Login to view embedded media
Yep a Quaker pulled over during a storm , decided to read a book. And the police were called , and once they realized the severity of his crimes - reading a book and heading to a religious retreat they went into beast mode and arrested him for public safety. Good work boys .

I totally get the concern that he had “stuff” in his car like a power cord . No telling the shenanigans he could get up to with a book and a power cord on top of being a Quaker

I think I want to branch out from pistols and try some wheel-gunning. I have no prior experience with revolvers.

I first started looking at the S&W 986 because I want to stay with a full-size, I like the 5" barrel, and already shooting 9mm pistols, I have common ammo.

I then started looking at the 627 Performance Center 5" and 627 V Comp. 8 rounds, ability to shoot either 38 spl or 357 mag, there's a lot to like. I rented a V Comp and put 50 rounds of 148gr 38 spl training ammo through it. My impressions were that even though it's a large framed gun, the grip itself isn't overly large and it felt good in hand. I also liked how naturally a revolver points. Recoil was barely there. The biggest drawback was the weight and length of the DA pull, it seemed to take ages to break (but that may also be inexperience). Other than that, I enjoyed it.

As far as use-case, this would be a fun/range gun only, maybe I'll try some competitive shooting in the future.

With the 986, I can get the gun ($1000), cylinder honed and chamfered ($300) and an action job ($400) for the base price of a V Comp. The V Comp was pleasant to shoot, and honestly just looks cool as shit with the slab barrel, full lug and comp. But ammo is more expensive ($0.36 vs $0.25 CPC) and the entry fee is higher. Plus, I'm not sure how it would do transitioning targets with the extra weight out front. And after cylinder work and action job you're in 327 WR territory...

What other factors would you consider between a 986 or 627 PC, 627 V Comp? Any recommendations in either direction?

I've got a new set of boots, never worn. I ordered a 10.5 and got these but didn't notice they were the wrong size until well after the return date expired. I don't have the box anymore. I believe they are the Rivot 400G in coyote, but will confirm when I am home. They run around $400 new unless you have a coupon. Asking $150 shipped.

I have two 6mm arc uppers for sale.

Upper number 1:

ODIN Works 6mm ARC barrel, 21", 1:7.5
twist
Aero Precision FDE M4E1 Enhanced upper (semi-monolithic design)
Aero Precision FDE Enhanced handguard
ODIN Works adjustable gas block

- Sold -

Upper number 2

Noveske 14.5” barrel 1:7 twist and low pro gas block.
BCM upper receiver black
CMT UHPR mod 2 13.7 handguard black

$600 shipped

Both barrels are threaded 5/8x24. Both have been test fired to check function. I ended up with three 6 arc uppers. Consolidating to one only as these two haven’t seen any real use.

PM with questions. I’ll put some photos up tomorrow.

As Defiance continues to innovate and find new ways to better serve their customers, we have pushed the envelope again. The anTi X is an ultra-lightweight action with integral skeletonized 20 MOA scope mount and recoil lug, that shares the same guaranteed head-space measurement as our Ruckus, Tenacity and anTi custom precision rifle actions. Using pre-hardened 416R stainless for the receiver and a 4340 chrome moly bolt, gives customers the smoothness, reliability and longevity that they have come to expect from Defiance Machine.






Innovative weight reduction. Premium Materials. No compromises.

For more info on the Defiance anTi X, go to https://defiancemachine.com/actions/anti/anti-x/.

Brand new.

Left Hand
Includes a .535" and .588" bolt head.
30MOA rail
Fluted bolt
Pivoting bolt handle
$SOLD, if your dealer will not accept this from an individual please add $30 for my dealer to ship it.

If you need any specific pics please let me know.

Trades I'm interested in.
Beretta semi-auto shotguns
LH Tikka CTRs
LH Remington LTR
Nightforce NX8 1-8
1911s

EP Innovations 2.0 annealer
Works great, just ended up with an induction unit recently and don’t need 2 annealing setups.

Includes everything like new, and works great

$200 OBO

Login to view embedded media
The scandals even involves , wait for it - the gay female Latina DEI hire that the department celebrated during g woman’s history month.

Appears they were stealing cars- Mercedes specifically from an Airport rental service . Hot riding them around for a while because who’s gonna pull them over ? And then selling them to the local chop shop for about 25% of market value .

They cut out the middle man and didn’t hire local thieves or entrap them into stealing 30 luxury cars - nope did their own leg work to ensure max profits.

Where they messed up- they could have just “suspected “ the cars came from the proceeds of crime and taken them under civil asset forfeiture and auctioned them for full market value .

Hi, I was able to look at a full sized prodigy and the grip feels a little too big for my hands. Is there a company that makes a thin grip for this handgun? Thank you!

Bix n Andy TacSport Pro X - Movember edition (purple anodize instead of blue)
Single stage, gator shoe, RH safety
Includes bolt release plate (not shown)
Asking $250 shipped - SOLD

Per title. Brand new, never plugged-in Pixels on Target Voodoo-S/M Raptar TracIR interface cable.

$1,000 shipped.

Login to view embedded media

I'm not wild about bribing criminals, thats like countries paying the Vikings or Mongols not to attack them, and a sign of weakness. I don't like it at all.

However, it might be cheaper and more realistic than having ICE round them up because at the current rate, they're not being captured and deported at near the rate they're reproducing and multiplying.

I'm just afraid it will be large amounts of money spent with half-ass results. How about arrest illegals and confiscate and sell everything they own as an incentive to leave on their own.

Does anyone have any experience working with Zero Dark Precision? Im looking for a gunsmith to chamber and install a barrel as well as do some machining on my Remington 700 to turn it into a M40a3, just looking for a good gunsmith to do it and liked the fact that Zero Dark is local to me. Thanks in advance

Surefire XVL2 IRC, test fit but never fired on a weapon. Includes pouch, wrench and a new RSR-07 remote switch. There is a little ding by the X shown in the last pic - banged it taking it out of my safe. I am the original owner.

$950 $850 shipped. No trades. Discreet Paypal F&F (preferred), venmo, check/mo.

Off to auction for the KVC - shipped Lower 48
Wilcox no longer FS

Anyone have a Manners LRH or Pro Hunter Stock available in Defiance Anti-X Medium Action with Micro Chassis or Hawkins Hunter M5 DBM?

Was going to rebarrel this but figured it would be better to leave the cerakote unmarked and just buy a different action. Started off as a SV. Swapped the 2 stage for a single stage. This has a 24” 1:8 twist. Will come with factory 5 round and factory bottom metal. Only trade would be a T1X or T3X action plus cash on your side. $1000 obo shipped to your ffl.

Can anybody enlighten me as to what action the Browning X-Bolt Action is modelled after, or is it it's own model?
You see rem 700, tikka, etc
The reason I'm asking is I'd love an after market chassis stock for mine but no one offers aftermarket stocks that I can find for a Browning action other than McMillan which I'm not a fan of.
Any help would be much appreciated

$950 Shipped, scope has sat in safe its entire life until I swapped it for the EQL reticle so it has absolutely no wear on it. Do note the box will say EQL reticle, but the scope has the G4P reticle. PayPal G&S only.

SOLD

Looking for a right hand Zeus quick change short action.

I've had these for 10+ years, they are still like new. I've always had them in their case, in the console of my truck for checking out things beside the road. They have never been on a hunt or adventure, I have other binos for hunting and hiking.

The only things that shows some wear is soft case, just standard truck dust, the box shows storage wear.

$1225 shipped

Well try and keep this up to date about what’s going on in our crazy little world. We talk about almost everything under the sun and have a great time doing it! There are bourbon reviews mixed in with our lives of shooting both, elr and prs matches, while running a carnival in the summer months. The humor has been our biggest feedback date though.

Welcome aboard and feel free to offer suggestions and feedback.

Hardly used CasePro in your choice of caliber. 9mm, 38super .40. Has a mount to install a case feeder included
700.00 shipped

Selling my G3 6-36 Mil razor since I’ve now acquired a black one. It has some dings on the turrets and a small scratch under the objective but functions perfectly. $2100 via PP f&f shipped to lower 48

Single stage TT diamond curved $225 shipped