Cps and primer pocket reader

[ctsvnino]

So I received a box from primal rights. Totally stoked about it. Got the primer setting tool ok on the in-line fab mount. Now the primer pocket tool got messed up in transit. I pm him on Instagram going to take care of it after New Years but in the mean time I repaired the legs which was the screws came out and popped off. I adjusted the dial to zero. I’m a machinist in the union so I have knowledge on the dial indicator. Other than cosmetic the thing built like a beast!! I’ve checked the tolerance and it’s perfect. I really don’t know if it’s with shipping back but I will

 

[Choid]

Nice. Orkan does not cut corners on his stuff.

 

[ICU22250]

I would love to have the Prime where to go with my CPS's, Greg's products are fantastic and very robust. He also takes a great bit of pride in assembling them to make sure they are done correctly..

 

[Barelstroker]

Very nice gear indeed.
The primer pocket reader is the 1st & only reader that I've heard of that's available to reloaders.
Just looking at the pic of the dial. It looks as though it resolves down to 100ths of 10,000ths which is quite impressive.
So the numbers 10, 20... & etc are 10ths of 10,000ths or 1000/10,000 each. The smaller divisions are 10ths of 10ths of 10,000ths or 100/10,000ths each.
It seems extremely well designed & built & I'm impressed with Greg's efforts.

 

[RegionRat]

The primer pocket reader is the 1st & only reader that I've heard of that's available to reloaders.

Not the first, but certainly a better design since it is on it's own stand.
I have used this one for a while now and like it very much.
While you can mount it to a bracket stand, most of us just hand hold it.
It covers large and small, does pocket depths and seated primers too.
https://bullettipping.com/products/precision-primer-gauge/

 

[Dogtown]

https://bullettipping.com/products/precision-primer-gauge/

Their seating gauge is also fantastic.

 

[Barelstroker]

Not the first, but certainly a better design since it is on it's own stand.
I have used this one for a while now and like it very much.
While you can mount it to a bracket stand, most of us just hand hold it.
It covers large and small, does pocket depths and seated primers too.
https://bullettipping.com/products/precision-primer-gauge/

View attachment 7785416

Yeah right, haven't seen it before.
Looks pretty flash.
At the moment I'm using the Lee auto prime. It works "ok" but, the primers hang up in the holder which, I have to keep tapping to keep the primers feeding &, although I've had no trouble with it other than that, when I have to press the lever hard for the odd tight primer pocket, it feels like it's gonna shit the bed. It creeks & groans & I expect it to shit itself eventually.