Hello;
I just started working on some new loads for my Seekins Havak Element in 6.5 PRC with the Berger 156gr EOL bullet
Starting loads where determined using Quickload 3.9. COAL at 3.055". Trimmed to 2.015" CCI-200 primer.
At this time i was just looking at measured velocities and checking the brass for signs of over pressure.
IMR-7977
57.0 gr - 2742 fps
58.0 gr - 2810 fps
IMR-8133
59.0gr - 2781 fps
60.0gr - 2820 fps
This is just a start as information I have found online is limited. Any information that you can offer based on your experience would be greatly appreciated.
THANKS!
I just started working on some new loads for my Seekins Havak Element in 6.5 PRC with the Berger 156gr EOL bullet
Starting loads where determined using Quickload 3.9. COAL at 3.055". Trimmed to 2.015" CCI-200 primer.
At this time i was just looking at measured velocities and checking the brass for signs of over pressure.
IMR-7977
57.0 gr - 2742 fps
58.0 gr - 2810 fps
IMR-8133
59.0gr - 2781 fps
60.0gr - 2820 fps
This is just a start as information I have found online is limited. Any information that you can offer based on your experience would be greatly appreciated.
THANKS!