How do you note the current zero yardage of your rifle when storing it between range days?
For instance:
If I take my 6.5 hottness and confirm zero @100yds then go to 600 and 100yds banging steel, when the day is should I pull out all the wind and elevation and leave it at 100yds Zero?
Or do you leave it at the 600yd zero or 1000yd zero? (which is my preference but does not account for changing wind)
I normally leave mine zeroed @ 600 elevation and whatever wind hold I had remaining.
But I was thinking that this "stored setting" is also related to the amount of wind on that day shooting 600, and the temperature of that day at 600 and so on...
So technically it would be more accurate to at the end of the day go back to 100yds with Zero elevation and wind (basically take out the environmental conditions that existed at range last time)
When leaving it at 600, on my next range visit I just do a hold under value to confirm yardage at 100 plate (disregard wind), then start shooting at the 600 berm.

So do ya'll just go back to zero each time? or note what yardage(and possibly wind, temp etc..) it is left zeroed for?

Leupold MK5 56mm scope cap set from MKM never opened
$50 shipped

I have a like-new Harrell's Precision Premium Powder Measure and the Harrell's 10 1/2 inch aluminum stand. Two drop tubes and instruction sheet included. This measure is approximately a year old and has been used very little.



Sold!
$300.00 shipped via U.S.P.S. Priority Mail

Looking to trade my 4-16 ATACR F1 MIL-C for a 4-32 NX8 MIL-XT. Scope has been mounted in rings one time, never shot. Still have all factory packaging. Zero scratches or marks.

Scope is ~2 months old

Asking trade plus $300 if both scopes are equal condition.

*will update pic*

Trigger Tech Special Remington 700
Right Handed, Without bolt release
Single Stage
Straight Flat shoe
Brand new in the box
Asking $195 shipped or trade for the exact same in left hand

Good condition first focal plane NXS. 3.5-15x50, MD2 reticle and high speed mil turrets. Zero stop. Glass is in excellent condition.

$1450 shipped, PayPal F&F, Venmo, Zelle, USPS MO. SOLD

Hey guys,

Saw this while looking at LRFs... Just passing along what I saw. I wanted the 3K which came with a free Kestrel 5700, but that's out of stock. They have everything else it seems. Looks like I'll be picking up the 5K Sig instead so I can have a 5700 to sync up to it lol.

That's a pretty good deal.

I don't know why

Kestrel Ballistics Specials

I have 1 and a 1/2 bricks all same lot. $265 shiped.

Decided to change directions on this build. I assembled the components details below

Zermatt Origin action. Triggertech Primary trigger. Barrel is a 16" Proof Chambered by RWS Gunsmithing
Barrel is threaded 5/8x24 for all your common muzzle devices and suppressors for the Grendel. 546 rounds fired. Shoots hornady Black 123gr ELDM at 2392 which is great for this little 16" barrel.

Stock is a Manners LRH with Wiebad cheekpad (Full Length Arca Rail)
*New Hawkins M5 Bottom Metal just put this on

A2 Style Flash hider is on their just protecting the threads.

3x Polymer 224 marked MDT Mags included.

Previous owner shot this with a thermal primarily. He only shot factory ammo mostly hornady black and said it did sub moa.

Price is $2880 shipped and insured FIRM Taking a loss on it as

NO Trades needed

Payment via PayPal F&F with absolutely No Notes Vemo friend option with only the Dollar emoji in the notes or CC +3%

Only dealing with established members due to the number of scammers out here.

Hey guys what is the purpose of this hole? Looks like an attachment for sling but can't find info anywhere.

Selling a 6 Dasher for Impact: Proof Comp contour 7.5 twist, 26'', 5/8x24 threads, cerakoted black.
Round count is 533.
Sold

MDT Crush It Stage Timer w/ M-Lok Pressure Switch and MDT Send It Level LRA MV3 w/ (3) Spare Batteries

Includes the box for both.

Price dropped to $310.00 for BOTH

OR

$210.00 Timer & Pressure Switch

$130.00 Level

Prices are Shipped Insured USPS Priority to your door.

PayPal friends and family with no note (message me shipping information on here)

or add 4% for fee’s and I ship to the address on file with PayPal

Note: looks like MDT is out of stock on the timers till November, here's your chance to pick one up with a level at a discount.

View attachment IMG_5818.jpegView attachment IMG_5819.jpegView attachment IMG_5820.jpegView attachment IMG_5821.jpegView attachment IMG_5823.jpegView attachment IMG_5822.jpeg

I just got a 50 percent off cert for thunderbeast and I am trying to decide which can to get. I have an idea I want to build a 300 PRC so primarily that is what the can would be sitting on in most cases but I also may but it on some other short action cartridges. I want one of the magnus line suppressors. Currently thinking of the magnus rr or the magnus-s rr. What are some pros and cons of each. Weight is not really a factor.

Fired for zero. These are back-ups or spares. Excellent condition.

$1100 shipped - PWS Alpha LT Upper 14.5" 5.56 BLK Complete Upper

Fastest comms via Text or Voice - 2147443589

No Trades plz.

Preston

Thinking ahead to this summer, I want to replace the barrel on my run and gun upper.

Currently she has an odin works 14.5 pencil barrel in 223 wylde. I'd like to stick with the 223 wylde setup.

I'm thinking something along the lines of:

- V7 14.5 inch barrel in regular weight (interested in them after reading about them here)

- Noveske 14.5 afghan ( expensive but excellent)

- proof - carbon or SS (heard many good things)

- criterion (no first hand knowledge)

- Something from Knights? - I'm no KAC fanboy, I don't even know if you can get just a KAC barrel - but they always do excellent in 3rd party testing.

What am I missing? What other barrels should I look at? Accuracy is great, the ability to run hard and be put away wet is also pretty high on the list. I'll be running an adjustable gas block and probably a surefire comp and blast diverter.

I recently picked up a WOA barrel for my 20" AR and love it. I don't see anything shorter than a 16 inch on WOA's website though.

Well this is a good start.

If there was a whistleblower, they should get a nice, big fat check on this one!

Sirhr

As the title states, looking for a Hawkins m5 DBM for a Long Action. Needs to fit a 300WM AICS Mag

Hello, first-time poster here. I'm interested in picking up an AXSR in 300 PRC but have a few questions I was hoping one of you might be able to answer. My plan would be to have a 280 Ackley barrel spun up, and I am trying to figure out what bolt I would need to use. Would the .308 bolt work, or will I run into issues given the LA cartridge? Would that concern be assuaged by proper barrel chambering? Would I need to modify specific magazines? Would it instead require a different bolt face on the 300 PRC bolt? Any input is appreciated - Figured I’d try asking here prior to calling Mile High or Accuracy International.

I'm wanting to install a dimmer on a three pole switch but when I opened the switch cover and pulled the switch, there is not a ground wire attached. This in a multiple switch box.

Any help would be appreciated.

Pics-

Current switch



Edit: added pic of entire box exposed. The green on the other dimmer is connected to a bare ground wire.




New dimmer. Same manufacturer as the current switches.




I'm also wanting to add dimmers to single pole switches but those switches are in similar type box and wired exactly the same as the first pic. I initially installed a single pole dimmer but lost power to some outlets and lights I'm assuming are farther down the line from the single pole switch.

Flavio Fare Whisper 2.1 BenchRest Trigger 0.7oz – 2.8oz​

Never used

$350

By luck or fate or just the power of Thor I have finally acquired a M40A6 chassis….. however…..the top rail was cut and cleaned down and refinished just behind T26. Not sure what the thought process was, but the original owner said something about railflex under certain conditions. Either way, now I need solutions. Do I attempt to find a whole new top rail? If so any ideas on that? Or do I go with a custom fabricated base that matches in height and is the appropriate length to appear monolithic?

Also, not necessarily a clone purist, any thoughts on a good action? I have considered GAP just aren’t sure if they are still doing A6s.

Any help would be appreciated. Thank you.

A mate sent me this video (don't bother watching it is a complete waste of 8mins) that suggests a new MVPO is going to be released soon.
Zero Tech isn't a brand that pops up very often, I believe they are quite popular in Australia though.

The video is terrible and contains no useful information but the fact a 1.5-12 is on the way is interesting.
A lot of their scopes are just Chinesium but I believe they do have some Japanese made scopes, this design kinda looks like some other JOL scopes so who knows could be Japanese.

Login to view embedded media

New in the box, never even removed, GRAY OPS 34mm 1.54 height Precision Scope Mount.

Excellent mount with a full line of accessories available.

$320 shipped UPS, PayPal FF/Gift

Hey all. I was considering getting a YHM R9 to use on my 5" 9mm PCC and 8" 300BO, but after watching a bunch of videos, it seems that everyone is saying that the R45 outperforms the R9 at everything, despite the oversized bore, and it's only an inch longer. I have a bunch of silencers to buy because I'm going to go dedicated on my 5.56 rigs because I shoot those a lot. On the other rigs, swapping cans makes sense.