Search results

Search the forum Search Articles
  1. T

    1 piece mounts for DT

    Need a 34mm mount for my DT SRS. I've been using an AADMount in 30mm for the last 4-ish years and have no complaints. Not against buying another one in 34mm either but I am curious what others have used. Prefer to keep it in the $300 or less ballpark.
  2. T

    Bullets sticking in Redding die

    80gr Eldm and berger vld bullets are both sticking in my Redding comp seater. I have tried both the vld and standard plugs. Both stick. Both leave visible rings on the ogive. Brass is brand new lapua 223 fl sized. Going to check neck tension in the AM and probably see what Redding says. Anyone...
  3. T

    KRG offset mount users

    how well does this mesh with a pvs-22 on a rem 700 SA? im about to drop some money on a new gen 4 and a friend has a night sight i can borrow from time to time. i dont particularly want to invest another $300 in the spigot and IMUNS if the $75 offset will work the once or twice a year i will use...
  4. T

    KRG W3 owners in GA

    Need some help narrowing down stock/chassis options. I've sat behind the other options but haven't been behind a w3. Anyone in the northern half of GA have one that I could get behind? Maybe hit the range? I know some folks are superstitious of their rifles so I don't have to shoot it. Just...
  5. T

    Primer pocket uniforming depth

    I bought a Sinclair uniformer to use on my 308 brass. I had a lot of fgmm and win brass so I weight sorted and picked the best 50 of each. Did the brass prep thing. Sinclair says their cutter uses the shoulder as a stop so I cut till that sob quit. Well I seat some fed 210m and I'm looking a...
  6. T

    Suppressors SilencerCo Harvester

    SilencerCo: Harvester Launch; lightweight, accurate, dependable. - YouTube for those in the know, why the brake on the end?
  7. T

    OCW interpretation

    i have been trying to force a load with CFE for a while first using 178 AMAX and now 175 SMKs. i see nothing here but perhaps a more trained eye can spot something. all were fired round robin style with 10 min cool downs inbetween shots except the 3rd shots (and 4th in some cases) which had to...
  8. T

    Temp causing groups to open?

    finally got to range after a 3 month hiatus. brought the chrony along to get some cold-ish weather data on rounds that shoot lights out during the summer months. unfortunately i dont have data during the warm months so i cant compare yet but perhaps someone with a similar setup can extrapolate...
  9. T

    Veteran's locomotive

    every so often I am proud of my company showing support for our vets and troops. (1 of 4 hires is a vet BTW) these engines are stripped down locomotives made in the late 80's that a rebuilt with a custom cab in altoona PA. enjoy http://www.youtube.com/watch?v=2eAk2rWjG...mp;feature=plcp
  10. T

    Ladder Test results

    So here is 3 powders lobbing 178gr AMAX. not sure what to make of the results. (ignore the .22 holes in the middle target and bottom target of CFE223. Sebben lit them before i got pics.) Varget. 42.5-44.5 gr. in .5 increments RE-15 42.5-45.0 gr in .5 increments CFE 223 45.0-47.0 in .5...
  11. T

    Gunsmithing Rem 700 AAC-SD threads

    sniper google referenced me to some posts about the factory threads might be off quite a bit. is it possible to re-thread or clean up the factory threads without cutting, recrown/rethread? is there any way to tell if the factory threads are serviceable without having to pay someone to take it...
  12. T

    Gunsmithing Cerakote Q's

    Want to get my remmy done. On the website they show companies that do it and then companies that are 'certified'. Should I put any stock in the factory certification? secondly, when stocks (and polymer frames for pistols) are done, this is the air cure formula correct? lastly, who does good...
  13. T

    168 SMK seating depth

    what are you guys getting measurement wise from the case head to ogive? i used my LnL OAL and comparator and took 12 measurements. longest was 2.349 shortest was 2.340 avg. was 2.344 while i have no problem using this measurement. the bullet base is about even with the bottom of the case neck...
  14. T

    badger/talley compatability

    So I mounted my talley tactical rings on my badger base and noticed that the dual recoil lugs on the rings have almost 0 contact surface with the cross slots. Has anyone used this combo with no ill effects or should I look at a different base or rings? Any recommendations for a base that doesn't...
  15. T

    Rifle Scopes Which SSHD?

    time is slowly ticking away on the HD deals and I don't know which way to go. my rig is a 308 aac-sd, 20moa badger rail and 30mm talley tacticals. shooting paper/steel out to 800yds. doubt it will see hunting unless a squirrel runs onto the range. this rig is a training tool for me as I've not...
  16. T

    Gunsmithing scope base bedding

    I'm sure the topic has been beat to death but I have a specific question about my setup. I've placed my 20moa badger rail on my aac-sd. Torqued the front and there is almost zero play. I might be able to stick a .001 feeler into the gap. torque the back and its the same story on the front. Very...
Top Bottom
Back
Home
Forums
Merch
Alerts