereabout, so get it now, before it’s too late.

Please see all pics and you be the judge!

Asking $1200 shipped/insured!

Cross-posted!

Made a video. I'm no content creator but wanted to document it.

900m impact. Throw scope off shooting platform about 25ft down the hard packed dirt hill. Install optic again. Impact 900m. Plate is 1/2 IPSC

This was the second time I did this test. First time was on paper. There was no shift. Not even .1mrad.

Nothing broken or dented. Just some sand in the parallax knob and a few scrapes.

I'd say EP5 is GTG.

And so is the OBR mount.

Just as a disclaimer since Arken is very triggering apparently.

I did this just for the hell of it I'm no Arken fan boy nor ambassador. Just wanted to see what this thing was all about because of all the controversy it seems to be creating. It's not an ATACR or TT, obviously!

Just showing that it didn't bust into 1000 pieces or lose its zero from a substantial impact.

Edited title since people can't understand that 25ft can also mean out not down.

Login to view embedded media

I realize barrel life is a difficult thing to predict with the various factors that go into it.

Heat, firing frequency, cleaning schedule, bore material just to name a few.

What's the typical barrel life of a 223 proof SS barrel shooting 80 elds with varget? Not rapid firing .


5k doable holding roughly MOA? 10K?

Winds are 5-10 with some gusting and swirling around tree and shed. Poor BC for a frisbee. May as well be a cor-lokt. Maybe Hornydaddy will come out with a high BC frisbee that won’t deform from atmospheric resistance. God damn Chuck-it frisbee deforms and floats in the wind. She went from 99% catch rate to about 65% catch rate. She wasn’t happy.





Don’t let the face fool you, she’s a down right vicious bitch that holds a grudge. She’s torn up her older brother a couple of times and made the house look like Jack the Ripper was here. Frisbee is serious business.

*SPF*

Up for sale is a Vortex Gen II Razor 3-18x50mm EBR-7C MRAD scope. Was purchased by me earlier in the year and has been mounted in NF rings, however there are no ring marks, dents/damage etc. Includes all the paperwork, accessories etc. it came with.

Price is $1150 plus actual shipping to the buyer. Lately I've seen insured shipping on scopes go anywhere from $20-$50 so I'd rather just charge the buyer actual shipping to them than stack $50 on the price to cover the most expensive option. CONUS only.

Can provide more photos on request etc.

Not currently interested in any trades.

KRG bravo stock with hundreds in upgrades- minimalist spigot extension, Weibad stock cheekpiece pad, barrier stop, qd mlok mount, aluminum mag release, adjustable cheekpiece, picatinny rails, machined metal thumbscrew. Great shape, only used once or twice.
(SOLD) $425 shipped (SOLD)
Prefer GunTab for all payments. Thank you!

New in Box American Rifle Company Coup De Grace Bolt Action:

• Short Action
• Right Handed
• 0.473″ Bolt Face
• Black Hourglass Bolt Knob
• 20 MOA
• Fluted Bolt Body
• Pivoting Bolt Handle

Bought this action when I was debating getting into PRS, I’ve got other projects taking precedence now. It was never taken out of box and assembled. I don't have any rep on ShipersHide so I'm throwing in timestamps, feel free to text/call for any other verification images/etc.

Selling it as received from ARC. My FFL to your FFL. Located in Northern UT. Electronic payment methods are preferred (PayPal G&S, Zelle, Venmo).

$1000 - Free Shipping & Insurace

Just came across this from my collection, and wanted to share. Known worldwide, one of the most accomplished gunsmith & benchrest shooters in history, Seely Masker. He spent his final years in a nearbye town in upstate NY. I used to call him for info and advice after he moved here. It was always pleasurable talking to the old soul. I never commissioned any rifles from him. But he recommended many other smiths who were specialized in whatever it was I was building at the time. He passed on in 1996 at 83 years old. His builds command top dollar when they rarely come up for sale.

Cerakoted Accuracy International AT-X, Gen 2 with folding hinge, barrel channel cover and 20MOA Pic rail, full internal weight, rear monopod, 2 Mags, 26 inch 308 barrel from AI and 26 inch, 2500ish round and 6.5x47 barrel, Benchmark blank, chambered by straight jacket armory under 300 round. Area 419 hellfire match brake on both and Area 419 thread protector, SKB 3614 with custom foam - SOLD

Leofoto SA404 CL with SOAR style Anvil 30 ballhead, 40mm tube - 500

Vortex razor gen3 mrad, spuhr mount, MDT send it level, vortex venom reddot, E dope with hawkhill dope car, and a bubble level - SOLD

MDT Ckyepod PRS length - SOLD

Fix it Sticks Torque Limiter 65, 49, 45, 35, 25, 20, 19, 18, 15 and T handle - 170

Wheeler Fat Wrench - SOLD

Wheeler Electronic Torque Wrench - SOLD

Only looking for cash. Thanks for lookin

Make me a reasonable offer.

7th Circuit rules AR-15’s not protected by 2a


Also Scotus is taking on two major cases:


NRA 1st Amendment and bump stocks.

Both should have decisions in July 2024. The NRA case has massive ramifications on govt overreach and pushing companies to do their bidding.

Not sure about the 7th decision. That probably has to head to SCoTUS too.

Sirhr

Update 11/6/23: Sold per a bid placed on my gunbroker listing.

———

Up for sale is my MK13 mod 3.

I’ve finally reached the point where I don’t feel that securing an MK11 suppressor for it (at a reasonable price) in the near future is realistic. Hopefully someone out there who has one can finish this off right. I went the route of buying a rifle with the suppressor as a package deal, and no longer have a need for a spare rifle.

I’m willing to offer a few options, with the best value being the complete package (the rifle and optic).

1: Complete package: Everything shown… Rifle, rings, optic, bipod, etc. $#####
2: Rifle only (no optic or rings). $#####
3: “Build kit”. If you’d prefer to have it done your way, I’m willing to sell the stock, (and not pictured) an L lug, Remington long action with E prefix, magnum bolt, and MIRS rev B NIB. The stock, L lug, and MIRS are no longer made and the key pieces needed for a build. Note: I won’t split up the build kit. $#####

Here are details on the rifle as it sits:
- There are 230 rounds down the pipe. Basically I did your break in… If you’re willing to run Lapua brass, H1000, and 190 SMKs I will share my load details. 5 shot groups always averaged 0.50 MOA.
- The stock is a retrofit completed by an ex McMillan employee and bedded specifically to this action and L lug. McMillan will no longer work on these stocks, so the options are limited. It also includes the hard to find forearm rail. The original stock color was a grey that was rattle canned over. I don’t believe the grey was molded in, it appeared to be factory painted (a detail for clone builders).
- The barreled action was completed by RWS. It is done to spec, including the L lug with third action screw.
- The optic is a Nightforce NXS 8-32 with correct low speed turret. The rings are not engraved (another detail for clone builders)
- I can share the details of the spray paint I used to match your suppressor to the rifle. It’s the same paint brand and color used on an issued xm-3 (I had it left over from painting my suppressor).

I’m willing to split the cost of fedex ground shipping with the buyer. Your FFL must accept transfers from an individual. Anything above and beyond ground shipping with a signature will be covered by the buyer.

I’ll give it a day and then drop it on gunbroker. Unlike the mod 5’s and 7’s, the parts for these are rarer than hens teeth so I’m going to remain firm on the prices above. If it doesn’t sell then I have another rifle, which ain’t a bad deal either. Potential partial trades with established members include a FP PEQ or AN PSQ 23 (+ cash).

Give me a shout with other questions or for additional pictures.

No one likes it.

Will history remember?

I like Ike

Dont change dicks in the middle of a screw, vote Nixon in 72

Not a dim's worth of difference

Make America Great Again

Fuck Joe Biden

FS: Les Baer 1911 Bullseye
Ultradot Matchdot
1 Les Baer Mag
2 Wilson Combat Mags
$1800

What age did you or your kids stop believing in Santa?