I have been getting double charged for my membership for months. Who do I need to speak with about this issue?

Login to view embedded media
Police will show up and beat the fuck outta arrest you and destroy your vehicle.

Notice that neither of these guys has a criminal record or face tattoos so they figured they were safe to do whatever .

I've been mostly lurking for a good while without introducing myself here. I've avoided it because I hate talking about myself. That's not because I don't love me more than all but Jesus Christ the Almighty and my mom, but because it is hard for me to convey a representation of who I am without a huge amount of self-serving bias. But I will try not to over complicate things, as I tend to do, and remind myself that in truth nobody really cares who I 'really' am, with me being the only likely exception. So I'll keep it simple and just state the basic demographic facts and a bit about shooting.

I am an aging single Norwegian bachelor non-farmer male who lives part time in Saint Louis, Missouri and part time near Springfield, Missouri. I've been into guns ever since I was a youngster and started reloading when I was 13. I later strayed from these wholesome pursuits for the thrill of debauchery, only to pick them up again after growing up. Now I am in my late 40s and exhibit more extreme signs of firearm related OCD. When I was a lad I would use various forms of hunting to justify collecting an array of firearms (I had my "Deer Rifle" and my "Turkey Gun" and my "Squirrel Rifle" and my "Varmint Rifle" and my "Pig Kalashnikov" and my "Bear Revolver" and on and on but now I just like guns and don't care about justifications. I especially enjoy all things rifle related, both rimfire and centerfire. I actually have a smaller collection of guns but shoot each individual gun much much more. I still like to kill shit here and there, but my murder power needs no regular outlet as I almost exclusively enjoy shooting at small targets far away. I also like to figure out solutions to problems or challenges in shooting by designing and creating things myself rather than spending money on stuff. If I had more money I would probably be more gadget-oriented but I believe I have more fun operating within the challenges posed by financial constraint. I definitely learn more. I work in the field of zoological waste management but would love to someday live off making and selling things I have come up with to solve problems and address needs that arise in long range recreational and competitive precision rifle shooting.

And my name is Ryan, but I always thought it would be super neato to have a nickname or a "street name" like Tiny or Murder D or Jazzy Jeff and the Fresh Prince of Bel-Air or something really tough like that but people just call me Ryan, which is my name on my license and birth-certificate and other documents. Sniper's Hide members have cool nicknames or handles or whatever so I called myself "Grassassin" in my profile because I once ran a lawn care service called Grassassins, but nobody ever called me Dr. Grassassin, PhD or anything like that. People just call me Ryan, which is my name.

Okay.

Used but like new. $350 Shipped and insured.

Comes with the Spuhr Side Clamp warranty replacement parts which are steel and replace the original clamp that had a tendency to crack on this model and others. PM if you need pics.

So I just got my first tripod and I'm starting to think about putting a spotting scope system together. I've seen a few systems that have LRF/atmospheric and NVG / illuminator together. Would love to see what you guys are running for that (bonus points if it works at night)!

Any discussion around use case for this type of stuff would be great too as I'm just starting down this rabbit hole. I've generally spotted for buddies while on my own rifle but want to learn more as I get into the 1,000+ range (starting a 300 NM build soon).

If I've missed a thread where spotter setups are shown please point me in the right direction. Otherwise, here's a pic to get things started (pulled from another thread, sorry don't remember who to credit)

Area 419 Master Funnel Kit​

Excellent condition

$90 shipped PayPal F&F preferred

New and never mounted, Trijicon 400369. Includes the Q-Loc quick detach mount. $925 shipped fully insured. Zelle, personal check, certified check, or a Postal MO work fine. Thank you

Looking to add a full length Arca rail in place of my pic rail on my McMillan a3-5 to mount to a tripod, bipod, etc. I was leaning towards area 419 and I could fit a 10” before the little kick down to the bottom metal. I saw they make a spacer for a manners t6 that has a similar size bump based off pictures, If that fit and I used the action screw I could fit a 12”. Anyone know if that spacer would fit or could be easily modified to fit? Would using the action screw to mount the back of the Arca rail effect accuracy when clamping in and out and banging off of barricades? Should I say screw it and just mount the 10” on the flat part?

Willing to buy inverted tripod for PRS

mainly interested in two vets v2 inverted

Also interested in RRS 22i
Or the fat boy inverted.

I have a RRS tfc 24L id trade without the ball head

Bought this and never got around to actually using it.
Whidden click adjustable for lock ring
$45 shipped
Thanks for looking
Cross listed

Parting out my JP LRP-07/LRI-20 side charge

• JP LRP-07/LRI-20 side charge complete chassis with 17.5" handguard excellent condition, no scratches or cosmetic defaults (includes barrel nut and tool. ~600 rounds)-$1,250 shipped Sold
• JP full-length 15” ARCA rail-$50 shipped
• Craddock built Bartlein 22" 5R barrel 6.5 Creed and gas tube (430 rounds)-$600 shipped
• JP Full Mass BCG with HP bolt (200 rounds)-$275 shipped Sold
• Magpul PRS Gen 3 (black) with A5 tube (like new)-$175 shipped
• V Seven heavy steel mill spec buffer tube-$50 shipped
• MDT Elite grip-$50 shipped

Terminus Zeus Short Action QC with 18” M24 contour 1:10” twist 308 barrel by Deep South Tactical.

Most places are Backordered on these QC actions.

PayPal Accepted

Package $SOLD

Since 2006 when I returned Stateside from my first deployment I have been working with Compass Lake Engineering building some of the finest Barrels that I've ever had the privileged to own.

For the first few years I mostly dealt directly with Frank White, once I started ordering more one off specialty barrels Frank put me in touch with his head Barrel Smith Paul Ross.

For the first five years Paul cut his teeth under the instruction of Frank White and fast became the Head Barrel Smith behind the scene of CLE, which resulted in a well served 20-year Tenure with CLE.

CLE has since closed thier doors but Paul Ross continues to strive for perfection with his new Company ROSS PRECISION MACHINE.
Paul offers a Multitude of separate services other than Gas Gun Barrels under his new Company, He has since branched out to Custom Bolt Gun Services as well and to no surprise his quality of work always supersedes his customers expectations.

Below you'll see a multitude of Small and Large Frame Gas Rifles Photos, this is a very, very short list of Custom Barrels that Paul has turned for me producing True Sub Half MOA Gas Guns.

MK12 Hybrid Bartlein 6.5 Grendel



20" Kreiger .223 SPR



18" Bartlein SPR



16" Kreiger Recce




First Seekins SP10 Custom Build with my 22" Bartlein 6.5CM barrel Design.



Several Custom JP PRS Rifles both Small and Large Frame all with 20"-24" Bartlein Barrel in .223 .308, 6MM and 6.5CM.






Custom Mega Build with 20" Bartlein.



Current Seekins SP10 Build with my 22" Bartlein Barrel Design.



Seekins Small frame .223



And a Countless list stemming back 15 years of LaRue uppers that I've rebelled, all with Paul Ross Custom Barrels.



https://www.snipershide.com/shootin...larues-large-frame-review-part-1-obr.7213077/

https://www.snipershide.com/shootin...s-large-frame-review-part-2-fde-ptar.7213151/

https://www.snipershide.com/shootin...ch-barrel-predatobr-complete-05may24.7213287/

There have been countless Snipershide Members that I have either personally built custom uppers for or have put them in contact with Paul Ross who has used the same successfully designs that Paul and I have Achieved over the years and have all been extremely satisfied with the quality of his services, if you're one of those members please feel free to post your stories in here.

Every Barrel that I've designed or ordered from Paul has been 1/2 MOA or less, but when working with Paul it's much more than just receiving a quality product, his Custom Service is second to none and he never shies away from a challenge.

[email protected]

Paul Ross Shop Phone
1-850-928-4300

Jake.

So the piece of shit that beat an old man with dementia in Walmart recently- and filed false charges against him - also beat the shit out of an even older man with dementia in 2021.

What a fucking cunt

I have the opportunity today to pick up a brand new in box MARK 5HD 5-25 PR-1 MOA scope with illumination for $1679.

Am I absolutely stupid to not take that deal?

Always wanted a Razor 3 but this seems to good to pass up.

NIB never mounted
5-25 Tremor 3 FDE

$1700 1600 shipped

No trades.

PM/DM, I will NOT message you until you message me first to avoid scammers.

Thank you

Login to view embedded media
That police found and beat the fuck out of and filed false charges including assault and cocaine use on him.

Cause why wouldn’t they beat the fuck out of a lost old man with dementia? Who happened to be a decorated combat veteran

I bet 20 or so years ago that pig wouldn’t have dreamed of going hands on with him- not alone anyhow .

But old black disabled cold and confused- it triggered all the pirates murder ape impulses.

Sig pdw grip from a LT rattler $22 no screw SOLD

Metal A3 tactical hk style grip with extra nut and screw ( you must have one of their bases to install ) $23

Prices are shipped .

Choose Mag Carrier Type Soft Shell Scorpion Pistol Mag Carrier Tall

Choose SS Pistol Mount P1, P2 and P3 Clips

Choose SoftShell Rifle Mounting Option R1, R2 and R3 Clips
Choose SoftShell Color Black Shell with Green Frame


New . Just been sitting . Shipping is $8 usps ( slow ) or ups ground $13 ( not slow )

Aquired this from a guy that was wanting to install it on a Curtis axiom action....should have seen the look on his face...still in box all pretty like....like to get 600 plus shipping if possible

Selling a few things today. Will upload pics later today. PayPal FF, no notes. No trades right now.

Login to view embedded media
LMT MRGG-S 6.5CM 20" Barrel NEW SOLD

OEM Glock 17 Gen 3 Stripped slide with ACRO optic cut and top/side serrations done by Wager Machine Works. Comes with suppressor height iron sights. Have a used OEM barrel that I can throw in for another $50 bucks. $300 Shipped

B5 Precision Stock Medium FDE SOLD

Badger Ordnance 1.54" 0 MOA 34MM mount with ARC and diving board. Custom cerakoted in LMT FDE. SOLD

New in package KAC M-LOK index stops. KAC p/n 113886
$SOLD each shipped

Recently re-acquired this rifle back after selling to my buddy as a back up for his Gen 1. Likely has less than 3k rounds since I didn’t shoot it a whole lot, and neither did he. 20” MTU Ace barrel threaded 1/2x28 with thread protector, 90° action, will come with a Bix n Andy Tacsport single stage trigger.

Foundation Centurion purchased from a user here. Fits both Rim X and Vudoo as confirmed by Foundation. It is the light fill. Has some silicone residue in the holes in the forend as the previous owner had weights in them. Hawkins M5 DBM with the long latch installed for feeding. Full length aluminum arca rail. 12rd aluminum magazine.

Prefer to sell as package but if I have a buyer for the barreled action and the stock, will part out that way too.

Whole rifle minus optic rings and suppressor: 2400 shipped

Barreled action with magazine and trigger: 1500 shipped

Foundation with bottom metal and arca rail: 950 shipped.


If you are interested in the whole rifle with the K318i, I can cut a deal on that too.

Open to offers.

I have 2 of these available.

These rails were made by CMT and are discontinued.
Battle Arms Development
13.7 inch Rigidrail
Aluminum Barrel Nut
9 oz weight

Lightly used. Tested a barrel for one afternoon. Only marks are from an MLOK bipod. Includes barrel nut wrench.


$130 shipped
Discreet PP or Venmo

This is an original Caswell CK3 from Caswell Knives. Probably one of the coolest looking knives ever made. The blade is flat black DLC (looks shiny in photos because I keep a light coat of food safe oil on it).











The grip insanely good. Between the shape and the G10 stippling, it sticks to the hand perfectly. Blade is made from a top-tier CPM-3V at 0.189" thick. This and the original run of the morphing karambit are highly sought after knives made and produced by Joe Caswell.

The Kydex sheath is the original factory sheath that's made for concealed carry inside of the waistband / IWB. These knives were designed and produced for FBI field agents, but they evidently couldn't produce them fast enough for them. Knife Center has a good write up on that along with the full specs of the knife here:

Terms:
- Serious inquiries only. Not interested in trades
- $650 shipped CONUS