I have a friend who built a beautiful 300PRC consisting of a Defiance Ruckus LA, 30” Bartlien barrel, MDT ACC chassis, Diamond trigger and etc. It is a great system. The purpose of this build was to get more into ELR shooting. However, his ELR involvement has fizzled out and is looking for suggestions on what can do with his rifle so it does not just sit on the shelf. Here are some Ideas we started kicking around:

1. Sell the 300PRC and build something else. The downside here is that he wont get out of it what he has put into it.
2. He is currently shooting the Berger 245gr Hybrid and one thought is to go to a Berger 200.20x (or even the 185gr Juggernaut) in an effort to reduce recoil sufficient to be comfortable using it in FClass Long Range matches (F-Open of course). This would reduce recoil but it is still a lot of energy being used given the smaller bullet.
3. Rebarrel to something like a 7mm SAUM or 6.5PRC that provides a smaller case but still uses the standard magnum bolt face.

Looking for ideas and suggestions….

Selling a used Bushnell XRS 2
Has the G3 reticle
Has been used for 3 PRS seasons, so there is some wear.
Comes with box and sunshade

Asking $620

I only have a few components remaining from the Rifle I had for sale. The 457 action and the MDT stock are what is left.

What is included with the action:
For action and components listed below asking $750 shipped

• CZ 457 Action
• DI Precision Talon Extractors
• Pete's Pillars Firing Pin
• Pete's Pillars SS Extended Cocking Indicator
• Timney Trigger
• Area 419 Bolt Knob
• Area 419 30MOA Scope Base

Stock is being sold separate from action

• MDT Composite Carbine Stock $100 shipped

I am located in Baton Rouge, LA and if you are local and want to work out a deal I'll listen to offers.

Reckon this is about the least amount of back pressure you’ll ever see through a “suppressor”.

Looking to trade my Gen 3 razor 1-10 mil.

I’m looking for a Leupold mark 5 2-10 CMR Illuminated and a Mark 5 3.6-18 Tremor 3 illuminated.

Let me know if you have either or pm me if you have anything similar you think I might like.

Thanks

I have a Zermatt origin now, and I would like to build a TL3 to try AW mags but be able to use some of my origin barrels on the TL3. Ray at Zermatt said PVA used to make a ring to move the barrel out .100 so u could do this, since the origin tenon is .100 longer. I was wondering if anyone knew of anyone that currently makes one. I talked to PVA and they said they don't make them any more.

XLR envy pro Rem700 clones with C6 stock, folder, thumb shelf, long NV bridge, rear weights, ergo vertical grip and two front weights $1400

Terminus Zeus QC RH SA .470 bolt with Elftman trigger $1200
22" 1-8"twist 6.5 Creedmoor carbon barrel less than 450rds on it $500
20" 1-10 twist 308 barrel, was cut from origin action less than 250rds on barrel $250
24" 1-7.5" twist 6 Dasher barrel has about 1750rds on it but was recut from origin action to Zeus action at 1500rds free- barrels are a package deal with the action

Leupold Mark 4 HD 8-32x56 PR2 Mil reticle $1200
APA 34MM low rings $100

Brakes pictured are already sold, make offer on complete package and maybe we can make a deal.

Tyler G Martin. Located in Missouri

Brand new waxed canvas OG shooting bag by Armageddon gear. Standard fill (7lbs).

Clearing out my shooting bag collection, I have a few other bags for sale as well.

Asking $90

Garmin Montana 750i
Rugged GPS Handheld with inReach Technology and 8 MP Camera
Bought it new February 2024 took it on a trip to Alaska, don’t see me using any time soon so up for sale. Excellent shape
Asking $379 $349 includes UPS shipping, PayPal or check
PM for more info or pictures, thanks for looking

As some of yall already know, the mark 5 Leupold scopes are extremely popular and have been dominating in rifle matches all over the country. The only improvement request I’ve heard is the windage dial is a pain. I decided to make a replacement dial for the scope to help this issue.
The New Competition Wind Dial is also larger and much easier to read.
Wind dials are 85 dollars and available at the link below.
https://diprecision.com/di-precision-competition-wind-dial/
Below is also a before and after picture.

I recently had the good fortune to play with a Franchi Momentum elite varmint rifle chambered in 6.5cm. If you too find yourself a little curious I wrote down my thoughts on the rifle for those interested.


Read Franchi Momentum

FS: AGM adder ts50-640
Bought in February 2024 still has 4 years of warranty left. Works great and as it should. Can send more pics and loads of videos upon request has been a great scope just upgrading.
2800 tyd

For sale:
AGM adder 50 - 640
Bought in February 2024 still has 4 years of warranty left. Works great and as it should. Can send more pics and loads of videos upon request has been a great scope just upgrading.
2800 tyd

Like New and Early 2011 NightForce NXS 8-32x56mm with Mil-Dot Reticle. Non Zero Stop scope and Perfect for your MK13 Build.
This is Model C-308

https://www.eurooptic.com/nightforc...Pv9EPC-MWOLj0hTfMrj3f_lu5VmijGEpqONYj0GfSBmeO

$1400 Shipped

*****Reduced to $1200 Shipped for the Scope & Mount Combo*****

Brand new 6GT lone peak arms comp contour Fuzion/razor prefit, chopped down to 24” by Drew at Blueprinted. $575 shipped.
1:7.5 twist

Search didn't gen anything up. Any owner/shooter feedback on their factory rifles? I have quite a few of their barrels in my semi-autos. I see prefit barrels available for the elevation/elevation MTR models and with the current prices it would be difficult to build a rifle equivalent to their factory offering.

I am looking for the Badger 306-55 34mm diving board / coaxial LRF mount for Nightforce Mounts.

Thank you!

Hi everyone. Looking for a very specific part that's been discontinued for 5 years. Hoping someone on here has one they'd part with. Willing to pay a premium for it.

Specifically it's the diving board that is compatible with NF 34 rings. It's the 306-55, not the 306-155.

Thank you!

Fairly new area 419 grip changer. Used a hand full of times. Has a very small mark on it. Mainly just rode in my bag. $100 tyd. PayPal f&f only.

What scope would yall pick between the two. The Cronus has a zero stop and japanese glass. The Ares has locking turrets and is made in china. I can get them for the same price.

I have a New Defiance Anti X - Short Action - Magnum Bolt (.550) with a Wyatt's cut (for DBM bottom metal or chassis) in stainless.

Decided to make my current Anti X a switch barrel set up instead of running 2 separate rifles.

$1400 shipped to your FFL

No trades at this time please

My buddy sent me this link, sorry its on nazibook. This lady is hilarious. My wife and i were laughing so hard we were crying. I hope this link works, I tried to find it elsewhere but could not.

Login to view embedded media

FFL to FLL. Cleaning out inventory.

I see there are other misc truck threads running, so hopefully this isn't too repetitive.

I have always owned a Toyota truck or SUV so I have no allegiance to any of the major truck brands. I am looking for the best diesel truck for general use (driving to work, range, etc.) AND for hauling a 25-30ft camper trailer around the state and region. 4 door and front and rear bench seats are a must. It will be a squeeze but there will be times I need seats for 6. If and when I purchase it will be used. The major points I am looking for is reliability, price, and fuel economy. I have pulled a multitude of fully loaded work trailers with gas and diesel trucks and I have no interest in going with a gas truck. Especially in the mountains of Colorado I don't want to be struggling with a gas engine pulling a loaded camper over Vail Pass or wherever. I know certain generations of trucks have pros and cons, and brands as well, so if you have any words of wisdom please educate me! I would prefer a relatively new model with <50k miles.

For sale are 2 accurate mags like new condition.
Accurate-Mag Magazine AICS Long Action 3.850" OAL. MAX OAL 3.750"


Qty. 1: 5 rounder
Qty. 1: 3 rounder

Asking $125 shipped total for the pair