Looking for a 700 SA clone action or BA with a clone action with the following:

Musts:
18-22” barrel
Threaded at muzzle
Short action - Right Hand
Lighter contour barrel no larger than m24/proof sendero
Prefit compatible (shouldered)

Preferences:
Steel barrel shouldered barrel
Factory ammo available

Not looking for the following:
Stiller
Christensen
Bergara
Curtis

Used at the range once but no longer shoot 308 and dont plan to rebuild my stockpile. I can include the factory wide MR762 stock with the purchase. Comes with the original case, accesories, etc... Geissele Trigger was added (original not avail) as well as 3 extra 20round mags.

$3700 shipped.

Does Sako make their own brass? How does it seem to compare to the rest of the brass options out there?

I found some factory loaded TRG 6.5cm with 136 scenar L on sale that I’m going to try out.

Hi to everyone, I shoot 22lr bench rest with a Hole Shot 2500X in unlimited and a CZ457MTR in factory division. I have won my share of monthly matches with both rifles. I finally shot a perfect score last September with my 2500x. Currently I’m looking to build a precision 10/22 for the semiauto division. This looks to be a very informative sight and I look forward to sharing info and ideas with everyone.

Selling Vortex Gen lll 1-10x24 scope with MRAD EBR-9 reticle. Scopes was mounted on rifle, but never used or taken outdoors. Excellent condition. $1650 shipped.

Came across something while cleaning my suppressor and I wanted to share what I found. My hands were covered in carbon from scrubbing my baffles out and I noticed that zep cherry bomb hand wash took it off real easy. So I came up with the bright idea to try and scrub the baffles with it. Worked amazing for getting the majority of the carbon out. Anyone have any experience with using stuff like this?

For sale - Lightly used Left Hand Elite Sand Accuracy International AXSR rifle. Slightly used 20” 300NM barrel w/Area 419 Sidewinder brake/suppressor adapter - 400 rounds.
Unused 27” 338LM barrel with APA brake.
4 Elite Sand 338CIP magazines.
LH 308 bolt body - never used.
Dependabilt R-Lock ARCA rail.
Not interested in parting out. Only possible trade considered, would be left hand Accuracy International AT rifle and cash.
$8000.00, buyer pays shipping and insurance.

NIB Leupold Bino Field Clamp - $35 shipped
Accept paypal and venmo

Located in Danbury, NH. PayPal friends and family or add 4.0% to cover fee's. Prices are shipped.

Bending Branches Angler Pro 240 cm (94 1/2”) 32 oz (actual, not estimated) Carbon handle and paddle, push button ferrule with solid lockup, no play/slop. Very superficial scratch on one of the blades, see picture. $150.00

Werner Skagit 230 cm (90 1/2”) 34.9 oz. Slim grip (not as large in girth, great for smaller hands) carbon handle with adjustable ferrule. Excellent condition $110.00

NRS Paddle Bag, hold’s (2) kayak paddles up to 240 cm each. $40.00
View attachment IMG_5377.jpeg
View attachment IMG_5378.jpeg
View attachment IMG_5379.jpegView attachment IMG_5380.jpegView attachment IMG_5381.jpegView attachment IMG_5383.jpegView attachment IMG_5384.jpegView attachment IMG_5385.jpegView attachment IMG_5386.jpegView attachment IMG_5388.jpegView attachment IMG_5389.jpegView attachment IMG_5390.jpegView attachment IMG_5391.jpeg

I'm just going to post my vote for any position in the top 5. Maybe number 1. But, hey, there's some good scenes out there.

Login to view embedded media
You don't have to post a link... just describe it if you want. Looking forward to discovering some new movies out of this! No restrictions on Genre, era or TV/Movie. Miami Vice and Magnum have scenes as great as North by Northwest or Dr. No.

Cheers!

Sirhr

Good condition Vortex Viper HS LR 4-16 x 44 Dead Hold BDC FFP (MOA). Scope includes Weaver Tactical rings, Vortex bubble level and rear objective scope cap. $250 Shipped, accept venmo or paypal.

Nice AICS 2.0 folding chassis with OD green skins. Stock is overall in very good shape, with only 1 larger scratch (pictured), no bedding and inlet is in very good condition. For Remington 700 Short Action and clones. Comes with AI marked thumb wheels, B&T bipod adapter, and UTG bipod.

$2200 shipped, PayPal F&F, Venmo, Zelle, USPS MO. SOLD

Great condition Burris BTS 50 Thermal scope. Comes with the standard gas gun mount and the hard to find bolt gun mount.

Comes with both mounts, factory case, 18650 battery charger and cord.

This was a backup therm and don't need it anymore.

$1000 shipped and insured conus.

****SOLD****

Trades I'm interested in: +/- cash on either side.
Mk5- pr2 ret
Solus action
Aimpoint T1/T2
MRO HD
Prem AR uppers
556, 6.5 ammo
?

Good morning everyone. I am looking at building a rifle in 6 ARC and I’m curious what part combinations people who have some time on their builds have had success with. Specifically I’m talking about barrel performance, gas system setup that has been functioning well and buffer tube setup. Thanks and I appreciate any insight!

I have a bunch of stuff sitting that’s not being used, will sell or trade. Sig 226 optics ready with an sig red dot, and 2 mags. $1200 Century arms ap5p mp5 clone that has ran flawless suppressed and has a rail, and a couple mags $1300, Glock 35 with a Suarez slide and barrel, optics ready and has a Glock 35 slide and a 9mm alpha barrel, $700, 6.5 Grendel upper with a faxon arms match series 16” barrel threaded 5/8x24, $350 Wilson Combat lightweight 1/8 twist 223 barrel, $200, mk12 mod 1 6mm arc upper $900, vectronix plrf-10 with Swarovski doubler, $1500

Things I can use, will add cash or take cash where needed.

Staccato, CZ 75, quality 6mm arc barrel, 9mm and 556 range ammo, 147 grain 9mm ammo, CFE powder, rcbs chargemaster powder measure, trijicon reap ir thermal, pvs-14, 308 gold medal match ammo, 6mm arc dies, modlight flashlights, surefire x300b ultra and turbo lights

Brand new in box Proof Research carbon 24 inch 6.5 creedmoor barrel, for Terminus Zeus QC action. $700.00 or make an offer.

Any rock collectors?

I have always thought unique rocks are cool. But never learned much about them.

Feel free to post cool rock pics.

Got a Manners T4A team stock for sale. It’s for a Remington 700 sa footprint and has an Area 419 arca rail with baracade stop. It does have the gen 2 mini chassis and will fit a 1.25 straight taper barrel. Stock looks great the arca rail does have a couple scuffs from bipod and tripod. Price is 1150 shipped and insured PayPal or Venmo pm me and we can exchange numbers to discuss more only trades would be toward foundation mg2 or centurion

55 boxes of 20 Hornady Black 223 75gr. All same lot number.

$800 shipped for all 55 or $15 each shipped


PayPal FF, Venmo or Zelle

So I’m chambering a 30 Sherman to you with. Chamber is perfect per the supplied gauge, which is lasered “Manson-30 Sherman Magnum”. Bolt falls closed on it, can be closed with moderate effort with a .0015” piece of scotch tape on it. After torquing, should have about .0005 clearance on the Go gauge.

Thing is, it falls closed on a piece of either loaded factory 300 PRC ammo or Hornady PRC brass. It occurred to me that possibly I was supposed to chamber short on this gauge, but I have a SAAMI 300 PRC gauge and it is definitely longer than the one for the 30 Sherman. What would y’all advise to do? I can take material off the shoulder and tenon to problem, just want to do the right thing.

Just completed a 308 build with a zermatt big horn origin action, proof 20" carbon barrel and timney elite hunter trigger. After completing the build, i popped in a mag with 308 snap caps and about every 5/6 cycles of the bolt the firing pin goes off/decocks itself when closing the bolt. I took out the mag and cycled the bolt again and still experienced the same thing happening. My question is , has anyone had this happen before, is there something in my build I missed that might be making this happen or is there a fault with the bolt/firing pin/action? Any help would be appreciated. I'll see if i can upload a short video tomorrow. Thanks in advance for any help

BNIB
3 mags and CH plate
Mostly looking to trade but willing to sell for
$1k plus shipping

Can trade up or down
Looking for
Mk4 w/PR3
G45/48
Dillion 750
CRB barrel
Ckyepod
A300

I bought this several years back but haven’t taken it out yet. I bought it from a guy in northern CO. He shot some matches with it and used it as a practice rifle. Can’t remember the round count but I believe it was in the 800s. He said it still shot very well. Don’t have any load data.

It’s in a bergara action and chassis. 7 twist. 28” long. A heavy barrel contour. 5/8 24 thread. The scope, mounts and bipod are not included.

$1050 shipped firm

The action has seen 0 rounds, will come with original box + original accessories. .478 bolt face.

The barrel is a proof research carbon prefit, sandero profile 20in chambered in .308 1/10 twist. The barrel has seen 150 rounds.

Barrel came off of my other rifle but ended up dumping a lot on my tikka that’s also chambered in .308

Had plans on making this sort of a shorty .308 but not ready to go through the build process at the moment on the solus.

$1200 shipped