Looking to Part ways with my current xp50 it's been a great scope 640 resolution with a 1024 display. I recently sent it into Pulsar to have a button replaced during that time, they recalibrated and installed the latest updates the scope will come with rubber eye cup 2 chargers' extra batteries, and I have never used the onboard battery unless I was hunting a tournament (5). I also have An American defense QD mount that can go with it 2750 with the mount 2500 without the mount. Priced to move

Excellent condition STR 65 with MOA reticle and 25-50 wide angle eyepiece. MTM hard case included, $2800 shipped insured.

Cory Trapp
Gunsite Academy, Inc.

SIG 2025 translation: Self inflicted gunshot.

Leupold 1-6 CMR-W 7.62 reticle with Area 419 1 piece mount. Has Tenebraex scope covers as well. Scope was mounted and leveled, but never used or zeroed on a rifle. All of it is brand new.

Reticle can be used on 5.56 if your using 77gr. I have another on a different rifle and reticle is pretty close if not dead on using 75gr and 77gr ammo.


$1300 shipped. PayPal FF, Venmo or Zelle

just put a Mk II on layaway , odd thing is it has a RA/flaming bomb stamp on the barrel , also marked on the barrel 12/35 , rifle checked all the box's which is why i leaped , can someone who is in the know confirm Remington produced barrels for Springfield for their M1922 rifles

i did a search and it came back "YES" they did but none of the references attached to the result actually had anything confirmation of it , thanks in advance

Selling my PRS rifle to help pay for a business that I have started up and need capital. I am listing as a complete package and am listing it also with each part itemized so it can be sold as parts as well if it isnt moving quickly enough. I am discounting the complete package A LOT. The rifle is in IMMACULATE condition and the barrel is Just broke in with 290 rounds only through it.

I have no problem getting on video to discuss rifle and or sending whatever close up pictures to show how clean the rifle is.

PM with any questions and I will get right back to you.

• MDT ACC ELITE CHASSIS $1400
• MDT Weights GEN 2 $140
• Trigger tech DIAMOND trigger $285
• Spuhr Mount $390
• Nightforce ATACR 7-35 x 56 $3200 comes with bell cover
• Defiance Deviant SA with Bartlein Barrel Chambered in 6mm Creedmoor- Total rounds 290 $2200
• Area 419 Hellfire MATCH Muzzle brake $140
• MDT Electronic LEVEL GEN 1 $180
• Trijicon RMR 2 MOA dot with QUICK RELEASE MOUNT $450
• Pelican Case 1750 $250
• MDT Thumb Rest x 2 $35

Total Retail Value is over $11,500

SELLING FOR $8500 FORM OF PAYMENT IS ZELLE


]

Hello Gents,
I have been lurking here for a while. I have an issue so I decided to join. I purchased one of the Euro Optics Schmidt Bender 644-911-972-89-64A68 USMC M8541 optics for a M40A3ish rifle I have been putting together for years. The first one I received the elevation turret was locked up with less than 8 MRAD's of movement so I contacted Euro Optics and sent it back. They said it would have to go back to the manufacturer and they promptly send me another. This 2nd I received is 4 scopes later in the serial number line so they were probably assembled by the same person I suspect. The issue I am having with this 2nd one is that is seems to be locked on the send rotation. I get 10 mils of adjustment with the heavy clunk of the MTC turret with 6 mrads on either side and that is in line with what it should be. I can find very little info on this USMC turret. I am familiar with the optic but not these turrets. I should be able to wind down and have somewhere in the range of 23 mils of adjustment. This is not a locking turret and I tried resetting the zero stop and when done I get the same result. I find it extremely hard to believe that I have received two defective SB optics so I suspect this is user error. Any assistance is appreciated. I know I can contact Euro Optics and return this but at this point I might be better off sending it to Schmidt Bender and having this fix it if the problem is not me.

Gray Ops mini gun plate with brass weights, double arca adaptor, mini plate pad, and brassiere for attaching schmedium bag - $225 firm

Trigger tech diamond flat RH single stage - sold

Sako TRG-42 in 338LM and accessories. I am selling my pre 2013 Sako TRG-42 in .338 Lapua. Rifle comes with:
-Sako factory muzzle brake
-Thunder beast 338BA muzzle brake
-spare barrel
-Sako TRG Bipod
-Spuhr mount (34mm, 13mil, for TRG dovetail)
-KRG folding stock
-Aluminum hard case

Feel free to text me @2535087202 with any questions.

$3250OBO

Trades:

-Currently only interested in higher end optics in the 5-25, 7-35 power range from Schmidt and Bender, ZCO or Tangent Theta….

EP-8 1-8x28 FFP LPVO | Illum. KLBOX | 34mm Tube​

Like new. Never used on a rifle. Had a few in stock and put this in a mount for demo.

Asking $265 includes mount that is cerakoted in graphite black.

Thanks!

ERB-7 MOA reticle. Starting the transition from MOA to MIL, and this is the first one to go. No mechanical issues and glass is like new. Some handling marks from the safe...tried to get them in the pictures the best I could showing overall appearance from all angles.

$1350 shipped insured continental US. Zelle preferred but open to other options.

Let's try again as I didn't realize my supporters status hadn't gone through. I'm trying to find when this rifle was made and a value on it. It's from the Remington Custom Shop and the original case is marked as a 40-XS Rifle Only. It appears to be one of the early Remington 40-XS Tactical System 308 rifles but I can't find anything on value. It's got a McMillan stock and a 24 Inch stainless HB that is factory threaded with a factory muzzle brake. I've been able to find a couple of pictures of this rifle in 338 Lapua but nothing in 308. Any help on positive identification and a value would be appreciated. I apologize for the post earlier and honestly thought my supporter payment had went through. Thanks in advance.

Excellent condition Manners T4A in “GAP molded”

-medium sendero contour

-rem700 Short action/clones

-MCS-DBM Mini Chassis Gen 1

- 2x 5rnd AICS mags

$1075 shipped


M&P 2.0 5” complete slide SOLD

~500 rounds on it

-Calculated Kinetics plate

-Holosun 507 comp green dot

-tungsten guide rod




D.wilson converted Criterion 6.5 Grendel mid length gas barrel for LMT. 100 rounds on it.

$300 shipped


Sawtooth MLOK ARCA, 12.34”

need 7-8 MLOK slots on bottom to work.

$75 shipped


Used AIAX 13” foreend, dark earth.

Includes 20 MOA top rail.

$350 shipped


2x AI 3.15” rails with flush cups

$60 shipped each


5.5” AI accessory rail

$70 shipped


Siege suppressors Plan-B muzzle brake, new

$80 shipped



New Reptilia 34mm acro tall mount

$100 shipped


Badger rmr top mount plate, new,

$35 shipped


KAC MLOK rail

SOLD


KAC rear sight

$115 shipped

Got some extra 6.5 stuff:

Lapua SRP 6.5 Creedmoor Cases, new/unopened - SOLD
Hornady 140gr ELDM, 400ct same lot new/unopened - SOLD
Hornady 135gr A-tips 100ct, new/unopened - $75 shipped
Hornady 123gr ELDM, 100ct new/unopened - $35 shipped

The 140s are 4x100, but they are part of a brick of 500, I only removed and used one box. These four are still sealed and attached to one another, same lot.

DM me if interested in anything, PayPal FF/NN or Venmo, I ship fast and pack well. Thanks.

I am selling a daniel defense dd5 v3 ar10 upper chambered in 308 with bcg and charging handle . It's got the 16 inch barrel and adjustable gas block. I have fired approximately 50 rounds through this upper suppressed with a dead air nomad 30 cal can and it has functioned flawless. I have gotten sub moa groups using sierra match grade ammo. I will include the dead air xeno muzzle break.

Selling my 229 legion. In great condition, round count under 1k. Upgraded to a staccato so don’t use this much anymore. Cash, no trades pp ff, Venmo, Zelle, or cash app accepted. $750

Just got my stock back from @jducos aka the stock doc. I am really impressed he did a great job converting my McMillan game scout to an adjustable comb. He even took the time to not only cut out a notch for bolt throw on the front of the comb, he touched it with paint that matches my camo.

Disregard all the chipping and scraping on the stock. That was all there before. This stock has been all over with me, now I can finally get rid of my stock pack and still maintain my cheek weld.

I would trust him with any of my stocks.

Thanks Joe!

I have a LNIB P226 Legion SA/DA 9mm SRT model with Romeo Pro. 4 MAGS. Will consider a trade for a scope or barreled action/rifle. Thanks

Are any of the factory AI Butt spike models compatible with AT chassis? I've looked around and can't find any info on it.

Hello mates,
Has anyone got experience with the Calypso ultrasonic wind meters?


Keen to hear actual reports on:
- 'Bluetooth 30 meters' is this true, connecting to an iphone.
- Actual measurement resolution for direction & speed measurements?
- Any app connectivity?

There is reference to a new 'MINI AB' on their site however the link is broken... I like the idea of being able to keep this on a small tripod off to the side somewhere 5-10 meters away, and keep an actual eye on this data.... Compared to the Kestrel and actual observations.

They are quite expensive so don't want to throw money at random gear without some good reports.

Thanks,
Jim

Hey Guys! I'm super new on here, but happy to start a discussion. I have the opportunity to buy only one premium rifle platform right now (I can only afford one) and I can't decide between the Geissele Super Duty 16in or the LMT MARS-L 16" MLR MLOK rifle. I am interested in the MRP and the ambi lower for the MARS, and all the features of the Geissele. I already have the optics I would put on it, which include: TA02 with RMR piggyback (soon to be RCR), Geissele Super Precision ACOG Mount, True North Gripstop, Cloud Defensive Rein 3.0 on Arisaka 45 degree mount, Railscales Dragon scales at 9 and 3 o'clock, BCM Mod 3 grip, and Magpul MOE stock. This is a SHTF, mid-range-close-range (out to 500-600, push to 7 yards) rifle. I have heard things about both companies' QC being awful right now, so, so I'm wondering which would be best for my purpose, or if I should just look elsewhere. Excited to hear your guy's insight.

Triggertech Primary for Remington 700 and clones. Flat shoe. I used this on a fun gun that didn't get shot much. I dont have a round count but it works as it should and is in good shape. Box says bolt release but this one is without the bolt release.
$110 shipped conus
Paypal f&f or venmo

Hi folks,

I have an AI AXMC in 338 Lapua I would like to sell

$9,500 shipped.

Items included
AI AXMC
3 magazines
1 300 prc Proof carbon fiber barrel - SOLD

Less than two boxes of 338 on the rifle and the proof barrel never mounted or fired.