Thunder Beast CB Mount compatible muzzle devices. These do not need timed.

17-4 H900 with a bead blast finish

$85 each and I have both 1/2-28 with .223 cal bore and 5/8-24 with .30 cal bore.

I have quite a few ready to ship.

All are l.e. Wilson micrometer seating dies in great condition
6x47L
6.5x47L
22-250
22-250 ai
7 saum
6xc
6.5x55 GWI
6xc is new never used the rest are in like new condition. Still have boxes and the bases for all of them. 75 bucks a piece PayPal f&f or Venmo.

Another one of these threads sorry in advance. I am looking for a scope that is around the 5-25 power. Sub $750. I want at least 5 on the low end 25 on the max. FFP IR MIL, 34mm tube. This gun will sit on a varmint and target trainer rifle. I will also use it for 600 yard PRS matches. The gun is chambered in 223 with a throat and magazine that can accommodate heavy for caliber high bc bullets that the 22 arc would launch. My goal is to shoot varmint out to 600 yards. So my need on the clarity side is at 25 power I want to be able to see coyotes/dogs etc. at 600 yards.

I have looked at the following and am having trouble because I cannot look through them all side by side. Main contenders are strike eagle 5-25x56, Arken EP5 5-25 and the Gen 2 Athlon Ares ETR 4.5-30. I've never owned athlon or looked through one. The reticle seems good but I've read they have some tunneling. I really like on the strike eagles how the eyebox has almost no tunneling the body just disappears. The arken reticle and ir is actually preferred, I have found in low light fully illuminated reticles really block your vision. The strike eagles ilum is too much and not useful for low light. So in summary arken has preferred reticle as it's kind of hybrid target and hunting, strike eagle for the thin eyebox effect and athlon ares I have no experience and I hear lots of hyperbole on glass quality which I no longer believe what I read on the Internet lol. My thought is the glass on all three should be relatively close but you have people saying arken is just as good as night force atacr, same thing with ares oddly enough there are hyperbolic reviews of the strike eagle as well as a lot of people call them pieces of shit lol. Your insight and expertise is greatly appreciated...

22 Fat Rat with 90 SMK, 22 Fat Rat with 95 SMK, 6 Dasher with 105 Hybrid

Precision AR upper built on a Seekins SP3R upper. It's in a wildcat called 22 Fat Rat, which is basically an Ackley'd 22 ARC. It 's designed to mimic 6 Dasher ballistics in an AR-15 Platform. Muzzle threaded 5/8-24. Rifle +2 gas system. 329 Rounds on the barrel. Also have a boltgun barrel threaded for an Impact 737R and modified mag, if interested. Build for PRS gas gun, but can no longer compete due to a back injury.

-Seekins IRMT Upper
-Seekins IRMT 15" Handguard
-JP Enhanced bolt carrier group
-26" PacNor 6.5T 3 groove stainless barrel
-SLR 0.936 gas block
-Just under 300 formed cases (from Lapua 6.5 Grendel)
-JGS Reamer
-PTG Go and No-GO gauges
-Impact 6mm Muzzle Brake
-Whidden 6mm Fat Rat die set with 2 intermediate forming bushings (need a 0.251 final bushing)
-Modified Lee seating and Factory Crimp dies
-Whidden shoulder gauge
-Modified case for Hornady bullet comparator
-Brownell's bore guide
-One 17rd. E-Lander 6.5 Grendel Magazine
-Spare Rifle +2 gas tube
-JoeBob bolt saver

27.5gr. of H4895 gets 88 ELD-M up to 2945 fps.
28gr. of H4895 gets 88 ELD-M up to 2990 fps.
Fireforming load is 25gr. of H4895 @ 2673 fps.

$1900 shipped

Would consider the following trades;
-Dillon RL-1100 or CP2000 set-up for 223/5.56
-Glock 21 Gen5 MOS
-USP45 Tactical
-Eotech XPS3
-Seekins MCSR 10" M-LOK Handguard
-Wilcox NV mounts
-Streamlight TLR-VIR II
-TBAC Take Down 22 Suppressor 100% certificate

Crye Nightcap with Amazon shroud. (shroud requires shiming) $90 shipped




Q Plan-B mount for the AAC Tirant. Used once. Decided to go a different route. $90 shipped




-RCBS steel 25 ACP dies. $40 shipped
-Dillon XL650/750 7.62x39 conversion 21117 (includes 6.5 Grendel casefeed adapter) $110 shipped
-Swage It - Small Primer Only for Dillon XL650 $90 shipped
-72 50AE cases $25 shipped
-147 5.7x28 cases $35 shipped
-Hornady bullet puller collet #9 $15 shipped





Custom AR-15 Handguard. Project goal was to create a handguard that would allow up to a 1.8" suppressor to be tucked under it. Sling QD holes were also added. Needs to be re-finished. Mounts to a BAR compatible mount (included). Has some minor marks from the chick that should get hidden with a light bead blasting and cerakoting.

$65 shipped




-1/2-28 22 cal. muzzle brake $75 shipped
-JMAC Dead Air Wolfman 5/8-24 mount/brake $60 shipped
-Shockwave Blade Pistol Brace $35 shipped
-CMMG 4.5" 22LR AR-15 barrel $100 shipped




-Texas 1836 Glock 43x brown leather OWB holster and mag pouch $65 shipped
-Glock 43x kydex IWB holster and mag pouch $65 shipped
-Gen2 Sheild Arms G43x/G48 15 round magazine $35 shipped
-Griffin Armament 1/2-28 threaded G48 barrel $80 shipped
-Trijicon G43x/G48 HD XR orange night sights $100 shipped
-G17 night sights (came on used pistol - Believe they are Trijicon) $50 shipped
-Impact +1 S&W Bodyguard mag extensions (3) $20 shipped
-Vickers Extended Slide Stop for G43x/G48 $20 shipped
-Vickers Magazine Catch for Gen4/5 G17, 34, etc... $12 shipped
-Vickers Magazine Catch for Gen4 G20, 29, etc... $12 shipped




Tacsol .22LR conversion for G17/34. Runs well with recommended ammo. Five 10 round mags, four 15 round mags. Some still in packages. Spare parts.

$450 shipped

Would consider the following trades;
-Glock 21 Gen5 MOS
-USP45 Tactical
-Eotech XPS3
-Seekins MCSR 10" M-LOK Handguard
-Wilcox NV mounts
-Streamlight TLR-VIR II
-TBAC Take Down 22 Suppressor 100% certificate




MPA picatinni mount for Harris bipod. $60 shipped




6.5x47L barrels. Were on Surgeon actions. Both have +2500 rounds on them. $50 + shipping each


For brass, buyer pays shipping on whatever flat rate box they fit in. Will combine with other things.

Looking to sell a tripod setup. Purchased for coyote hunting but liking a bipod setup better.

Tripod is a Leofoto SA-403cx
Head is a RRS BH55. HEAD IS SOLD!

Tripod looks and functions like new, only taken out twice maybe. $325

Looking to sell some more stuff! Might have more to add. Feel free to ask any questions.

Brand new - Lantac 16" barrel 223 wylde - $250 tyd
Just looking to go in a different direction. Any questions feel free to ask. If one really needs pics, or interested in it. Will send pics


Bench Source Annealer - $450 u pay shipping, or $525 tyd. Buyer picks


CEB Bullets - 338 LM 277 gr SF $380 tyd
Selling for what I paid for them.

I bought this, can't return it, but it does not fit me unfortunately. Already ordered the proper size. It seems this new Gen fits a bit larger than usual, so I am having to go down to XS. This has never been worn. Tried on once and put it back in the bag. Brand new. These are $320 new.

Asking $220 Shipped.

Curtis Axiom with 26” Bartlien 7 twist. Cut by Extreme Shooting Sports. Only 200 on the barrel. Berger 108 @ 2950. Shoots .250 or better. Ace brake, Trigger Tech special flat shoe. KRG Bravo with full rail.
Vortex Razor gen II 4.5x27 mil. Vortex rings.
200 alpha brass once fired annealed and cleaned. Ready for sizing.
$3700complete setup no bipod shipped.
$2300 no optic shipped.
Ckypod single pull available for extra $500.

Less than 100 rds

1 magazine

Bushingless updated model

$500 FFL to FFL

Up for sale is a .223/5.56 (.223 Wylde Chamber) 11.85" Long Stroke Piston upper from Primary Weapon Systems. Super smooth (push, not a snap) recoil impulse, 3 position adjustable gas block. These are the best suppressor host uppers on the market, IMO. Little to no gas in your face, super clean running and light recoiling.

$945 picked up or shipped

Posting this for a friend. I’ve sold a few items on here for him.

Selling for friends is against the site rules and if your check out doesn’t put it it again you will be banned. Go read the site rules before posting again.

2021 Sniper's Hide Forum Rules

Our Membership makes the forum, so understand that not all members have the same level of seniority. Best practice is to learn the dynamics of our community before jumping in with both feet. 2021 Sniper’s Hide Forum Rules Welcome to Sniper’s Hide 2021, a site for the serious tactical marksman...

www.snipershide.com

Battery cable (factory Insight) is brand new (BNG-573 Rev. 2) -$250 Shipped

-------------------------------------------------------------------

Fuji 50mm f/1.0

PLUS

(99.00) B+W 77mm Circular Polarizer MRC Filter-BH #BWCPMC77 • MFR #66-044844

Asking: $1200.00
$995.00


-----------------------------------------------------------------------

For sale is an excellent condition set of EOTECH Bino-NV. Full kit, including Wilcox L4 G24 mount, case and all accessories, manuals and paperwork. Tube FOM is
(Elbit) is 2409 and 2530. These have adjustable diopters a sub 10" focus distance, waterproof to 20 meters and a 25 hour battery life on a single lithium AA battery. These have a 10 year warranty.

$9995.00 Shipped

Looking to buy as much of this stuff second hand to avoid paying MSRP+ tax.

I’m okay with cosmetic defects, just looking for functional at a good price. PM with what you have and your price.

1. SC-ARC RRS-LOCK® Dual Arca/Pic ARMS-17s Bipod Lever Clamp

2. D.Wilson LMT MWS 15.3” ARCA rail

3. SPUHR 6002M

4. SPUHR 6602M

5. SPUHR A-0019D (need 2)

*looking for black color SPUHR mounts

ADM UIC Wilson Combat Super Sniper .224 Valkyrie Build - Premium Components

I am selling a .224 Valkyrie AR15 build. I have never shot it but it should shoot good considering the components used. I do not wish to part this out at this time. Components used in the build:

ADM UIC Billet Lower Receiver
ADM UIC Billet Upper Receiver
Magpul PRS Lite Adjustable Stock
Cross Machine Tool 17" HDM-A2 ARCA Swiss Rail
Aero Precision 224/6.8 BCG (Pulled from another build has probably 50ish round count)
Wilson Combat 22" 224 Valkyrie barrel with black Armor-Tuff
Wilson Combat gas block
Geissele Automatics G2S Trigger (Pulled from another build and has probably around 1500 round count)
JP Silent Captured Spring Gen 2
Radian Raptor Charging Handle and Radian Talon Safety Selector

I have a little over $1900 in the build. Im asking $1500. Most parts are new and never used. I have noted the parts I pulled from other builds with approximate round count. You will need a flash hider or muzzle brake. I will ship one with it to protect the threads but its nothing special. There is minor scratching around end of the barrel which is pictured. Will ship in a cheap plano case and box to your FFL.

Rifle weighs about 8lbs 14oz unloaded.

If you are in Southwest Missouri we could probably meet.

Binocular Block:
Tired of trying to mount your binoculars to your tripod with the "one size fits all" clamp? I have designed 3 different sizes one for 32MM, one for 42MM and another for 50MM objectives which cradle your binoculars and fit like they should. These have molded ARCA rail bases to mount without having to use any adapters and have 2 threaded 1/4-20 holes for attaching a wind wand or other accessory. Bino blocks will ship including the velcro strap and buckle as shown with everything you need to mount your binos. Available in black, gray, safety orange or safety green. These weigh approximately 1.2 ounces each.

Binocular block in any size or color for $35.00 each shipped


Bipod Buddy:
After getting tired of setting my bipod down to shoot a stage and then trying to remember where the heck I left it, I finally designed a simple yet effective way to stow your bipod, rail mounted bag or anything with a Arca mount directly to your tripod. These have a built-in stop so you can slide your bipod over the top and the buddy holds it in place without the need to tighten it, includes the velcro strap. These weigh approximately 0.5 ounces each.

Bipod Buddy in any color for $20.00 each shipped


Wind Wands:
I made a few of these for shooting local matches and now offering them for sale to members of this forum. These are made from carbon shafts using stainless steel ball bearing swivel, 1/4-20 threads and with the included thumb wheel they weigh 1 ounce each.

Wind wand as shown for $25.00 shipped

Order any 2 parts and take $5.00 off, order any 3 parts and take $10.00 off! Also willing to design/print any parts you might have in mind just shoot me a PM. These parts are 3D printed right here in the USA and should you want any parts personalized with special colors, text or logos that is also an option.

Selling a Mub I have laying around $115 shipped to Lower 48
Black

Login to view embedded media

A elderly pastors wife who’d been crying about a bad diagnosis on her grandson- they didn’t t want the police to come in so they breached the door and roughed them up.

The pastor is a retired policemen - and being old was still enough of a trigger to abuse them and damage their home

What the fucking fuck is wrong with these pigs?

Proof research 7 PRC Carbon Sendero barrel - Defiance Pre-fit 22"

Black Cerakote

Asking $790

Seeing some chatter that Vudoo closed up shop

Would like to trade my mpa matrix pro SA with internal weight kit. For a XLR 4.0 magnesium medium chassis would
Be my first pick but would do a short or long as well. A XLR magnesium short Atom chassis. Wouldn’t mind a manners LRH or Pro Hunter in short, medium, or long with mini/micro chassis