Just wanted to see what you all thought of the chamber job on my new bergara

WTS Manners PRS-TCS Competition Stock - Elite Saltwater Camo (With Sikes Clutch Rail & Knob) - like new condition; sold as shown

SOLD

KRG Bravo Gen 1 chassis for Remington 700 SA with tool-less buttpad, hook style cover & 2" Pic Rail and cheek pad. Like new with the exception of a little never seize residue that will survive a nuclear bomb from Israel. Black. Comes as pictured. $325 shipped. Would trade for/towards a FCD billet receiver, a Geissele acra forend or a proof steel 6mm arc barrel.

WTS Razor Gen 3 - EBR-7D - used but like new condition (see photos)

$2,375 shipped; accept PayPal, Venmo, and Zelle
- any G&S charges or insurance to be paid by buyer

Add ARC M-Mount - 34mm - 1.250" - 0 MOA, as shown, for an additional $175!

Hello fellow hide members.

I need some help. I need someone that has a 737 in .223, or a bolt for 737…

A friend has one and his rifle absolutely will NOT eject. I took a look at the system, and it looks to me like the bolt is over sized. I measured the bolt face and consistently get .388” I measured a couple other bolts I have around and get .378-.379.

This situation is putting a bad taste in my mouth about impact. The customer service has been less than stellar. We sent an email explaining all components and trouble shooting, (a couple actually) and made a few calls, leaving voicemails with no responses for several days. This was all during a prairie dog shooting trip. The rifle was built just a few days before leaving, so no time before hand to get the situation resolved. Finally on the last day of the trip we said what the hell and decided to be rather annoying and start spam calling, which netted a result of an answer.

When the phone was answered, we only mentioned we were having an issue with the action, in which we got the response “ok send it in” No questions of what the issue was, or any trouble shooting suggestions. This led me to believe our email, and voicemails had been viewed/heard, and ignored.


A ship label was supposed to be sent over, it wasn’t. So again a few calls, and days later he finally got a label.

Anyway , rant over. If anyone has a bolt they could measure it’d be great, thanks !!

I've been looking at the some of the new dies out there such as the Short Action and Area 419 and wondering if the cost of them is worth it compared to Redding, RCBS, etc. This is for a rifle that shoots 1/2-3/4" moa, will these new dies really improve accuracy? Not wanting this to turn into a bash thread, just curious before I drop hard earned cash

Is diopter focus required for parallax correction? I have apparently reached the age in which the proper diopter setting is just beyond the available diopter adjustment range. Can one still adjust out all parallax error without a proper diopter setting?

ATACR 4-16x42 F1, Mil-XT (C615)

Bought new a few months ago and in absolute pristine condition. Comes with the original box and all its bits and pieces/manual etc etc.

No trades — $2149 (Shipped & Insured)

--------------------------------------------------------------------------------------

Rings for sale only to the buyer of the scope.
- ARC 34 mm rings Medium..(1.10/28mm) $125
- ARC 34 mm rings High…….(1.26/32mm) $125
Everything for $225

--------------------------------------------------------------------------------------
Please let me know if you have any questions.

I have for sale:

Used PRS Competition build

Aero Precision Solus Action
Proof Research 26" 6 Dasher (approx. 400 rds)
MDT Premier Gen 2 Chassis (Green)
APA Fat Bastard Muzzle Break
MDT internal weights installed
MDT Premier Gen 2 Forend tip weight installed
MDT rear spacer weight installed

Scope and Rings not included

This rifle is balanced and shoots very well
I took 2nd Place at a recent 1000yd steel challenge at 5H Shooting in Frankston, TX with this build against F-Class builds

$Sold. Shipped to your FFL or local (Athens, TX) I can take credit cards!!



If I part out, I will keep the chassis and weights!!

Login to view embedded media

Well I guess it’s better then abusing and stealing from them - and most employees there and fucking retarded so why not their confidential informants?

Hey guys got a like new TCS in raw carbon up for grabs. SA r700. Mini chassis. Has the sikes rail. Will come with 1 butt stock weight full set of rail weights.

$1300.

Never cut anything, but carried a couple times. 450 shipped. Blank warranty card. Newer 4V steel. Black, non-serrated.

6 year backorder per Chris Reeve’s

View attachment IMG_2009.jpeg

Up for sale or trade is my atacr 7-35 mil-xt. Glass is pristine. Scope has been used but not abused. Has a few small scuffs on the parallax knob and turrets as seen in pictures but nothing crazy. No box for the mount or scope. Mount is an arc m-brace 20 moa 1.26 height. Possible trades for mid power optics in the 3-20 range (prefer schmidt and ral 8k) or nice spr builds in 5.56. ***SOLD***

$1000 shipped.
308 bolt face right handed 20 moa fluted and pivot bolt handle. Includes action wrench. Never been built on.

Excuse the wife's nails polish

Seen a few videos on YouTube discussing a new cartridge made by Derek Webster, but haven’t seen any discussions about it here. Curious if anyone has ventured into this cartridge, or is thinking of doing so? What’s recoil like from any first hand experience?

The pro that the videos talk about for using this bigger cartridge is creating smaller wind brackets as wind increases. As well as making clear swings on plate from force. Let me know what you guys think.

At least one of these “companies “ Crowds on demand - that pays equips and transports people to demonstrations and riots has received $34 million in state funding after a hearty contribution to Newsome campaign.

GAP M40A1 and M40A3 built on USMC return stocks by Eric Reid

I’m selling two M40A rifles built by Eric Reid at GA Precision (“fireplug” armorer’s stamp), circa 2005. I am the original owner of the M40A1 and later purchased the M40A3. Both of these rifles are built on USMC return stocks furnished to GAP by McMillan, part of a unique offering during that era. At the time of their build, both rifles met USMC specifications, according to George Gardner at GAP. The A1 has fired approximately 100 rounds and the A3 roughly 500 rounds. They have the original mil-spec barrels from GAP.

The M40A3 was built on stock #4 in the image below. I've also owned and sold another M40A3, built by Eric Reid on return stock #7 in the image below.

At this time I have only these two GAP M40A rifles for sale; the prices do not include any optics, scope ring mounts, bipods or other accessories. The tan vintage MRT leather sling on the M40A1 is included with that rifle, as well as the Picatinny rail and one magazine for each rifle. The optics in the images may be offered for sale at a later time. If you’re confused about what’s included, please send me a PM for clarification.

• (SOLD PENDING FUNDS) GAP M40A1 rifle on a USMC “smear” return stock with 1 magazine and tan MRT sling: $6900 including shipping to an FFL.
• (SOLD PENDING FUNDING) GAP M40A3 rifle on Krylon-painted USMC return stock with 1 magazine: $8300 including shipping to an FFL.

Each rifle will be shipped by “ShipMyGun.com” to an FFL in your local area. We will work out the shipping and payment details.

The above prices are firm, I don’t need any long gun trades, please don’t offer any. I would consider a Staccato C2 or P model 2011 in partial trade – send pix and details. The rifles are located in northern NV.

I have up for sale a tricked out Beretta 1301, it's got all kinds of upgrades. This gun is awesome, I've used 1014's, and M4's, but absolutely prefer this one.

This shotgun will be sold in different packages setup for the buyers preference. There are over 500$ in parts upgrades to this, here's a list:

GG&G Heat Shield & FDE GG&G Zhukov Handguard: $259.50

GG&G Beretta 1301 Adapter For Magpul Mossberg Stock And Magpul SGA FDE Mossberg Stock: $160.65

GG&G Beretta 1301 Optic Rail Mount For The RMR Scope $96.40

GG&G Beretta 1301 Optic Rail Mount For The RMR Scope $130

GG&G QD Sling Attachment For Magpul SGA Mossberg Stock $28.25

RX Arms Beretta 1301 Charging Handle Titanium $79.00

4x 6rd esstac placards $40

Option 1:
You can buy the whole setup minus the flashlight for 2150$. This includes all the GG&G parts, Trijicon type 2 RMR, sling, placards, and original non-folding chisel stock.

Option 2:
You can buy the gun, GG&G parts, and placards for 1800.

Non-folding chisel stock also for sale additionally for 200.

If you have any questions, shoot them to me.

Payment thru Zelle.

Be sure your FFL can receive from private party(s) as this has to ship to an FFL unless you want to meet F2F in the great State of Texas. Out of state buyers still have to have a private transfer done.

I just got my LRB M25 rear lug receiver this morning. Through some sweet talk, I managed to reserve this receiver and have a rear lug welded on to it. Why this receiver? It has the serial number 12345.

I noticed the serial number trend a while back and inquired about it before it was made and spoken for. I reserved it before it was heat treated and it was included with their latest batch of rear lug M25's.

I'm naming it King Roland, of Druidia who famously set the access code to his planet's airlock to 1...2...3...4...5... in the movie Spaceballs.




It will be built with:
-A new TRW bolt
-Bartlein heavy stainless barrel
-McMillan M3A in GAP camo
-TRW trigger group
-Winchester op-rod
-A new in tube Winchester flash suppressor
-A unitized gas cylinder made from a new in the tube gas cylinder with a GI H&R front band

I still need to collect some miscellaneous small parts like a NM spring guide, a NM vented gas piston and a Shooting Sight trigger.











I will eventually suppress this rifle and I'm still undecided on a scope.

Tony.

Looking to sell some rings/mounts I’m not using.

1. Spuhr 6002 O moa 1.5” high in fde with diving board - $300 shipped
2. MPA 34 mm low 0 moa - $125 shipped
3. ARC 36 mm lows - $125 shipped
4. ARC 34 mm low - $125 shipped
5. Vortex/Seekins 34mm medium - $100 shipped
6. Buy them all for $575 shipped

All prices are shipped payment via PayPal f&f or Venmo

I fucking hate how carelessly our hard-earned money is spent by those who don't have to account for it.

Normally it's wasted on stupid-assed social programs, dumped into mega rich colleges and even unnecessary use it or lose it mindset.

After oak leaf shedding season here in Florida, many of my idiotic neighbors take their leaves and blow them into the storm drains.
You might say, "well, that's just fucking dumb." Of course you'd be correct. Not only is it dumb, but it's lazy and illegal.
Dumping those leaves into the storm drains allows them to stack up and block the pipes. For those unaware, oak leaves don't float down the lazy, pretty river like a child's paper boat. They sink to the bottom and begin layering up. Mix those leaves with dirt and oils from the road and pretty soon you have a dam built up. Hitting them with pressure only serves to strengthen their resolve to stay put.


Enter: this guy.


The Suckerater 2000. A big, diesel powered vacuum with a super long flexible hose.
With the 2025 storm season (and general rainy season here) rapidly approaching, Hillsborough County is taking the let's fix it before it's broke approach.
Fortunately, they do this every year at this time.
He was out here yesterday sucking out the leaves.
Boss man ran the camera down the pipe this morning and had him come back to complete the job.

Would it have been better and cheaper to do it right the first time?
Of course.
However, it is being corrected.


This is the kind of stuff I want my tax dollars paying for.

I have a basically new gen tell razor 3-18. Mil, ebr7c reticle.
Never mounted. Has sat in my safe.
Would rather use the funds towards another hunting trip versus finishing this build.
$1200 shipped

I’ll get pictures later.

Catch and release. Bought it from a gentleman here on the hide and haven’t gotten around to shooting it yet. Graduate school tuition for the fall is coming up so non-essential items gotta go! Very clean 525P (regular Gen3xr not fine), small abrasions in the bell shown in the photo, glass is pristine. Comes with the badger comm 1.3 0 MOA, comm level, diving board, TT branded throw lever, and the original packaging/documents from TT. More photos upon request. Not splitting the mount/optic. Combo deal $3700 shipped.

Just receiving unsettling updates here and there that Home Office officials in Alberta are either planning or already engaged in confiscating firearms from gun owners under "emergency clauses" but everybody knows that an important voting referendum is coming up regarding Alberta's secession and possible joining with the United States.

Do NOT comply, no matter what they say. If you do not have anything registered, that means you don't got 'em. Form community mutual defense pacts with neighbors and likeminded towns. Also spread the word to others in more rural areas or those who may not be in the constant Internet flow of news. They may try to trick people into giving up their guns by saying that the confiscation is "temporary and they will be returned when the state of emergency is lifted". That is BULLSHIT. Do not give them up.

Login to view embedded media

Selling an Accuracy International Arctic Warfare 1.5 in 7.62. This variant loosely resembles an L118a1 clone with the factory fitted rear monopod and fixed-stock green skins. The rifle will come with the factory single port brake, one magazine, the original Parker Hale bipod and a factory UK Lothar Walther 308 AI barrel. Furthermore, the rifle will ship in the original, factory Hardigg case. The pictured S&B PMII 5-25 P4FL reticle scope (and mount) is available separately, as are the pictured two additional magazines and Thunder Beast AW action wrench (extra bolt body is sold). The rifle shoots .5 moa groups all day long and stretches out past 800 with ease.

Price:
Withdrawn

Ships to your FFL or willing to meet Texans FTF.