M 72 LAWS ROCKET 66 mm Light Anti Tank .. (HEAT) rocket , Vietnam era till recently.
Launcher in pristine condition w sample projectile.
Unfired and ready for your 4 th of July party.
Has original Manual in excellent condition ..
PayPal preferred and will ship insured ..
No ordnance in the sample rocket ..

Login to view embedded media


I bet he won't take a single 9 to the chest

There are so many good choices, it's hard for me to choose. I'm now able to say the community has good choices, because we get really good data presented to us by well known and well regarded industry voices. But it can be overwhelming.

Instead of presenting my list of selected devices and asking you for help with a down select on the choices, instead allow me to present a use case and a set of pre-defined "desirements". I think that would help me pick up on something that I might have missed. That's happened recently.

I'm a retired engineer that fusses endlessly about The Details. I was a good engineer. It does not help when faced with so many good choices. I mention this because that experience has taught me that building machines is an exercise in compromise. Tradeoffs.

So, the use case is 30 cal rifle: 308 / 6.5 CM / 6.8 SPC / 300 AAC BLK / 7mm Rem Mag Maybe, but this would be the upper power limit. Not 338 level or above. Range 500-600 yards, no more. No PRS work, but precision is always a bonus. "Only Accurate Rifles Are Interesting", but I dont compete even casually. No Mag Dumps, I dont have access to that level of fun. At the lower end of that power range is the 300 BLK likely on an AR Pistol. This is the Suppressor sub forum, so of course Mouse Farts will be part of the use case. Will it see 556 use? Likely, but not primary. I figure a 30 cal can on a 556 rifle is a safe use case for the can, given the power range already mentioned. Concussion and Recoil Reduction at the range and hunting, and Home Defense indoors on a shorty AR. Thats a pretty broad power spectrum.

A "hard use", or FA rating, is desireable but only from the perspective of less things to remember about a barrel length, or shooting schedule, or things going Tango Uniform because I let it get too hot. Not likely, but also not out of the realm of possibility as my memory gets older. Hard use cans usually get a bigger BC designed into them, and that usually improves suppression performance and opens up the accessory selection some, too. So, thats a trade.

Ti cans are a difficult selection for me right now. I dont have any, and all I have are the YouTubes to judge by. Some Tubers speak to the Ti Sparking Effect. Some say all the cans exhibit this always for the can's lifetime, some say it's a temporary thing (being mostly over and gone after the 200 shot break in period), some say it never goes away. Some say the effect only appears when the can overheats, some say a Hybrid Steel / Ti is The Way. I have face to face discussions with behind the counter experts that I trust that tell me they have witnessed Ti cans ripped apart from abuse (outside schedule conditions). OK, Duh. I dont know what to believe. My Take on Ti cans currently is, I dont have to have this feature of Lightweight in the Tradeoff considerations, OR it can be relatively Low on the Desirements. My Bottom Line on Ti is, I Know I Dont Want to deal with Sparking during some of my Use.

Back Pressure: Im not convinced that High Flow cans are The Way forward. The Tubes I've seen demonstrating them look like there is still plenty of gas in the face while using them. There is likely a recoil and concussion reduction, and there is the feature that says No Rifle Gas Adjustment needed. Which would be good positives. All my stuff has adjustable gas, so this High Flow / Low Back Pressure becomes a Dont Care for the operating system conditions. They are noticably Noisier than other types. That I do care about. If you present a High Flow choice, it will be given equal consideration. I'm Listening.

Hub / Bravo Interface: This is Must Have. The can will not be mounted permanently, but mobile between firearms.

Modular: Pretty much a Dont Care to me. It means more seams that can fail, and O-Ring Maintenance. The plus side of course is, more adjustment choices on a single F4. Thats a pretty good trade.

Suppression: Job One, right? More is better. Of course.

Size: Ah the other side of the Suppression coin. You can play with Physics and try to tame it, but you must play the game. Smaller is better. I would put an outer limit on length at 6", for the can only. Thats a pretty long tube for the lower end of my power use case, with a mounting system in place. Some of these new all-steel designs are approaching Ti can weight, which is good. Weight is a Dont Care. Except if its made from Depleted Uranium. Then You Hump It. Diameter is a Dont Care. Rifle Sights now sit on top of big stilts these days, what with 55mm front objectives and 2" standoffs for AR sights.

User Servicable: Dont Care.

Removeable End Caps: Dont Care.

Dead Air: No Thanks at this time.

Cost: Dont Care. Not Gold Plated, OK?

So, what do you think? What cans should I be considering?

Happy V-day from Texas

Seems pretty funny the sudden uptick in shootings lately…. False flag events keep happening and not surprised seeing how election season is coming

Democrats in Boston are urging people to house migrants in their homes to help with the overflow in the city. I say suck it.

I was mentioned in Meat Eater Magazine in reference to the Lilja barrel I chambered for the author. I thought it was pretty cool.

Developing story but caught my eye today. Only additional info in the article is the following:

"Fox News Digital obtained the notice sent to congressional members Wednesday, which pointed to "an urgent matter with regard to a destabilizing foreign military capability that should be known by all Congressional Policy Makers."

Curious if this will turn out to be a dud or something real, maybe we'll find out? Curious on everyone's thoughts as always. Link below.


House Intel Chair warns of "serious national security threat", urges Biden to declassify

Morning all

Having decided to change over to Arbor Press reloading system I'm having an issue finding a press.

Looking at temporary alternatives I came across a hand drill press on eBay


Given I can buy a 200mm length of 40mm diameter aluminium bar for less than £10 means a press for £25

Anyone done anything similar?

Lol, don't know how well it works, but love the advertising. I'll probably try it out because it gave me such a good laugh.

I mostly hunt pigs and coyotes, and I’m starting to get the itch to stretch my legs a little more with long range target shooting, ELR, and trying PRS for fun when I can get time away from work and family.

I already have a .308(sig cross) for my lightweight hunting rig ( I plan on trying out NRL Hunter with), and a 300wm (browning bolt) for my longer range big pig gun. The browning is alright, shoots around 1moa, but it’s really light hunting focused and has a thin barrel that doesn’t string groups well when hot.

I have plenty of ammo invested for both. So I’d like to stick with those two calibers as much as possible.

I’m about to pull the trigger on a MPA BA PMR pro 2. Trying to decide between long action 300wm or short action 308. But for some reason, in my head, it doesn’t really make sense for me to spend 3k on a competition .308 rifle when my chassis sig cross already shoots sub .5moa (w/Sako ammo) and it probably won’t really scratch that long range itch of easily shooting 800+….. but I also am tracking that 300wm isn’t the ideal cartridge for PRS for obvious reasons….

I guess, if you were in my shoes. And only had enough money to spend on one rifle for a year or two.

Would you buy a 308 MPA and run it PRS?
Or
Would you buy a 300wm MPA and run it PRS, and ELR? How silly would it be showing up to regional PRS matches with a 300wm? Is it possible to practice enough where a 300wm can compete closely with the more popular calibers?

Selling a NIB TriggerTech Diamond RH Flat shoe trigger for Remington 700 style receivers. Box is still sealed.

$250 TYD. PayPal F&F or buyer covers fees, or Venmo. First “I’ll take it” followed by a PM wins.

Selling Manners LRH Short Action Mini Chassis with OTM M5 Bottom Metal
$1100 shipped.
The LRH has the full length arca rail installed.

Weight: 2 LB 6 oz without bottom metal, 2 LB 10 oz with bottom metal.



Picture for reference, scope, bipod, and action not included.


Paypal F&F only.

F ing disgraceful

#professional



This is what happens when academy’s / establishment drum into their heads that everyone is out to get them when they aren’t even in the top 10 most dangerous professions.


And the other professions are actually legitimate productive industry. Not criminal organized crime






Wonder what a little person that was ccw would get charged with ? Think they’d lose their permit?

Going to start planning my next 1K build. Going to build off my R700 222. Already have the Grayboe Renegade with M5 bottom metal. Trying to mainly decide on twist. Going to go with a Bartlein/Brux 26-28" rem varmint. I want to shoot the 53g vmax for splat factor out to 500 and then also the 75/80g ELDMs for 1K. Do I really need a 7 or 7.5 twist, or will an 8 suffice for the 80s? I read too much and it seems pretty split between a 7.5 or 8. I also might add I'm only at 500ft ASL and Winters here get down to sub zero temps at times. My concern with a 7 or 7.5 is it will rip the 53 vmaxs apart. However the main purpose of this rifle will be 1K steel, so if I really need the 7 or 7.5 for the 80g eldms I'll obviously go that route. Just trying to see if the 8 will work for all 3 bullets. Thanks!

Unused, stored in display case, Project II. Once-piece design. The rivets on the sheath have a small bit of oxidization (pictured). The knife is flawless. No box.

$1500 $1150 shipped. Not looking for any trades.

Already reported. Stole pics from this listing to try and sell a scope. Box doesn’t even match the scope.

Unfortunately, life has thrown me a curve ball and forced me to sell this rifle. I received this about two weeks ago and fired 10 rounds through it. Tac Ops X Ray 51 in 308. The rifle has a .022 test target shot by Mike. Surgeon Action and bottom metal with Mike's touch. Topped with a ZCO 5-27 in ARC rings. The scope has the MPCT-1 reticle. I also have a ZCO block mount coated in Tac Ops green if someone wants the whole package. No trades at this time. My loss is your gain.

Rifle only - $7000 obo shipped in a pelican case
Rifles, Optic, rings and mount - $10,000 obo (SCOPE IS SOLD)

Site has a 48 hour bump rule. Do not bump before then or post will be deleted.

Selling a nice used seekins .308 McMillan edition had um install a 16.5 inch smooth barrel to work great with suppressor shoots great with factory ammo $1400 shipped

Lightly used and in excellent condition. Works perfectly.

$325 shipped

Paypal F&F preferred/Check/M.O/Zelle

Wanted to get into PRS but I just don’t have the time

K&M Precision 6GT - barrel spun by GA Precision
Impact 737R
Bartlein 26” MTU 1-7.5 threaded 5/8-24
Area 419 Hellfire Brake
TT Diamond
Manners TCS Midnight
125-150 rounds through it…. This thing doesn’t have a scratch on it.
New Cost $5200

$4400 $4300 $4200 shipped from me to your FFL

it was time to start divesting across the board?

Surely state local and federal authorities will have to ask for and then act on arrest warrants.

Anyone currently wearing the costume- if a subject under investigation had several selfies of committing felonies you would have to at warp speed drive 100 miles an hour to their location, wait for SWAT and tanks - throw flash bangs , kick doors and shoot dogs - it’s the law you’d have to right?