What is your opinion of CCI pistol match? I’m using a Ruger charger 22 with a 10 inch barrel. it’s expensive but it seems to shoot so more consistent than anything else I’ve tried. Anything cheaper and comparable in accuracy and reliability? Thanks for any input.

Looking to sell my burn proof gear heavy suppressor cover for a silencer co omega 300 with keymo adapter.

Total length is 7.5”
Diameter 1.5”

Looking for $70 shipped payment via paypal f&f or zelle

Sold!

Brand new in the box. It’s been sitting in my gun room since I got it. Ship to your ffl. This is the nrl version with the trigger tech diamond, mlock mount etc. 6.5 creed. $2200 shipped

Comes with everything. $525 shipped. They have a little wear on the body but function is perfect. Reticle in the left eye. Glass is great.
Mark from the bino cinch on the right housing.

Warne skyline lite with arca attachment... great condition!!! Sold!!!!

Magpul bipod with m -lok attachment
Great condition!! $75 shipped

Atlas super cal with picatinny mount
Comes with both rubber feet and sled feet. Also in great condition!!!
$250 shipped

PayPal F&F

Will add pics later on ...

I have one of the new German spec EOTECH CLIP-NV’s for sale. Arrived from EOTECH earlier this month. This is a new unit with the new German spec tubes. I performed due diligence on this unit this past weekend to confirm the image quality was excellent and that the POI shift was within spec. Less than 10 rounds through the unit.

Image through the unit at 100YDS (no IR illumination - ambient night sky):



POI shift testing. Red is 3 rounds fired with the day optic prior to dusk. Blue is 3 rounds through the CLIPNV after dark:



.1 mil UP and .1 mil to .2 mil right is the offset. Well within 1MOA spec.

Unit weighs less than 2lbs:



Unit feels solid in the hand like an anvil, not dainty like a CNVD-LR, and is significantly shorter than its main competitor (borrowed comparison pic below):



EOTECH states the unit will take 12X magnification but I shot the POI shift group at 15X without any issues.

Additional pictures below of the unit:







I’ve had several of these units with the Elbit tubes. The German tubes are just as bright and the image quality is excellent. Theon acquired German tube manufacturer Harder Digital during the tail end of 2024 in order to better control tube quality.

This unit has the best POI shift (smallest) of the units I’ve shot.

Unit comes with the EOTECH 10YR warranty.

Any issues they either fix it or replace the unit.

Peace of mind is priceless.

Perfect size for SPR’s or short bolt guns:



$7,500 Shipped. Retail is $10K. Can’t lose at that price. Especially with a 10YR warranty.

Gotcha Ya!! Same old Barrett MRAD, Just a new thread for Discussion/Photos? Add your $.02 if your an actual owner or if you have shot one in the past.

Proceed forth!!!!

As The German says, "I bought an MRAD, I no longer care(about any other rifle)"!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I'll start with Mine "Dark Chocolate", 20" Heavy barrel 1/10 twist in 300 WIN. MAG. Vortex RAZOR Gen.2 4.5-27x56 ERB-2C MOA. Spuhr 4602. Atlas Prs?

IanHusaberg out

I have a Manners LRH stock for sale. Took this in on trade today and I have no use for it.

Manners LRH
Carbon fiber finish (no paint)
Remington 700 s/a or clone
M5 inlet
Sendero barrel channel
Badger Bipod Rail
ARCA Rail
Flush cups on l-side
1” pad

Comes with Manners Pillars so yes, it will need bedding.

$700.00 shipped

USPS money order or Venmo only.

Looking for the 16" forend for an accuracy international aics ax chassis. Preferably in peanut butter but not picky.

Like new Vortex Viper PST Gen 2 5-25x50 FFP MOA rifle scope with illumination in EBR-2C MOA Reticle. Comes with everything mounted on the scope as well. Will trade for the right Leupold or Vortex LHT. Can add cash as well.
$650 buys it

FDE AXSR block rail and RH firing pin assembly.

Package deal only $1k

Thanks

I bought in to the Applied Ballistic's desktop program October 21st, 2020. I had initially purchased a cheap windows computer to run the software on. . . like most things I got what I paid for and the computer would not run / install programs in short order. We'll call this "license #1"

I then had an iPad Pro for a period of time. "License #2"

I "upgraded" to a MacBook Pro February 28th, 2023. . . "License #3"

The MacBook Pro screen went out on me earlier this year. Had to log in remotely and "sign out". This deleted all my apps etc. Got my Mac back with the screen fixed and @DocUSMCRetired is saying my computer is reporting a "new serial number".

I cannot be the only one experiencing trying to reinstall the Applied Ballistics Program on a computer they've had it on but needed to do a reboot on. I'm beyond pissed because at this point I'm being asked to purchase a new license.

WTF! ! ! I don't care what the software is "supposed to do" I'm on the user end saying it's not a new computer and the software is getting it wrong. I'd like to hear from you about the same to say this isn't as "isolated" as its being spun off.

I'll go to my damn grave and die on this hill that my integrity is above this software issue.

1 brand new in the sealed box
$1750 shipped conus -sold
Arc rings sold

1 used in good shape, body is clean ,glass 100 % , couple little rubs in magnification ring(see pic) new scope caps, Includes original elevation turret and the competition speed turret, Turret
Sold

No trades

Not trying to steal any thunder from ARFCOM, but I can't hardly stand to get on there anymore. Figured there may some interest in a MK12 picture and discussion thread on here. I'll start:

Lower: Nodak Spud M16A1 'black' lower, Geissele SSA-E trigger, Colt A-1 grip and stock (trapdoor), Fulton Armory A1 extension with buffer and spring, Colt no-tic safety selector, no name milspec LPK

Upper: Colt AF forged M4 feedramp upper, tear drop FA, PRI Gasbuster charging handle with .mil big latch. Colt BCG. A.R.M.S. #40 rear with bonus point wingless swan logo, A.R.M.S. #38 SPR-PEQ 2-3 rail, Douglas barrel 1:7 twist, PRI milled flat flip up gas block, Colt gas tube, A.R.M.S. #22 M rings, Leupold MK 4 2.5-8 M/RT with M2 dials. Actual old stock Ops brake and collar. Allen Engineering AEM5. KAC bipod adapter with Harris BRMS and pod loc. KAC sling mount with Uncle Mikes sling stud. Oh and a A.R.M.S. TRC ring cap and rail.

This is my best effort at a late gen Mod 0. Big upgrades would be a Colt M16A1 lower (my birthday is coming up if anyone is feeling generous) and the original OPS 12th can.

I have a bighorn origin tied to a 6gt Proof barrel in an mdt acc chassis. Comes with mpa 4 port brake, one accurate-mag, buttstock weight,and two foreend weights. Has around 220 rounds. Shoots 3/8 groups all day on my loads and around 1/2 on every other load I tested. Have 100 gay tiger alpha brass new in box, 116 once fired and 70 loaded with 105 berger hybrids that could be negotiated as well. Have rcbs matchmaster dies as well. 5408310294. Text or message. $2300

AR15 22” 224 Valkyrie barrel with matching bolt, 6.5 twist. With 66 new Hornady brand brass (were neck sized and tumbled), rifle length gas system. 34 rounds down the barrel. Accurate (<1” @ 100 yards) with handloads. I don’t have target pictures.

No dies.

$225 delivered.

Hey everyone,

I'm a relatively new precision shooter out of NW Montana. I let some questionable friends influence me into getting into shooting precision rifle with a wildcat this year, so I've also jumped headfirst into wildcatting (22 BRA). So I've spent an undiscloseable amount of time and money on it, but it's been awesome! I'll be wrapping up my first full season here in a week or so with the WPR.

I have a Tikka 595 in 223 Remington, my current barrel is a 1:12 Hart using 52-53 grain flat base Berger or Sierra bullets.

I shoot a club match each week requiring 50 rounds, generally I would use RE-15 or N203B and get excellent accuracy.

To speed things up in the loading area, I tried a couple ball powders that I could dump load with a Harrell’s powder measure, W748 and H335. They both meter fine, but my SD’s and ES’s are huge, SD’s 30+ and ES 115+. Accuracy is just aok, but inconsistent. Sometimes I can clean a target, other times it looks like a gathering not a group. I’ve been through different bullets, seating depth changes, primers, powder weight changes and nothing seems to work. I should say I need better than 1/2 MOA in this game, if woodchucks were the quarry, these loads would be fine.

Before I go back to stick powders, are there any Ball powders or one that meters easily that rival accuracy of stick powders?

Thanks for any insight.

FDE 34mm A696 mount. $250 shipped

Hi

I've just taked off factory barrel and noticed marks of front lugs surfaces on breech face. Same picture Ive seen on another Rem700 with custom made ss barrel with proper space between. Why it happened even with proper measurments and gunsmithing ? Need more than 0.010 clearance between bolt lugs and breech face ? Or its OK and just barrel/bolt/action flexing under recoil ?

Best,

Anyone have a recommendation for a 6pac charter boat out of Kona? Looking to go with a couple kids and wife. We don't want to go for blue fin or big game. Just looking for yellow fin, mahi, ono to be able to bring some home at the end of the day.

It's been a long time since I went fishing over there and only have on private boats never a charter.

We just got a limited amount of the Silencer Co Scythe Ti Lightweight Titanium .30 Cal Suppressors in stock!

If you are interested in this can, PM me!

Not much info. Causalities are being reported.

title says it. Not looking for trades. Will come with 6 mags. Some Staccato and some Springfield, I will get them out for a count of each. Comes with C&H Precision optic plate, 3.25 moa RMR HD and Black Scorpion comp holster. I will update with holster and mag pictures once I dig them out of the closet. Has 500 rounds of 124 Blazer through it, which shot fantastic .$2000 shipped

New never used

part number W080ML
$old shipped
Zelle or Venmo