For sale is a manners EH1A with mini chassis in Black Forest camo. Remington varmint contour but may accept larger or be inletted for larger profile. Action inlet rem 700 SA or clones.

$800.00 shipped

I have 8, 50CT boxes same lot SK long range match $95 shipped. Sold to @jbell
17 boxes same lot Center X $290 shipped. sold @oneshot 66



19 box same lot center X $325 Sold@Cbowser

So now we have a Chinese Balloon floating lazily over Montana. Just happened to be reading a thread here on the Hide about the grid and what an EMP detonation would do. Surprised everyone isn't in panic mode. Guess the egg plants burning down is in the spotlight at the moment. Never a dull moment.

Topstrap

Vudoo 360

22” MTU Bartlein barrel threaded 1:16 twist
Right hand, black, 30 moa rail, with one mag.
$1850 shipped to your FFL.

I have one of each Diamond Trigger($255) and some extra mags ($40) are also around and can be packaged with the BA.

JP LRP-07 .308, Magpul PRS stock, Hogue grip, JP silent captured weighted buffer, TriggerTech Diamond trigger, JP LMOS BCG, foward assist, side-charge handle, JP MK III Rapid Configuration hand guard, JP Supermatch 416R air-gauged, button-rifled, cryogenically treated barrel Thermo-Fit to receiver, JP Thermal Dissipator, JP compensator. I'm also including 3 Magpul 10rd mags, JP cleaning rod guide, Kydex thumbless grip, Bulldog soft case with shoulder straps and all of the original bits that came with the rifle from JP Rifles. Rifle has between 600-700 rounds through it and regularly shoots between .25 to .4 MOA with 168gr FGMM. CKYE-POD not included.

$2700.00 Shipped. Venmo, Zelle, Cash

Hello Everybody,

You're welcome to send in your action to have the barrel timed.

Here is the shouldered Pre-Fit List:

Accuracy International (M27x2.0) (M30x2.0) no wrench flats
American Rifle Company
BAT Machine
Curtis
Defiance Machine
Impact 737R / 787
Kelbly's Atlas,Prometheus & Nanook
Lone Peak
Pure Precision Summit / SKLTN
Sig SSG 3000 with Benchmark Extension
Terminus
Tikka
Zermatt

Updated Contact Info: 406-539-4684
Phone Hours: Monday, Wednesday & Friday 12 PM until 1:30 PM (Mountain Time)
Mountain Standard Time.
Email: [email protected]
I try to answer emails first thing in the morning or during lunch.
Prices are here: https://www.fishertandc.com/barrelwork
Reamers are here: https://www.fishertandc.com/reamers
Shipping Info: https://www.fishertandc.com/shipping

Thank You, Chase

Please Checkout my store on my website

(2) 28" Heavy Palma 6XC barrels
both barrels around the 1k mark

$200 shipped

They can pull a drunk from a burning car....
Login to view embedded media

Received my ATACR 4-16x42 F1 yesterday. Below are three photos of the elevation turret
dialed at 0.0, 0.5, and 12.0 mils.

As it sits, the marks are a hair "overclocked." I removed and reinstalled the elevation cap and it's still the same. There's an extra mental step I have to take when I glance at the turret after dialing to know with certainty what I've dialed to. I could count the clicks, of course, but my expectation was to glance up and be able to say "0.7" or "1.2" or what have you, instantly.

Question: Do the marks on your turret match perfectly with the index mark on your scope body? Should I contact Nightforce?

What a moron...

From AP

OLYMPIA, Wash. (AP) — Washington state Gov. Jay Inslee has tested positive for COVID-19 for the second time.

Inslee’s office said in a statement Wednesday that he had tested positive and was experiencing very mild symptoms including a cough. He is consulting with his doctor about whether to receive Paxlovid antiviral treatments, according to the statement.

He plans to continue working. Trudi Inslee, the first spouse, has tested negative.

Inslee, who throughout the pandemic pushed for mitigation measures including indoor mask-wearing and restrictions on large public gatherings, is fully vaccinated and had booster shots in October 2021 and March 2022 and September 2022, according to his office.

“Once again I am very appreciative to be vaccinated and boosted,” Inslee said in the statement. “This is a scientific gift that has given us the capacity to prevent hospitalizations or worse. I encourage folks who haven’t received their booster to talk with their doctor and avail themselves of this protective, life-saving measure.”

NO REFUNDS

Hi, just a simple question. Why are bolt action receivers and bolts so expensive? Why do they cost more than a barrel, and as much as a high end stock/chassis? From Impact, to Defiance, to BigHorn, Curtis Custom, and Lone Peak Arms. They are $1000 plus. Is it that it takes more complex machining? I understand that if you want quality you are going to have to pay for it, but do we ever see a future where a good action will cost $500 or less? Is it just that it is a small market to begin with?

A friend works for an electric service provider. The shortage of transformers has been well known and only gotten worse. Here’s the latest. Plan accordingly…

How long after laparoscopic hernia surgery before you can shoot? (From a bench, obviously not some run and gun type shooting)
My Dr is basically telling me I can't do anything for 6 weeks... I don't think I'll make it 6 days let alone 6 weeks!
Shooting from a bench seems like something I should be able to get away with. But I'd like to hear how others did?

How do you guys clean after a rain-soaked muddy match? Complete tear down?

But it was not his laptop. He abandoned it at the repair shop.

CLE 5.56 .223 KRIEGER 1-7.7 VARMINT BARREL
Comes with Areo precision gas system and Hellfire 2P – Self Timing Muzzle Brake w/ Adapter 556 bore
Barrel spec:
20-inch length, CLE chamber, not entirely sure what the gas block diameter is but I think it’s .936, and the thread is 5/8-24.
Fired 50 rounds to test then take off, $550 shipped and insured.

TLC PRECISION RIFLE GRIP
$40 shipped and insured

Hornady Case Prep Duo - Like new in box - $45.00 to your door - SOLD
338-06 Redding 2 die set - New never used - $70.00 to your door
Hornady 1911 Auto - primer tube filler - like new comes with both large and small primer trays and tubes. - $50.00 to your door
Hornady 222 Rem dies - lightly used (40 rounds) - $40.00 shipped
Hornady Case Annealing set - lightly used - $35.00 shipped

I accept check, money order , Zelle, or Paypal. Please note if you pay via paypal ( and don't select friends/family) Please add 10% to your order to cover thier charges.

For sale as title states 5-25x56 milxt with nightforce rings and scope chaps excellent condition. $2400 shipped

So in this video at the 6min mark HOP from TFB tv mentions a Leupold Mk5 2-10 with Parallax adjustment . I looked on their site and maybe I’m missing this model? Does the 2-10 come with pa adjustments?
Login to view embedded media

Hey everyone,

Tldr: I'm currently figuring out what my next suppressors are going to be as I'm trying to stop hot swapping suppressors and get dedicated cans for each rifle. I'm looking at a kgm r6 for a 16" "reCCe" rifle and wonder if titanium can handle harsh-ish semi auto use. I have a 30 cal suppressor already that lives on a competition bolt gun.

I'd like to explore a lighter weight 5.56 can to stay on a 16" lightweight barelled rifle almost permanently. I am looking very closely at the kgm r6, as the weight, length, and features are very appealing. The ocl polonium is also a contender here, but at near double the weight, I'm wondering if I could get away with a titanium suppressor on a semi-auto platform. I never plan for full auto fire.

My concern is with putting a titanium suppressor on something semi-auto. I don't do any mag dumping into dirt, but I will on occasion run something like a 3 gun course with 2-3 magazines in a short amount of time, or hammer out some bill drills at the range, etc. The last thing I'd want is a semi-auto gun I have to run at bolt action speeds 24/7.

Questions:
Can titanium suppressors stand up to very typical semi-auto use?
With 5.56, what typically suppresses better? A smaller 5.56/6mm can, or something higher volume but with a bigger hole aka 30 cal at higher volume?

Thanks everyone for the input and feedback! I'm looking at a lot of suppressors in the near future, and a dedicated suppressor for this 16" semi-auto is top of the list.

I have a 26” mtu profile 6.5 cm barrel. I’d like to shorten it up to somewhere in the range of 16-20 inches to make it a more manageable length for hunting. Can anyone tell me what I could expect the barrel to weigh?

$950 shipped lower 48
PayPl Friend (NO comments with payment please!!!, i'll obviously be looking out for and keeping track of the payment. You don't need to write "thanks for the scope")


Very lightly used, Like New condition. A tiny bit of dust magnified in photos.
Excellent glass quality and field of view. Tracked perfectly with very light use. Less than 200 rounds at the range with a .223

Used but like new zero compromise 527 mil scope and ARC rings. Has maybe 300ish rounds through it. $3500 plus shipping and insurance. Would consider trades for thermals or left handed rifles. Located near Erie, PA.

Fuck the Chicoms.

Take their money for the land but dont let them build.

Air Force opposes Chinese-owned corn plant near ND base​

https://thehill.com › homenews › ap-business › ap-air-f...


2 hours ago — “The proposed project presents a significant threat to national security with both near- and long-term risks of significant impacts to our ...

Have for sale an AI AXSR chassis. Short action footprint, dark earth color, in excellent condition. This came on a Vudoo I purchased, and has only been to the range twice. Looking for $1,800 shipped.