Getting out of 6mm so looking to sell my Berger 105 hybrids. I have 945 of the same lot, one unopened 500 box and one opened with 445 remaining. Looking for $560 shipped.

2k. Great shape.

Hey guys I am selling some clutches that I have designed and 3D printed in carbon fiber. They have steel retention screws and a steel QD stud but the body is in Carbon Fiber to cut the cost down so that I can bring these to you guys for $35 + the ride (average shipping cost is 5-6$). I know a lot of us have multiple rifles or friends that want one so if you buy two I will take 10$ off the cost making them 30$/ea!

We also have a ton of other products and I am partnered with the creator of the super trickle funnel kits so his products are for sale on our website as well!

www.hk3dprinting.com

We are only a few days old at this point and the goal is to bring PRS competitors and avid shooters of our sport products at an affordable price. This sport is already incredibly expensive to partake in so any way we can help out, we want to.

Hey everyone, this is my very first post here and I’ve debated asking for help because I’m probably going to come across as an idiot. I need some help and don’t have any friends or family to go to. This is a long post, but please read.

I have a Savage Axis Precision 2 chambered in 6.5 Creedmoor (rifle came with a 20 MOA rail). Did a little trigger work and got it where I like it. Installed a Vortex Diamondback 6-24x 50 scope, and a set of open range cross slot Leupold rings. I did some plinking at 100-200 yards the past few months.

Today I finally made it out to Dead Zero Shooting Park, the RO was absolutely great. He spent some extra time with me, and after an ammo swap to 140 Gr ELD match I was able to be on target (bad grouping though) at 1000. However we found out my scope is out of elevation adjustment. I got to 600 Yrds fine, ran out of adjustments at 800. At 1000 I dialed in at 24moa on the turret and held 12 on the reticle.

I reached my first time shooting 1k today. Furthest I’ve ever shot was 200 before that. I want to continue into the PRS sport, but I’m questioning if I’ve built something wrong with my setup. The RO said I shouldn’t be running out of elevation with my setup at this range.

Please give me your advice. What should I do to fix this issue? I love shooting, it’s a way of meditation for me personally. I want to put time into practicing, but I wouldn’t want to learn bad habits on something that isn’t right. Is there anyone who lives close by that I could watch them shoot and ask questions?

Over half of the country loves fighting sports. That's 2 people legally beating each other, sometimes to near death or death, but we are ok with it. However, this chick shows her boobs right after a fight, and people lose their minds...we are screwed...

Login to view embedded media
I'm sure this tech will only be used for benevolent purposes.

I started collecting this diecast aircraft series. Only got three so far. These were made from 1993-2017. 25 in the series. My wife gets a good laugh watching me fly them around the house making radial engine noises.

1. 1929 Lockheed Air Express
2. 1932 Northrop Gamma
3. 1931 Stearman

Fly to tropical island that’s specially caters to elite that like to fuck underage girls and once your name gets doxxed all they have to do is make a sizable donation to the correct campaigns and no one even asks them a question- no one asks them a single question

Like many of you, I have owned a wide array of firearms and ancillary products over the years. Also like many of you, I have had stuff break or go wrong which led me to explore the quality of customer service. I know that I started the thread title negative but the best customer service I have had was actually from Schmidt and Bender. I bought 5 x 25 PMII off the forums almost a decade ago. I contacted the company and sent the scope in. They changed the reticle, they reversed the turrets from CW to CCW, they kept me informed every step of the way. I got notified when they received it, when work was being performed, when it was tested for function, when it was shipped back. Schmidt and Bender was completely awesome.

I had an issue with a KAC upper that I could not resolve myself, largely because of the unavailable tool and parts. After six months of trying to find things, multiple emails to the company (never a single response back) I brought the upper to an authorized KAC dealer. Apparently that did not mean anything as they ignored order request from the dealer, they also did not respond to the gunsmith and it took ten more months for the problem to resolve. The experience was so bad for the Gunsmith that the authorized KAC dealer will no longer service their rifles for repair. They will only do things like change the muzzle device or mount a scope.

Was at the range yesterday and had two higher end optics side by side looking at the same target area, same power setting.

Scope #1 had a clear sharp image that was very bright and showed a slight amount of mirage.

Scope #2 had a clear sharp image that was darker than #1, was a little harder to get fit into the eye box and showed a lot of mirage.

Based mostly on the mirage which of the two would be the better quality glass/scope? Does higher quality glass cut through the mirage or does it let you see the mirage better?

The dipshits in WA State would close something like this down, not build it. I hope it goes through.

There was a series of these articles in The Epoch Times that highlighted the brief backgrounds and various contributions of those considered instrumental to the forming of our nations Constitution. I’m especially enjoying the articles covering some of the lesser known and in some cases almost unknown figures that were instrumental to this effort.

Part 5: Edmund Randolph​

For those that don’t know, Epoch Times is probably the most well written and unbiased print and internet media I’ve seen in a long, long time. It is very refreshing to be able to read articles written at a level above 3rd grade with actual facts and multiple views. It’s not all sound bites and click bait like most anything else I’m seeing these days.

From Hawk Hill’s FB page:

“As word spreads fast, most of you already know that we are in the process of selling our barrel making equipment. The support we have received from the shooting community over the years has been nothing short of amazing. We thank each one of you who has trusted us enough to run our barrels. You have helped put Hawk Hill Custom on the map as one of the top barrel makers in the country.
Rest assured, Hawk Hill Custom isn’t going away. We still have our shop in VA and are still distributing our shooting accessories.
As of July 10th we have stopped taking barrel orders. Over the next few months, we will be in the process of moving equipment and training the new owner. We will work as long as it takes to have him up and running smoothly to make the finest barrel possible.
We aren’t going to release who the new owner is, he will do that on his own timing, but you will not be disappointed. He is well known and respected in the shooting community and is determined to continue making the same quality of barrels that Hawk Hill Custom has provided over the years.
We are excited to see what the future holds for this new barrel maker and for Hawk Hill Custom.”

Hopefully a higher court will overturn this.

Federal judge rules Oregon's tough new gun law is ...​

MyNorthwest.com
https://mynorthwest.com › federal-judge-rules-oregon...



10 hours ago — (AP) — A federal judge has ruled Oregon's voter-approved gun control measure – one of the toughest in the nation – is constitutional.

Like new never been in field, hangs on any tripod for easy access to your gear and has quick detach sockets. Color is black multicam.

$45 shipped (new these are $65+)

WTS -
1. (Brand New) Armageddon Gear Game Changer (Standard Fill) (Multi Cam) - $105.00 Shipped
2. (Like New) Armageddon Gear/Area 419 Pint Sized Game Changer (Black) - SOLD

I‘m accepting check or money order

Anyone have a source for “Heavy Sand” to fill rear bag?

Thanks in Advance,
Richard Lewis

This Bag Stop, from Gray Ops, is brand new and is just collecting dust in my garage. I’m asking $75.00 shipped to your front door. I will accept check or money order

This is receiver only. No bolt included. I have a couple different barrel and bolts etc and was going to make another rifle but decided to just use the qc feature and swap barrels when I want to change calibers…. It is new, never used….

Rem 700 SA
SOLD shipped

Must ship to FFL or meet locally.

PayPal friends and family or Venmo….

Like new in perfect shape. Few hundred rounds through it. V22 360. Needs to go to someone that will use it to its potential. Has a 2 stage Triggertech diamond and one mag. Have a lot of pictures I can send. Located in Yukon OK 73099.

22” kukri barrel threaded
20moa rail

$2300 shipped gun. No scope/rings/bipod.

Prefer to keep scope. Mark 5hd MOA 5-25. Have box and everything for it.

Looks like I've inadvertently caught another. @progel sent me pics straight from another site with his username and date photoshopped in. He has been reported to the mods, just wanted to make people aware.

Like new 2-300 rounds through it. Factory threaded 16” match barrel 3 mags, area 419 scope base, and inexpensive bipod. $725 shipped gun shoots great. Located in Yukon ok 73099

I am looking for a 1-10x with daylight bright red dot for 16" 5.56 AR15, shooting from CQB to paper targets to 600 yds and steel to 800M.

From my reading, it seems the Vortex is tops in the application, but I haven't looked at it closely in the last 8 mos or so.

I guess my first question is if there is a replacement for the Vortex in the works. I am not in the know at all, and I woldn't mind waiting/paying for an improved version if one is in the works

Or are there other alternatives available that I don't know about?

Thanks for your knowledge!