You know how it works. I'll start.


Johnson

My google failure may be illsutrated by this thread . . . .

I have a DSMS AP4 308. It has worn a Leupold HUNTING scope for a while.

The Scope has been placed on a HUNTING rifle.

Looking for a proper scope set up for a General Purpose "Battle Rifle."

My thoughts go toward ACOGS as this 308 easily makes hits at 300 yards (16 inch barrell).

I am looking at the TA11j-308 (3.5 fixed power w/ tritium reticle) (this one has the range markings for 14-20 inch barrelled 308s).

Eye relief is good good for shooting up close (but not door kickin' SWAT raids close).

Any thoughts? Have looked at nightforce 2.5-10s, but not "thinking" about "designated marksman" optics.

BTW-Usage is some hunting, plinking, and Carbine Classes. Reagan was president when I was young enough for all the fun stuff.

BMT

sold

Scope was mounted and then never used, all accessories included. Rings are 1” ultra light 2 screw.

$500 shipped Zelle

*not looking for any trades*

I thought i would like the quick detach feature and move my scope around often. I don't. If that was it i would probably just keep it, but now i am trying to out a parallax wheel on my scope and the levers get in the way.

I am a noob and cheap. (I know, this hobby is anything but cheap)
Have LH Tikka magnum action and want to build a LH 6.5 CM. Have had no luck trading for Standard action or bolt. With the correct bolt stop, can I make the magnum action feed 6.5 CM? I already hace a Tikka pre fit and LH MTD inletted for Tikka

I have a very slightly used ZCO 527 MPCT 1 FDE with Spuhr QDP-6002 mount. The scope was used on my desert tech for less than 50 rounds, probably less than 30. I cannot find a single place the scope is blemished, also comes with Aadland caps. Scope is pristine! I’ll sell the scope for 3200 and if you want the mount too I’ll add it for 300 more so 3500 shipped. If you are interested in the mount it’s 350 shipped by itself.

New CZ 457 MTR Manners. Rifle comes with Area 419 Weighted ARCA and Area 419 30 moa scope rail.

Asking $1600 shipped to FFL.

Factory complete ambi lower from KAC. received new.


Discounted because of a scratch down the ejection port when the lower slipped on a bench. Used at the range once.

$1450 shipped to your FFL OBO. PayPal ff, Venmo, Cashapp.

For sale is a used BURRIS XTR II 2-10x42 34mm Tube Illuminated FFP G2B Mil-Dot Riflescope & a used 34MM Burris P.E.P.R. Mount for $525. This optic and mount are both in perfect working order. The glass and tracking are outstanding. The mount is rock solid. There is very minor superficial wear on the optic as noted in the pictures. This optic and mount pair well with any accurate gas gun. Great for the novice shooter eager to learn the dark arts, the seasoned rifleman or the hunter. This sale includes optic, sun shade, flip up lense covers, manual, box, new Duracell CR2032 battery (not installed), 34mm Burris P.E.P.R mount for $525. Shipping is $20 to CONUS only.

McMillan Hunters Edge McWalnut. Inlet is for Defiance LA RH, barrel channel Bartlein 3B. Red pad with Pillars installed. Floorplate inlet is BDL. $550 Shipped.


Q Cherry Bomb in 1/2-28. Whistle Tip and Plan B for Alpha(Alpha- 1.125x28 - This model will fit many pistol silencers like the SiCo Alpha mount silencers (Octane, Omega K series, Harvester) All for $165 Shipped.

Paypal FF, MO, Credit Cards

MDT ACC Premier Gen2 chassis for a Remington 700 SA black in color . It’s brand new in the box

900 shipped

For sale~ KRG SOTIC rifle 6.5 Creedmoor, 26” Mark Chanlynn barrel, premium option at the time, 1:8 twist, 5/8x24 threaded. 600 round count. Sako green furniture. Also have black furniture. Low double digit serial number. Non-folder. Midas competition trigger. Full ARCA rail, ARCA spigot with night vision rail. 2 KRG 5 round magazines, 4 KRG 10 round magazines, and KRG Shooting mat/case.
Updated price because a lot of people wanted a folder. Good luck finding one.
$2500.00, buyer pays shipping and insurance. No trades or parting out. I would consider a trade towards a left hand Accuracy International AT. But those are also insanely rare.
Scope and mount not included. But could be included for a bit more.

Looking to buy Binoculars with rangefinder.
Let me know what you got.
Thanks

FOUND SOME. THANKS

Like new Pentax PF80-ED with 20-60x (8-24mm) variable eyepiece. $775 shipped. Never seen the field. These are well regarded in the benchrest and birding world. Excellent for spotting trace with the optional wide angle eyepiece.

Also have a new fixed 26x (20mm) wide angle eyepiece thst is excellent for spotting bullet trace. Selling this separately for $215 shipped or combined with the above for $950 shipped.

Will look at trades +- for desert tech srsa2 parts/accessories, handguns, rimfire firearms, turkey gun, etc.
You can also click on my username to see other items i am trying to move. I'll combine shipping as much as possible.

---

TriggerTech Diamond Rem 700 or clone

Single stage right hand safety

Pro Curved trigger shoe

Installed on PRS rig for 1hour, never fielded

Ended up preferring a Bix Tac Pro so Diamond can go

Sold shipped

Hi all,

I am mounting a Premier Reptiles 5-25x56mm Tactical scope on a DTA SRS A1 rifle. I have a 34mm DTA single piece mount. I have read opinions both ways on the subject of Blue Loctite and I am still wondering if I need to use it if I torque the 6 screws on each of the two scope rings to 20-25 in/lbs. What is your advice?

Hey all, trying to collect info on the various options for a one-step trim/chamfer/deburr step, with a very strong preference for something that indexes on the case rather than a stop-collar like on Forster, LE Wilson, etc. Below are the ones I'm aware of, are there any I'm missing that'll do it all in one operation?

Case-Indexing:
- Henderson
- Giraud Tri-Way
- Trim-It II

Collar-Indexing:
- Forster
- RCBS
- LE Wilson (I think)

Thanks for any help the Hide can provide.

Area 419 Hellfire brake. 30 caliber, stainless, 5/8x24.

$110 shipped

For sale *or trade*.

Been running it for the last 4-6 months and it’s been fantastic, however I want to try something different. The only cosmetic flaw with the optic is a light ding around the ocular lens, only visible without the scope caps, or when the scope caps are off and you’re at 35x magnification. Apart from that she is in beautiful condition. Comes with box.

•For sale price: $2,950 shipped

•Or, trade a Schmidt & Bender 5-25 pmii (maybe 6-36), and it must have the gr2id reticle. We can work out the values through pm’s.

This is a like new C570 ATACR 7-35 MIL-R F1. It has the box, sunshade and all the box bling. Asking $2500 (edited and changed here) shipped insured to your door.

Selling a like new Vortex Diamondback HD 20-60x85 spotting scope. Put it on a tripod three times to look through it. Bought a Althon not long after I got the Vortex.

Asking $300 shipped Zelle, PayPal, or Venmo all work for me. Thanks for looking


Sold to theDAE

For Sale: McLeod Precision aluminum bag rider for MDT ACC Elite Chassis (will also fit newer ACC Premier Gen 2 Chassis). Solid aluminum bag ride that is Cerakoted black in color. This part is brand new, never been outside, handled only. $Sold

How many rounds does it take to wear out a
22 lr barrel?

I guess its kind of an oxymoron to some (most), but I'm having a hard time liking any of the barrel nut options for savage shoulder-less barrels. they all have a savage type taper to them. Is there a reason for this? I'm kinda digging the PVA tikka barrel nut with the straight taper. I've searched the interwebs to no avail... could I have a smith spin one up or is there something I'm missing?

What I'd really like it a straight taper with a castle type wrench interface (savage barrel nut wrench) , maybe even a lip. I feel like this would add just a hint of cheytac/pipe gun feel to my build.