Selling a brand new Bartlein barrel, 1:9.5 twist ModBB, 38” finished. Barrel is currently sitting at Vestal’s. Spec sheet is attached.

Asking $950 shipped or trade for .338, .375 and .308 similar barrels.

I have one left. unfired KAC sr15 with the older E.3 bolt. this upper is new but did go to retro arms for pin and weld on the muzzle device. Cleanest P/W I've ever seen. $1500 paypal shipped.

I’m looking for a trijicon tenmile 3-18 ffp mil/mil

Login to view embedded media
As many of us know, most AR-10s are overgassed from the factory. The most controllable way to deal with that is an AGB, but not everyone is willing or able to install one. Enter the Bootleg adjustable BCG. They make them for AR-15s too, of course, but this is the DPMS pattern BCG. TLDW; it works well. My BCA-10 is so overgassed without it that it stovepipes, even with a flow through can. In fact, the rifle runs fine without a can and the BCG set to full suppressed.

Letting another spare stock go, Manners Pro Hunter w/mini chassis. You will need an M5 DBM. Inlet for R700 SA, barrel channel is proof Sendero. Color is Altus granite forged camo. Asking $900 shipped. Stock is in great shape, like new. Mounted a barreled action in it and only shot once. Been sitting in the safe since then.

Accept USPS money order or PayPal FF.

WTB: Trijicon Tenmile 3-18 MRAD

Looking to spend $850 -- Send me what you've got.

**I won't PM you first, anyone else doing so is a scammer** If you have issues PMing, comment here first.

Want to trade? I have a P229 Legion (non-OR) that I'll trade + cash to you.

Making a table for the wife lately and Saturday, I did what we are never supposed to do. No gloves on, I was pulling a 6' board through my table saw and I found the blade....

My safety glasses had dust all over them and I just couldn't see the blade that well I guess. my wife was helping catch the boards and watched me do it too and she also said that she didn't think I was that close to it. Yes, I kept working and got all of them ready to join because I'm a man.

Of course this is just one of many accidents. I once caught a metal chuck that came off my lathe with my freaking bear hand (just a reaction to save it from hitting my lathe bed)and had a steel splinter inside my palm for a few days before realizing why it kept hurting so bad. i got it out with a magnet.

Mashed off the end of my left thumb between gears or a flywheel and starter on a log splitter when I was 17, and I've cut myself many times.

So what are the coolest injuries yall have done? Must provide pics or it didn't happen!!!

table and finger for proof

Redding Type S Match 6.5 CM Dies

• Neck Bushing type Full Length Sizing Die
• Includes one neck bushing: please specify the NB diameter you want included
• Micrometer adjustable Seating die: includes VLD seating stem plus typical seating stem

$125.00 shipped CONUS
Zelle or PP/FF

Never really saw much use. Maybe has some slight ring marks, but they are hard to see. The Glass is excellent. No box but comes with sunshade and Vortex Defender caps. Purchased new by me.

$230 Shipped. PPFF preferred.

Like the title say mdt acc in great condition has front internal weights and buttstock weights and dampers. Also has a full length arca and two forend bridges. REM 700 pictured in mac bros evo2
$1250

I built an AR9 some years ago using a quarter circle 10 reciever, barrel, and jp bolt. I couldn’t get my favorite Larue MBT triggers to work so it ended up with a milspec from the spare parts bin.

I have put a few hundred rounds through it and it started to burst fire at the range so I pulled it apart and inspected the trigger but didn’t see any issues. I replaced with another milspec and same thing happened.

I see there are PCC specific triggers, is that because normal AR triggers don’t work? Is there something else I need to look into as to why it keeps burst firing?

I have built a handful of ARs without issue so I don’t believe it’s an assembly problem, but anything is possible.

Check out the dealer we have on these European spotters. Call me to order 504-565-0629

Selling Ruger M77/17 modified by Clark Custom Guns

I purchased this as a complete 17 WSM rifle then sent it to Clark Custom Guns and had it worked over/tuned it up with a custom fluted 21.5" barrel with 1/2-28 threads, tactical bolt knob, extended mag release, and a Boyds stock with an adjustable cheek piece that has been glass bedded. Does include a Weigand picatinny rail adapter (not shown). I will include the remaining 5 of boxes of Winchester 20 grain ammo.

Has a total of 200 rounds down the tube as of the target shown below. It has been sitting in the back of the safe and has spent more time being moved around in the safe than being used. After scratching the stock with a bolt from another gun in the gun safe, I decided it was time to get rid of a couple things. (Scratched both sides below the action, shown in pictures)

Scope with rings NOT included but will consider selling at additional cost... SHV in mils.

Shoots about 1 MOA at 100 yards with Winchester ammo and KG Made can. (only ammo I had on hand).

Price Dropped 09.23.24 to: $1,400.00

Radian Upper with handguard - $600 shipped


Trades: Baja Designs Onx6+ 30” Arc, Baja Designs Squadron Pros x 2 or 4

Have an IMI 308 galil AR with the box/cleaning kit/ manual and stuff. Always wanted an m40a1. GAP rifles are looking good. Curently have an m24 so an A1 should go good with it right? Stupid idea? What are galils brining nowadays?

Looking yo sell this Leupold Mk4HD with PR2 reticle. Looking to move to later gen Kahles 624 LSW.

Sold shipped

null

Operation Atlantic resolve?

Mich. Middle School student that refused to stand for the Pledge of Allegiance told to go back to her own country by her teacher.


Now listen to the teacher and go back to your own country, you hairy POS. And try not to stab anybody on the way out.

I have 5 new suppressors that want to I move. All are brand new and i will cover shipping. I can easily transfer it to your local SOT dealer so you can finish paper work.


AAC MK13-SD .30 FDE $765 (silencer shop has them in stock for $950) I have three of these.
Silencer Co Octane 9 $395 i have two of these as well.

PayPal
Money Order
Credit Card with a fee

I have two brand new Odessa 9 cans i want to move. Both are brand new and i can easily form 3 them too your local dealer in a few days. Silencer shop has these for $759. $585 Shipped
Paypal
Money Order
Credit Card with a fee

Brand new CGS Hyperion k at my dealer under form 3 and ready to ship.

$1000 shipped

McMillan M40 Smear stock. 700 short action. M5 bottom metal inlet. $750 shipped.

In excellent condition, low round count. Under 100 perhaps, for sure under 150. Includes a Spikes melonited gas tube. Hard to find these days.

$135 TYD via Venmo/PayPal. Ships USPS with tracking.

Like new wrong box $1750 shipped