Recent content by sherlok

  1. S

    Rifle Scopes Help for 300 blk optic...shooting all subs

    Hi CDT, I did not post the speadsheet, but rather the resulting range chart. Do you get that? I'll try to find the source for the spreadsheet that you can download. It's on a different computer, but there are a number of good ones out there for free. You can also email me at...
  2. S

    Rifle Scopes Help for 300 blk optic...shooting all subs

    Really CDC, the Whisper or Blackout sub-sonics do not require high end optics as there is a practical limit of about 300 yards for this round. What you need is a way to repeatedly elevate the muzzle for a given distance because its almost like firing a mortar. I have been using a cheap ($60) 4X...
  3. S

    Private NON licenced reloaders

    Re: Private NON licenced reloaders Just not worth it Guys. You need to consider the litigation risk in everything you do these days. If his gun blows up it might not even be your reload that did it. But do you have the resources to prove it wasn't? These are the times in which we live. God...
  4. S

    Suppressors Hunting with a suppresser

    Re: Hunting with a suppresser I shoot a 300 Whisper with suppressor which is the bees knees in quiet shooting. But it requires practice to be effective because of its rainbow trajectory. I have been working for a year and a half in load development and establishing range charts. I am just now...
  5. S

    Night Vision New NV Bracket

    Re: New NV Bracket Thank you, mcmillanman5. Could not for the life of me get that thing to show. Sherlok
  6. S

    Night Vision New NV Bracket

    Hi All, I've been trying to utilize relatively inexpensive NV monoculars as sighting equipment for several months now and have come up with a pretty good system for those (which includes me) on a budget. It is what it looks like...3Gray.jpg[/IMG]</a>[/img] The beauty of the thing besides...
  7. S

    What is needed to make .300 blackout from .223?

    Re: What is needed to make .300 blackout from .223? Watch your neck wall thickness. It should be about .015" or less. You might need an inside neck reamer (I use a Forester .304" special order) which gives a nice grip on a .308 bullet. J. D. Jones strongly recommends sizing up from .221...
  8. S

    Weight Sorting Brass Variance?

    Re: Weight Sorting Brass Variance? It's been my experience that case weight has no statistical correlation with case capacity at least with military brass. I have more acute problems with bullet length variations and hence cartridge overall length variations even with match bullets. My time...
  9. S

    Anybody use a company called "Trigger Action"?

    I'm reluctant to give credit card info to any company I'm not familiar with. With the name "Trigger Action", you pull up everything but information on their company when Googling it. No where in their site do they even show a physical address or location. They may be legit, but because of this...
  10. S

    Remington 700 SPS tactical .223 question

    Re: Remington 700 SPS tactical .223 question My SPS Tactical likes 24.0 Grains of H4895 the best with that bullet. Never tried RamShot, but it does not shoot well with Varget. Seat it as far out as possible as long as it fits the magazine unless it bumps the lands. Then back off a few...
  11. S

    40x and Winchester 52 on CMP website

    Re: 40x and Winchester 52 on CMP website Original 40X stock available on Gun Broker: http://www.gunbroker.com/Auction/ViewItem.aspx?Item=239234017 Sherlok
  12. S

    Ultrasonic cleaner review

    Re: Ultrasonic cleaner review I just bought a small ultrasonic and it works in someways better than tumbling such as it cleans inside the case much better as well as the primer pockets. I use 50% vinegar/water and a touch of dishsoap. I will probably use both systems, but I'm a bit annal...
  13. S

    Case trimming advice

    Re: Case trimming advice Well I'll chime in here. I've always used the RCBS Trim Die that you run the case up into and if the case protrudes above the hardened steel surface, you shave it off with a file. Then chamfer with a Wilson tool. The gripping case holders of the Forster type hand...
  14. S

    which bullet puller????

    Re: which bullet puller???? You need both. Sometimes you can bump the bullet in just a tad to break the bond created by time and still get a grip with the collet, but usually not. So you have to pound them out with the inertial puller at least far enough to get a firm grip. Lead bullets are...
  15. S

    cheapest source for sierra 69 SMKs

    Re: cheapest source for sierra 69 SMKs Try Nosler Custom Competitions in 69 grain. They are usually cheaper and shoot equally well. I use them as well as their .308s in 168 grain. Sherlok
See more
Top Bottom
Back
Home
Forums
Merch
Alerts