.22lr with six extractors . Not sure which ones are new or old. One marked E for eley. Had it as a spare works great. $180 shipped. Paypal friend or venmo

Looking for a Matrix Pro or Pro II. With Standard weight buttstock. Preferably the Pro II. Thanks

Does any anyone know where else I can get this stuff besides directly from the manufacturer? Midway USA used to sell it for about $18, the manufacturer wants $45 plus $26 shipping for an 8 ounce bottle.

Set of used Hawk Hill Talon bipod feet for sale. Good condition. I sold the bipod that I bought these for, so I don't use them anymore.

$40 shipped

I have been playing around with JPs rilfe builder and I am planning on ordering a SCI-20 in .223.

The two biggest things I cant make my mind up on is barrel length and stock.

I'm stuck between 16/18/20inch

Its either the UBR or ?????????

More than likely wont get shot much past 6-700. Really want just a fun range gun and something to try PRS gas gun with.

For sale: Steiner Laser rangefinding binoculars, used but in good shape. I think I bought these in 2018 or 2019, etched reticle and 8x porroprism light path. Super easy to acquire targets with these.

Glass is clean and pretty and electronics work spot on. I bought higher mag binos and don't need these now.

Includes Steiner nylon case and swaroski binocular cradle, with a small arca rail on the cradle.

$1100 $900 shipped and insured to your door, or possible trades for unchambered proof or bartlein carbon barrels.

Video of the bore camera footage.
Login to view embedded media
This is my PRS barrel it’s a Bartlein and I’m sure it’s something I did and not the barrel. I’m looking to isolate so I don’t do it again. Barrel has about 1k rounds on it shot a few matches. For the most part I clean after shooting. Recently switched to Thoro clean. Prior to was using Iosso Triple action and bore paste, accompanied with wipe out patch out. I don’t think it’s the Thoro clean, but it is a newer product. Once I’m done cleaning I run a patch of alcohol followed by a few dry patches.

If I only fire a few rounds 30 or less I won’t clean, or if I’m using it for hunting predators on my property I’ll leave it fouled only taken a shot once a week or two weeks.

Im wondering if my last hunt caused it. It was about 20degrees out and I was out with my rifle for about 2hours. I brought the rifle and all my gear back into my 68 degree house. I am thinking condensation in the barrel then sitting for a week and a half may be the culprit.
I discovered after going to load a round and take a shot. I had trouble closing the bolt but then it closed. After firing the round I had a super sticky bolt. I took a video of the bore camera images. Did some before and after a very light cleaning. Pitting looked way worse prior to cleaning. I thought a chunk was missing.
I reached out to gun smith. He asked how the brass looked and it was fine. So I’m going to shoot a few rounds to see how it is.

Any feedback is greatly appreciated!

So i use this often as a secondary means, with electronic device, very close in direction, however would like to use it's capability seeking angular slope line of sight to find angle in degree,

new member and looking to learn more on precision shooting out to 1,000 yards. Any members here from PA? Mostly central PA? Mifflin County Sportsman Association isn’t to far from me.

NOTE: ANOTHER PERSON IS ATTEMTPING TO SCAM PEOPLE AND SELL THIS ITEM!! IT IS SOLD!!!

BNIB: SAC Modular Action Wrench w/ Bumpers and #5 / #15 heads.

$145.00 shipped

PP FF or Zelle

<Picture Removed to protect folks.>

I'm having issues with the amount of vertical play I'm getting with my AICS magazines. The mag feeds just fine if it's sitting anywhere in between the very bottom or very top positions of insertion. I've look around and it seems this much free travel up and down is normal but I just can't wrap my head around that.

- Action - Zermatt Origin LA - which comes with Remington style feed lips. Capable of accepting AICS Long, CIP, and CIP+ length bottom metal and magazines.
- Cartridge - 7PRC
- Bottom Metal - Grayboe M5 DBM 'Long' 3.715"
- Magazine - Accurate Mag 5rd 3.715" (300win mag length)
- Stock - McMillan Game Warden LR - Inlet for Rem 700 Long Action clones - Pillars installed

With a loaded magazine and the bolt open, there is approximately 0.25" of vertical travel between the magazine bottom position where it is stopped by the mag catch, and the top position where the top of the magazine makes contact with the bottom of the action/action feed lips. The amount of vertical play strikes me as excessive and seems like it would be temperamental with regards to feeding, and no surprise, it is.

Login to view embedded media
With the magazine in the absolute downward position the bullet tips gets pressed into the vertical portion of the action just below the feed ramp and will feed no further. This might be fixed with some tweaking of the front portion of the magazine feed lips. All of the mag tuning videos I've seen are for short action mags and suggest a consistent gap of 0.4". My mag body has a noticeable taper front to back and I can't seem to find any recommended spacing for the 7PRC/long action AICS Mags.



Login to view embedded media
With the magazine pressed all the way upward the bolt gets stopped by (I believe) the back of the magazine. It might be the back of the feed lips. I will try and verify. I've seen suggestions to shim the bottom of my bottom metal to limit the amount of mag insertion, but that will simply exacerbate the problem described above where the round feeds too low and is being driven straight into the vertical face of the action. I've also seen comments that the weight of a loaded mag will hold the mag low enough to keep from being over inserted, however what happens after I fire 4 rounds and now I have a mostly unloaded mag?

Login to view embedded media
My next step is to reach out to MDT and see if their adjustable mag catch could be modified to fit into my Grayboe bottom metal. Any other suggestions appreciated!

Perhaps it's the engineer in me, but I just can't figure out the sloppiness and excessive vertical play that seems to be considered acceptable in this system. Having a rock bottom stopping point only on the bottom direction of travel with no purpose driven limit at the top seems like a system destined for failure.

Thanks to all for your time and insight!

Just getting into reloading. My first attempt is loading some stuff up for my coyote rig.

Gas gun
6mm arc
70gr sierra blitzkings
Xterminator powder

Looking over the data between Hornady and Sierra I had a question on max load range I was hoping some more experienced guys can help me on.

Hornady list 32gr max charge for 65 gr and 30.4gr for a 75gr. In comparison Sierra list 27.7. The oal of the blitzking falls between the 65 and 75gr vmax.

Any reasons for the conservative numbers from sierra?

Login to view embedded media
So the governor of NJ did t want a journalist at his church service political endorsement rally so he ordered the pigs to remove the man - which they did cause what else would they do ?



Login to view embedded media
This guy had an epileptic seizure- which of course caused pigs to beat taz and arrest him - cause what else would they do ?

Hope everyone enjoyed the double feature of the finest and bravest of hero’s serving their community!

Lonestar LT-5 Rotary Brass Shell Case Tumbler Polisher Reloading with 20lb SS (chips) Media included.

Brand: Lonestar
Type: Reloading Brass Tumbler
Model: LT-5
Country of Manufacture: United States
Dimensions: 19" L x 14" W x 16.5" H

Features:

• Large 60w motor
• Wet or Dry use
• 40lb maximum weight capacity
• 5.25-gallon fluid capacity
• Stainless drum hardware
• Largemouth for easy loading/unloading 4 inches
• Tools for drum removal
• Tumble, Polish and Clean
• Holds up to 500 cases of 300 Win Mag or 900+ of 6m Dasher

Includes:
Base motor unit
One tub & 2 lid assemblies: One lid that seals, one lid that has an adapter and drain holes for flushing water through while it’s running.
Approximate 20lb Stainless Steel chips for cleaning media

Conditions: Excellent working condition; it appears to be lightly used. This thing will last for ever!

Price & Terms: $400
No trades, please. 5% Discount for Cash.
Local face-to-face transfer can be arranged (S Denver CO). Buyer pays shipping
Message me (Lou) for details.
If you’re a serious buyer, send me your address and I’ll try to get a shipping estimate.

LNIB 300 Norma Mag Dies

• Redding Type S Elite Neck Bushing style FL sizing die
• Two (2) neck bushings included: please specify which two diameter neck bushings you want included
• Redding Type S Elite Neck Bushing style Neck Sizing (only) die
• Micron Precision Series ultra precise fine thread micrometer adjustment bullet seating die, with seating stem for Berger 245 LRHT and Hornady 230/250 A-TIP bullets

WTT My Curved Larue for your Flat. Must be new or near new.

Short version woman comedian implies two dudes are fudgpackers (seems they weren’t) they heckle her back but better and she goes batshit.

Login to view embedded media

Decided to split up this package, but overall great lightweight setup. I have not shot this rifle to validate grouping, but was told it was from a high end smith out in UT and that it was a proof stainless blank that was used in the build.

Lone Peak Fuzion Action
Triggertech Field Trigger
Mesa Precision Stock- overall great condition with only mark I could find is on right side right above trigger (see pics)
26” Diamond Fluted, Stainless Barrel with blended thread protector
SARV Stalker M5 Bottom Metal/Mag
Rifle weight: 7lb 5.6oz on my kitchen/mail scale

Asking 2300 Shipped/Insured to your FFL;

Note this is also posted on longrsngehunting.com.

New
$75 shipped

Shipped
Buttstock part is painted gap camouflage

What is the difference between Federal Premium .308 GMM with 175 gr. SMK and the Federal Premium 7.62.51 mm with the 175 gr. SMK loads?

Thanks

Hey guys,

I've got some basic questions that my google fu is weak on. I'm just going to go ahead and list my questions in no particular order. Any help would be appreciated. These questions are only applicable to Thermal as that is what I am interested in.

1. Do you need an illuminated reticle to use with a clip on? I'm a little confused as to how visible the reticle will be without illumination overlaid on a digital screen.

2. Obviously this is clip on dependent and seemingly subjective but how much low end magnification can you get away with using a clip on? I was hoping to be able to use a Mk5 3.6-18. I'd rather not buy an LPVO if I can avoid it. By the same token, if say my optic is 3.6 on the low end, will this be similar to listed native magnifications on thermal scopes, ie "base mag of 2X". Would 3.6 effectively be my "base mag"?

3. To the best of my understanding, there are only a few commercial grade clip ons that supposedly don't require collimation. The Sig offering and I believe the new Armasight clip on. Am I missing any?

4. RE: Zeroing profiles and collimation. Lets say you have four guns and four zero profiles. Do you have to collimate the optic each time you place it onto a different platform and switch zero profiles or is that somehow saved within the zero profile?

I think that about covers my questions for now. If I think of anymore i'll add em!

Thanks guys!

Parting out a recent Rem 700 LA build on the 4.0 chassis, minus barrel, all prices are shipped, with action FFL to FFL. Setup had 100 shots at the range and most parts come with all original paperwork and packaging. Please DM for more details and pictures if interested in any of the below.

-Element 4.0 Magnesium Chassis for Rem700 LA 3.850 magwell size and clones, folding adapter with carbon buttstock and carbon grip $1150
-BAT Igniter LA, Mag Bolt Face with pic rail $1100
-Ti Pro 5, 5/8-24, .30 cal, charcoal cerakote, tapered to .900 magnum muzzle contour $175
-Accurate Mag, 300 WM, 3.850, 3rd & 5rd $80 each
-BAT action wrench $55
-Trigger Tech Rem700 Special, 2-stage, flat face $195
-Nightforce 30mm 6-screw, low .885 ring set $130
-Maven RS.3 Black/Grey, 5-30x50, SHR-MIL $750

I have a rugged surge 762. I really want to use for PRS. The suppressors that have a muzzle break end cap tend to work better for this kind of shooting. Does anyone know of a company that does custom end caps?

As the title says, I am curious what optics folks are enjoying and why? There are no wrong answers, be as specific or as vague as you like. It does not matter if you have a cardboard tube with toothpicks for a reticle, a $75 Walmart special or a $3000+ S&B.

I really enjoy this Leupold Mark 4 2.5-8 that has been mounted on my hunting rifle for years. The magnification range is perfect for Elk hunting in my corner of Washington and the scope just looks cool to me. I was able to get the optic for a great price when I was in the military and it has always been a performer. I removed the scope from the rifle(sent off for a new barrel install) and after 5 minutes with a scrubby pad and some 409 it looks nearly new.