Cleaning out the parts bin and I’m just selling all this as a lot. I don’t want to mess with individual sales.


Let this curse bestow upon another poor soul!


SOLD

Does anyone remember in the early 2000’s Unertl (or maybe it was leupold) had scopes with a cam adjustment built into the turret. Similar to the rear sight adjustment on the M16 with 100m detents.

I think IBA had these on M40 clones in that time period as well.

Where to find info/ history of these?

ISO Bushnell elite 3.5-21. H59 reticle or other. Used preferred.

doing ADL to BDL conversion with detachable mag , and new trigger , trigger works fine , bolt stop functions , mag functions but when i tighten the forward screw the bolt will not articulate , loosen to where its just about to cinch and the bolt functions freely , the slightest amount of torque and the bolt locks up , rear screw 40 inch lbs , stock is a factory Remington BDL Black composite free float

i tried loosening the rear screw and tighten the forward screw only and still does it

SaveShare
Reply

Going in diferent direction and want to sell this Tikka T3 Bartlein MTU 24" in 6.5 PRC
0 rounds thru this set up
All job done.by Dave DMR Rifle https://dmr-llc.com/?p=1726
Also have Tikka original trigger

I have 2 Scalarworks lower-third 1.57 high
Gen 1 $80 shipped
Gen 2 $110 shipped

MDT ESS 700 SA, RH, FDE chassis. Fully adjustable FOLDING butt stock with 18" full pic rail forend.
Additions include the following MDT accessories. Foregrip ARCA adapter, Steel Bag Rider, Butt Stock Dampeners and Elite Cheek Riser.
Condition is like new with no scratches or dings on the chassis.

$1000 $1100 $1250 shipped. PayPal FF/Gift or add the fees.

Used 6mm Area 419 Hellfire brake with adapter. SOLD

Leupold mark 5 pr2 5-25
Spuhr mount, DI speed turret, factory turret
Sunshade and bubble level included

Pm me and we can speak or FaceTime if you would like
$2000 plus shipping or ftf if local


References upon request

I shot some SIG Elite Hunter 130 grain tipped ammo in my SP10. This factory ammo has nickel plated cases. It shot real well and feeds well. Is there any downside to running nickel plated cases through an AR?

Barely used Impact 223 bolt assembly, 90 degree throw with 2 polymer MDT 223 magazines(used) and one MDT metal magazine, literally took it out of the pack and shot one mag full through it. SOLD

Selling a like new Burris Signature HD 3.5-15x44 illuminated MOA scope with Ballistic E3 reticle. This scope has been to the range a few times but has no wear marks whatsoever.

Turrets lock with a zero stop, excellent glass for the price point.

Asking $425 shipped (CONUS)

Please reply to the thread and I’ll message you.

Bought a half-dozen of these back when EuroOptic got their “big dump” of 29A COTI’s 3-ish years ago.

This is my last one.

Checked for power-on and function when they arrived, then tucked away ever since. I’ve been 100% thermal or fusion, so no need for this anymore.

I’ll dig it out and take photos later today, but it’s the full original factory kit with everything.

$2,350 cash / net shipped.

$3,000 +/- trade value.

Shoot me your cash/trade/mixed offers.

Western NC, TN and many other places have been thrown back to the stone age from this storm. The Chimney Rock / Lake Lure area has been pretty much wiped out. (My wife and I really love that area) Parts of I-40 and I-26 have been washed away. Some of the areas that have been impacted will never recover.

Haven't heard a peep from Biden or Harris they are probably too busy putting together another package for Ukraine and Israel.

It's a fucking shame when disasters happen anywhere else our politicians are ready to send billions of US dollars the next day, but shit happens here they have to pass a relief package and vote on it!

Looking to part ways with my last MOA scope switched everything over to MIL. Leupold Mark5 3.6-18 pr1 MOA. Would like to trade for the same scope in MIL or would also like a nx8 with mil-c reticle. Will consider other reasonable options as well.

Selling because I was gonna get into PRS, but never did. Now rimfire matches are a lot closer and more plentiful.
Bought in at the end of 2020 when they first came out. Total of 14 round through this gun to zero the scope. It has not been shot since.
**Scope not included.***

Specs:
DST/Defiance Machine Tenacity Action
Hart Rifle Barrels- DST IMPROVED Contour Barrel 26"
DST MTU Improved is 1.250 at the shank for 7 inches then it tapers to .950 at 26 inches.
MDT - ACC Chassis
TriggerTech Special

$2800 shipped to FFL.
Trades CZ457

I recently purchased a rpr 65prc. The barrel thread is 1/2x28.

Question 1: Is the Nomad 30L a good choice for 6.5prc?
Question2: The Nomad L has a direct thread of 5/8x24. For direct thread, is the only missing piece a 1/2x28 to 5/8x24 adapter like the one in this link?

New in box only taken out to inspect. Title and pictures tell it all. $800

Carried very little if ever so the holsters are in great condition. All prices are shipped, conus only.

Kramer leather owb $100
Vedder iwb $60

Pm any questions

Hey all,

First time poster. I'm hoping to get some outside thoughts.

I have a Remington 700 chambered in .308 winchester with a 1:12 twist. This rifle is a shooter with Hornady Amax 165 or BTHP 168. Holes touching at 100 yards. When California moved to 100% Lead Free for all hunting I tried out about 8 different loads from 150gr (lowest I could find) to 168gr. I tried Winchester, Hornady, Barnes, Buffalo Bore, etc. The best grouping I could achieve with the copper was about 1.5-2". I believe this was directly correlated to the slow twist rate of the barrel and the longer coper bullet. Needless to say, it has shaken my shooting confidence and I do not feel comfortable hunting the current setup as long as Lead-free is required.

I love the .308 round from both a practical and nostalgic viewpoint. My hunting ranges are typically 200-400 yards but also like to do some target shooting in the sub 1000 yard range. I primarily hunt pigs but getting into Mule Deer hopefully soon.

I have been doing a lot of research and I also am impressed with the 6.5 PRC but not sure there's enough of a practical difference for me to purchase a new rifle outright. I'm not totally convinced there's a downside to the 6.5 PRC within 400 yards based on bullet weight alone and the longer range stability looks promising. I am not really concerned with barrel life. I'm also not totally convinced I need the better ballistics of the 6.5 PRC based on my use case.

These are the options I am considering:

Option 1
Rebarrel with .308 Hart Barrel - Light Varmint Contour with 1:10 twist)
Debating between 18" and 20" still
Straight Flutes
Cerakote Action and Barrel
Treaded with a VG6 Gamma
Drop it into a KRG Bravo Chassis
Total in, I'll be around $2,000ish (effectively the same as options 2 or 3)

Pros: Check's all the boxes I'm looking to check
Cons: 11 MONTH wait time for Hart Re-barreling, still have 1 rifle

Option 2
Seekins Precision just released the details on Havak PH3 which has a 20" barrel on short actions and it ticks all the boxes.

Purchase Havak PH3 in .308 with 20" barrel and supplement with 6.5 PRC bolt face and barrel later using it as a switch barrel rifle. I'm not sure the 1:11.25 twist will be great for copper though. Sell my current .308 or re-barrel it in another caliber later.

Pros: Ticks all the boxes and possibly recoup some money from the sale of my current Remington 700. Really like the action and look of the PH3. Stock fits me really well.
Cons: Hassle of selling my current .308. Not sure if I want to go the barrel swapping route. Nostalgia makes me want to keep my first bolt action.
Concern: Only a 1:11.25 twist. Not sure how this will work with Copper.

Option 3
Purchase Havak PH3 in 6.5 PRC and re-barrel my existing .308 later.

Pros: I would have 2 rifles. 2 calibers.
Cons: Would not be able to hunt with the .308 until/if I re-barrel later.
Concern: If I go this route, would I be better off going long action 7 PRC instead of having a .308 and 6.5 PRC both?


What would you guys do? What am I not considering?

I am really considering purchasing one in the near unforseen future. Can those w/ one give me their insights on the rifle, pro's and con's besides the obvious such as price and weight? Pics would be nice too. Thanks.

Lightly used (300ish rounds) T3x stainless action. This will come complete with .473 bolt, trigger, SA bolt stop, factory plastic DBM, factory 308 magazine, action screws, and area 419 scope base (20 moa).

$650 shipped

$750 with mtn tactical bottom metal

I've got a NIB Aero Solus Comp chassis with 17" forend in black
Asking SOLD
PM if interested
Thanks

Who here has stopped eating ass? Why? Was it because of the possibility of getting pink eye?

What did you do that helped you quit?

Hi guys,

Ive recently purchased a czech vz. 54 sniper rifle and when I ran my new borescope thru the barrel Ive noticed the whole bore length is covered in something.

My guess its actually pitting but it may be deposit of some sort of material (dirty bore).

Im attaching a video here:

Login to view embedded media
Thanks!