Great condition, only lightly used. $180 shipped

Bought this for a varmint rifle build, but not going to use it. Brand new in box.
There is an error on the order specs, length of pull is 13.5”

$900 shipped.

Looking to sell one of my trainers. Low rd count. Less than 150. Will give exact count to interested parties. Will trade for a STI/ DVC 2011 in 9mm with dragon scale grip

~Defiance Machine Tenacity
~Proof Research 26” comp contour 1:7 chambered in .223
~MPA Comp BA in gun Kandy purple
~Vortex Strike Eagle MRAD FFP 5-25x50
~MPA 34mm one piece mount w/ diving board
~AAC 51T brake (with or without)
~Triggertech Special single stage
~MDT 223 mag x3

$3700 shipped. Will sell without the optic also. Knock $500 off for that.

Does not include bipod.

Will throw in ammo I have for it if you’re local (Columbus, GA) but not shipping it. I’m shooting 77gr SMK through it.

Selling my Schmidt Bender 3-20x50mm PM II Ultra Short LP GR2ID DT II+ MTC LT / ST II ZC LT 667-911-422-M2-I5. Included is a Geissele mount and S&B shark fin throw lever.

It has around 250 rounds on it.

$4,300 shipped

Login to view embedded media
Login to view embedded media
Login to view embedded media
If real, this sure looks like roid rage, just saying…

Or perhaps just thuggz inna hood inna uniform

For sale: Dan Wesson DWX fullsize, 9mm. Nearly new, 150 rounds fired. LOK thin checkered CZ75 grips, Dan Wesson short black trigger installed, medium included unopened, factory in box, 4-19rd factory mags with black factory base plates, left side factory safety installed factory ambi included. All original red anodized parts are in the original box, if buyer prefers those I will swap everything to stock. My personal opinion it blows 2011 pistols away, especially in ergonomics. All internal fire controls are EGW 1911 components.Absolutely amazing pistols, I just don't shoot it and could invest in other projects. $2000 shipped.

I’ve seen Lyman’s load data listing Hodgdon H335 powder primarily for 123-grain bullets in the 7.62×39mm cartridge. However, I’m sitting on plenty of H335 and have some Hornady 150-grain soft points I’d like to use.

I am thinking of trying 27 grain. But I have set everything up for a large batch run would be good to get any inputs.

Normally, I run 23 grains of CFE BLK with these heavier bullets, but I’m curious if anyone here has experience or data running H335 with a 150-gr bullet? I’m especially interested in real-world results, pressure signs, velocities, or any tips.





Appreciate any insights!

Hornady .224 90gr ATIPs still packed in original boxes.

3200ea from one lot, 400ea from another.

$2500 shipped ($0.69 ea vs $0.73 ea plus shipping)

Login to view embedded media
This might be a bit controversial but he makes some good points. You need to look at both precision (mean radius/ES) and accuracy (API). To give some context his load development process he does use group size but its not the main focus.

He starts with testing 2-3 different powders with his desired bullet for the use case. For 308 he will use gordons reloading tool to find the charge weights for 50K to 62K and go in .2gr increments and load one shot at each increment. He will do this process for each powder then shoot 10-15 round groups (a single POA for each powder). The point of this is to see how temp/pressure sensitive each powder is.

Here he tested 3 powders:


He Id’d powder C as the best (look for group size < 2”) then repeated the same charges for powder C as step 1 but 3 shot groups for each increment instead 1.

The red numbers represent different temps. Look for 4-5 charge weights in a row that have similar API and low vertical stringing and the target in the middle will be your charge (see stars)


Here’s a nice AI summary of differences between mean radius and API:

Excellent condition Hawkins Heavy Tactical Rings 34MM 1.15

SOLD $160 CONUS. I can take a card or Venmo/PayPal discrete. Thank you.

Also, please don't comment on my post (scammers will message you). Just send me a PM. I will go off timestamps. If you would like to talk over the phone to verify or FaceTime, no problem!

For sale is a slightly used Nightforce NXS 5.5x22x56. Ultralight rings are included. NP-R1 reticle. $1100.

Thinking about spinning up a 7mm prc barrel for long range target shooting in the 22-26 inch range. Will at least start by using factory ammo in the 170-180 grain range. PVA is out of 1 in 8 barrels currently and I am wondering is a 1 in 7 would be too fast. According to the berger calculator it is good to go, but some other calculators say it will be over-stabalized. Of course, I don't think Bryan Litz believes in over-stabalization, so who am I to question it?

That said, what do you all think?

This started as an idea and is now a reality! I started a thread on AccurateShooter Forum to gauge interest in gathering a group together to purchase custom cut case foam for the SEB Neo-X. Needless to say, there is massive interest and I put together a list of 30 people interested in getting in on something. I met with the designer today and approved the prototype the order is officially placed.

This post is for custom cut, heavy duty, closed-cell case foam designed to perfectly fit the SEB Neo-X. This stuff is firm, holds upto 50lbs, is self healing and resistant to oil. I had this designed to be a direct replacement to the bottom half of an Apache Model #4800 found at your local Harbor Freight.

This post is for the remaining 30 units that will be available to ship in 3-4 weeks when production is finished.

Price is $130.00 Shipped & Insured

Who wants one? Reply to this thread and send me a PM

(Fyi... Thread is cross posted on AccurateShooter, LongRangeHunting and Rokslide Forums as well.)

NOS RARE MK12 GWOT ARMS 22h NO LEVER STOP FACTORY SEALED. First picture is an example of what you get. These are a rare find $400

Hello all,

Just wanted to drop an introduction thread here before posting. I am a young engineer who has worked in the defense space for the last seven years. While I am an avid firearms enthusiast, I also do a lot of CAD, programming, and EE work. If you ever want to talk about larger EO/IR packages, feel free to drop me a message.

I have a new Dan Wesson DWX compact with light rail. Replaced trigger with a factory replacement, just in silver. Has Vytal color case grips. And a Trijicon RMR RM06 (can come without) with the RMR plate from Dan Wesson

Comes with the factory red trigger and black aluminum grips.

It has never been fired. Has one slight mark on front of trigger well that you can see in pictures. SRO pictured is not available


May trade for a CZ SP01/ Shadow Carry or other optics ready CZ’s only. Must be compatible with RMR/SRO footprint and in same condition. With appropriate cash

Or an original/ older STI 2011 with dragon scale grip.

DM me if you want to buy it and want a cash price. Prefer to trade though.

Located in Columbus, GA. Local is cool

Has anyone with the Savage Impulse upgraded their trigger yet? If so, what brand? Has anyone tried the JARD trigger for the Impulse? If so, how did it work for you?

Happy Dads Day to all the Dads up in here !
Hope everyone has a great day . It takes a lot to be a good Pops these days.
Hope everyone’s kids don’t forget any of us.
Told my dear daughter I was looking for a nice , modern trailer to camp in , she never forgets to listen to my hints.

Hi all

Curious to hear what people have seen, Whats the better primer with the above 2 powders in a 300PRC, at approx 77-78gr
which primer between CCI250 and Federal Large Rifle Magnum Primers / 215

G

One of the few great races left...

Just in case anyone else watnst to watch!

Sirhr

Has 50 total rounds down the tube. Was broke in following Lilja’s break in procedure. This barrel is a tack driver.

$465 shipped to lower 48

I just finished my 300 PRC build. I'm using an AICS legacy 2.0 LA chassis for 300wm. The 300 PRC round is too long for the magazine.

I purchased a MDT 300 PRC magazine and it does not fit in the magwell of my chassis.

One option is to have my 300 wm magazine tuned to fit the thickness of the PRC round, but then I will have to load my round shorter.

Another option is to have a machine work done on the Magwell to fit a 300prc mag correctly.

Third option is to try to sell the chassis and buy one appropriate for the round I'm using.

Can I get any feedback from you guys? What would you do in the situation? Would a shorter round change much of my desired outcome for ELD Shooting? I know I would have to back off the powder charge due to a higher pressure increase from a deeper seating depth.

Again, I just finished my build and noticed this today.

Thanks in advance

Login to view embedded media
Login to view embedded media
They can take your cash, just like that.

Fascinating, isn’t it?

Login to view embedded media
The one - liner says it all…

…but you don’t even have to be charged with a crime for them to loot your cash.

I'm going to shoot PRS tactical using 308 with 175gr SMK. (24",1:10,planned to shoot 178ELM but found super good deal of SMK)
I searched online and found most people are running it at around 2600fps instead of 2700.

Is there a particular reason for that? I'm not a fun of less than 95% fill ratio
Are they just trying to replicate MK316 or that spot actually works very well?

Thank you

vs