Mark 4 HD 8-32x56 PR2 Mil with Masterpiece Arms 1.125, 0 MOA mount.

$1050

Athlon Ares ETR 3-18x50 MIL APRS6 FFP. Brand new never mounted bought on Midway a few months back, but never found a rifle I wanted to mount it on. Includes original box, throw lever, scope caps, sunshade, and manuals.

$545 shipped and insured.

I have this crossposted on Reddit GAFS where I have 225 confirmed trades under username AlternativeStation29.

Message me if you're interested.

I can accept payment through discreet PayPal FF, zelle, cashapp, or venmo.

Atlas BT65 NC with Henderson ARCA clamp and spiked feet.

$250 Shipped

I'm getting a rifle with a 26 inch varmint barrel and a 1 in 12 twist, will 55 gr. fmj stabilize past 200 yds.

Athlon Ares ETR 3-18x50 with Mil reticle mounted in Warne mountain tech rings low with MKM bubble level. This is my second Ares ETR and I picked it up on impulse when I couldn't believe the sale price EuroOptic had them for, but I have more scopes than I have rifle to put them on and don't actually need it. In like new condition; just mounted din rings and taken for one range trip.

Awesome scope that punches well above its price point especially if you pick it up at this price.

$620 shipped for just the scope or $720 shipped with the rings and bubble level.

The Mil version is out of stock and even if you did pick it up at the sale price it cost more than this after you add in tax.

I have a b14r with a benchmark 1.200 straight, comes with what you see as well as 3 10 round magazines. Bought through Bison tactical/chambered by Modacam.
Super smooth, extended SS bolt handle with a area 419 knob,419 30moa rail..
Shoots great
1300 Shipped
Thank you

Hi
I got a used Barnard S rifle. Tested it out and seemed fine.
Now, if I close the bolt and lift it, there's just a tiny lift pressure. More or less the same as my other Zermatt rifle. If I close the bolt, pull the trigger, with no round in the chamber of course, the lift is considerably heavy than without pulling the trigger. Is this normal? What causes this?


Thank you

Selling spuhr mount sp 4001. 34mm tube. $350 shipped comes with box and level in great shape

Previously owned 3 Surgeons (591 Short Action) from Prague OK. Looking for thoughts from owners of both on how current Surgeon actions compare with Accuracy International actions? Previous Surgeons were trouble free and built like a tank. No experience with AI. Thanks.

Test fit, but never fired
Will ship in original packaging

70 shipped via PPFF, venmo or zelle

Selling this Llama chambered in 380.
Has some handling wear and a small scuff on the right rear of the slide.
$280 shipped.
PP, FF, or USPS MO.

Looking to have a stainless barrel coated to match an action that will have a few barrels I’ll swap occasionally. How well does cerakote hold up under the clamping force of a barrel vise? More specifically the viper barrel vise.
Thanks

Anyone here that have experience with Guide’s thermal clip-ons?

More specifically their TB Pro series:


These are starting to trickle into the European market, at a price that is reasonable.

I know it’s not Oasys units, but I wondering how these would stack up against Pulsar units.

For Sale:
MAGPUL PMAG SR/LR mags (AR10 - 308)

(8) 20 rounders NIB
(1) 20 rounder used
(1) 25 rounder used

Selling as one unit, not splitting
Not shipping to any communist states

$130 shipped

Hey guys, for those of you that run an attached sandbag on top of your tripod like the cole-tac for instance, do you run it with or without a head?

I'm sure it's prob possible run it with a head but it seems like that would be weight for nothing.

Do you really need the ball feature when you have a flexible sandbag?

Can you attach something like this directly to the tripod without a head and is it a good idea?

I have an extra Nightforce NX8 4-32x50 that I’m looking to sell. It’s a C641, second focal, MOA. Scope has been set in rings but never torqued down. Never been outside my house. Come with everything that is shipped with the scope new.

$1750 shipped lower 48. Zelle, check or money order.

Came across an MSM video from Triggrcon with Killer Innovations/Icon Defense talking about their upcoming monolithic uppers.

Mono upper info starts at 4:37
Login to view embedded media

Gents,
I need one. If you have one of these old boys sitting in your safe / bench and would like to part with it, LMK.
Thanks
ST42

I have an excellent condition Chris Reeve Umnumzaan with Tanto Magnacut blade. The blade is factory sharp and this was only carried a few times. There are a couple minor snail trails on the lock side, but you can only see them in the right light.

I am the second owner and the lanyard did not come with it. The lanyard pin is included as well as the box, birthday card, cloth, loctite, grease and tools.

Asking $475 shipped

PayPal FF, Venmo and Zelle for payment.

Selling my Mk5 HD w/PR1 reticle and illumination. I bought this scope off here 2 years ago and did not get a box or accessories, so scope only w/ flip caps $1,750 shipped to lower 48

I’m in the concept stage of planning a match and need some starting points on things that need to be addressed.

It will be a fund raiser as well as a primer for hunting season. So it’ll be simple stages tailored for the local population who isn’t into competing.

What are some logistics I need to take care of as far as legal, liability, etc? Is it even worth doing as a fund raiser once all the things are accounted for?

It would be on private land, not a dedicated range. I know things vary by state, but looking for a general idea.

Alright, Clone Fanatics, here it is, the thread you’ve been waiting for! This is the place to profess your interest in buying a MST100 (Not saying Unertl or USO) scope.

I had a lengthy phone call with John Williams III today regarding the possibility of having a run of scopes made. He is interested in completing the project provided there is commitment for the sale of fifty (50) of them. That commitment will probably be in the form of some kind of deposit.

The production will likely be a hundred (100) units, as machine shops don’t normally care to program machines and gear up to do less than that.

He is going to do some work in the next couple weeks to try to arrive at a price. However, with the cost of materials these days, he estimates that they could cost approximately $4000.00. Keep in mind that time is valuable, and his work to narrow the price of the scope down takes him away from what pays the bills. With that said, like the car sale websites say, no tire-kickers, please. I know that with the price up in the air there will hesitance and a somewhat tentative nature to this, but please be serious when you say you want X number of scopes.

I am not getting paid or compensated in any manner for any of this. I have simply created a thread for you guys to speak up. I’ll tell him what you all say. The way this thread turns out will determine whether the scopes get built or not.

So, have at it.

At a per unit cost of approximately $4000 each, who would buy a newly manufactured MST100 scope?

I received these in a trade and don’t need them

The mag is cmmg barrel and bcg are unknown

200 shipped obo

Swarovski 15x56 SLC Binoculars No Trades
Like new used for a season no falls or scratches

$ F&F or add on the fees.

If you have any questions please PM (Private Message) Me