Thinking Athlon Midas BTR Gen 2 HD 4.5x27x50 SFP MIL IR for my 18inch bbl AR15 Wylde 223. Want to shoot out to 500yds outdoors and 25yds indoors. I like the APRS4 reticle and IR may help indoors. I know it is heavy but, I am a MIL guy and cannot find anything lighter with SFP MIL and comparable reticle. Doug has them on sale for $509.99. Any suggestions?

A pair of MDT metal AICS pattern magazines 10rd/ .308.$100 shipped

Insite arms Heaten 4 port self timing muzzle brake 5/8x24(100 rounds fired through)
$100 shipped

Thanks for looking

Selling a new take off tikka T3x action with the short action bolt stop. Blued action with zero rounds. Standard diameter bolt face. Will include factory bottom metal and action screws if wanted. Asking $600 shipped to your ffl or if you’re in Texas ffl is not required.

Cutting Edge 22LR Die Set and 160/200 Cutting Edge 32gr bullets and brass. Price is $160 shipped.

I am the second owner of this rifle and good friends with the original owner. It had 89 rounds through it when purchased. I have since put 203 rounds through it. Details

Remington 700 short action 7mm SAUM trued and chambered by MGSS out of Rockport TX. With 20moa rail pinned in place

Rock Creek 1-8 twist 26" M-24 5r barrel.

Jewel trigger set at 1.5lbs

Bottom metal and one Accurate Mag

McMillan stock. Not sure of model as they have many. But it's heavy. I think it's an A5

Threaded bolt knob

400 sierra matchking 175 grain

74 pieces of new Remington brass and will throw in all the once fired brass.

Whidden die set

Extra forester seating die

The muzzle break is not included as the gun has only been shot suppressed, it's just a thread protector at this moment. Shoots mag length loads into 1/2" without much load work. Current load is 60.5gr of n560 under a 175 SMK. Haven't really tried anything else. SCOPE AND RINGS NOT INCLUDED!!!!

Whole package minus scope and rings $2900.00

Barreled action with jewel trigger $1400.00

Will ship from the gun shops FFL I purchase from, to the FFL of the buyers choice. PP F&F or you pay the fees. I can also take Venmo. Shipping is on me. US citizenship and address only. The accessories will all ship directly from me via USPS

Wheel gun malfunction…more likely ammo malfunction.

What do you guys say?
I will go for more of the lower cost end than high.

Thanks

I’m stuck on the xrs3 or dmr3 for my new 6.5cm build has anyone had these side by side what’s your opinion? I think the dmr would be perfect for my build but really want to justify the xrs3 . The Main purpose is shooting steel as far as I can I have places I can shoot almost a mile but I’ll be hunting in box stands on long power lines too so being able to see in low light is important

• What is the platform for the scope? Ag composites chalkbranch Curtis axiomhybrid
• What cartridge are you shooting? 6.5cm
• What is your intended use for the scope? Benchrest, Hunting, Target,
• What type of conditions will you typically shoot in?, Lowlight mostly but daylight too
• What are the typical distances you intend to shoot? 75-1500 yds.
• Are there any specific specifications you would like? Being able to count the points on a deer around 400-600yards close to dark would be nice (even if I don’t shoot )
• What is the price range you can afford? 2000$

Bought this off here from a guy that had it signed by buddies after winning a match, so I gave it a sponge paint job to cover it up and it’s sat ever since. My gun build changed directions so I’m going to let it go. Pic rail up front and I think there are swivel studs in the box. I’ll have to check. Perfect shape no dings or gashes. One mag is a 10 round AICS with the binder plate removed. The other is a 5 round PMAG that had to have the lips sanded down and they work great. It’s included for free. $320 shipped USPS priority. PayPal only. Thanks!

The Amazon logo is literally the underside of a curved dick.

Now you can't unsee it.

I have 6000 CCI 350 magnum primers and want to know will they work in the 6.5 Creedmoor.
Can’t find any large rifle primers where I’m at and going blind searching dead end sights

Thanks
Stang66

We're happy to announce that we are adding a titanium receiver to our lineup of actions. This has been something that has been on our list for a few years now and we're happy to finally have the time to produce a lightweight action for customers in search of such a thing.

The titanium action's model number will be Ti3-(X)A and will be available in short, medium and long action lengths. This product will be similar to the Origin line of actions as it will only have options for length, operating side, bolt face and bolt knob. It will come standard with a magazine well that will accept Wyatt's extended boxes for people wanting to use hinged floor plates as well as accepting AICS pattern magazines and M5 bottom metal for those wanting to use detachable box magazines. The magazine well will also accept Hawkins Precision's Hunter DBM in all three lengths without modification. The titanium action will come standard with our trim tang (same as Origin actions) and a two piece, pinned 20 MOA rail. No other rail options will be available.

This receiver will come with DLC coating and with the same bolt system that our TL3 and SR3 actions use. There will be no differences in the bolt from the existing platform so production hurdles are minimized. Barrel tenon length will also be the same as current TL3/SR3 barrel tenon length so the Ti3 will use the same barrel systems as the TL3 and SR3 actions use today.

In summation, the Ti3 will be available with the following feature set:
- 6Al-4V DLC coated titanium receiver (short, medium and long lengths available) standard with ZAI's trim tang
- DLC coated floating and interchangeable bolt head (same as current centerfire bolt heads) in 223, PPC/SPC, Standard and Magnum sizes
- Controlled round feed
- Mechanical ejection
- Bayonet style firing pin assembly (same as TL3/SR3 system in all lengths)
- Nitrided bolt body
- Two piece, pinned aluminum 20 MOA rail (able to be replaced with Hawkins Hybrid or similar ring system)

Short actions have been weighed at 22.2 ounces as compared to a TL3-SA at 31.5 ounces in the standard, stainless configuration. Medium actions are 23.1 ounces compared to TL3-MA at 33.4 ounces and long actions are 24 ounces.compared to TL3-LA at 34.8 ounces.


Retail pricing:
Short action: $1800
Medium action: $1900
Long action: $1900

Please email [email protected] for availability.

Discontinued Springfield Armory M1A Super Match 7.62 rifle. They don't make these anymore, so future collector piece especially these supermatch model.


In great condition about 50 rounds thru the barrel. Comes with SA Scope mount.

Stainless steel match barrel
2 stage match trigger
Match front and rear sight
stock cheek raiser

comes with 2 - 10 round mags and 3 - 20 round mags Unsued.

Paypal FF only and ship in Cont. US only no international

$3250 shipped to your FFL now $2500

Have a manners TCS in Back in Black matte finish. Right Hand 700 SA. Has 6 weights total in the rail. Has the check riser knob and 4 flush cups (2 on each side). asking $1550 shipped.

This country is going down the tubes. First had to have an FFL to ship a firearm you legally own to another FFL via FedEx.

Today went to ship a firearm at UPS Customer Don't Care Center and was told no can do. Given the UPS phone number and could not connect to an operator so got nowhere. The Customer Don't Care Center mumbled something about needing to have a shipping label with RS in upper right corner. RS standing for Return Service. What bullshit since I am not returning anything just trying to ship a firearm I legally own for some gunsmithing. I will play the game if need to but do not want to rile the BATF.

Clever government ploy. At end of the tunnel will be just to own a firearm need an FFL.

Discuss. I was not able to watch the speech.

https://www.springfield-armory.com/1911-ds-series-handguns/1911-ds-prodigy-handguns/









MSRP of $1499

"The Prodigy™ from Springfield Armory takes the proven 1911 platform and enhances it with double-stack capacity and a performance-driven feature set. Reconfigured around a double-stack magazine, the Prodigy’s polymer grip module mounts to its forged steel frame offering capacities of 17+1 and 20+1. Optics ready with an ambidextrous safety and picatinny rail the Prodigy combines the most beloved characteristics of the 1911 with modern capacity for unrivaled performance."

Uses the Agency Arms AOS mounting system.
Has 17, 20 and 26 round mags available.

Mags have a $60 msrp

I'm personally very interested to check this out.

Hey guys,
I want to step-up a Glock 31 Gen 4 for a backup carry gun for hunting.

I need:

- night sights (bullet-proof, no red dot)
- slightly longer and bigger slide catch
- trigger tuning (w/o touching the function!)
- 2 holsters, 1 IWB, 1 OWB

What is the way to go?

Here we go........again.

They fucked up my order and I let the illegal alien driver know about it through their app. This is where things turned south. Apparently Door Dash frowns upon customers calling them and their drivers out for being Communist sacks of shit. Account canceled.

Oh well. I feel better now.

Buddy has a kkm threaded barrel that his dumbass didn’t take out the set screw when he removed the comp, and trashed the threads. My question is would there be enough meat there to run a die on it, and be able to run a suppressor?

AIAX Stock In Sage Green.
Anarchy outdoors low profile cheek rest included.
$850 shipped!
PP ok

Selling my Bighorn Origin barreled action. Please see prices for each below:

- Zermatt Arms Origin (black nitride) w/Standard.308 boltface & competition bolt knob and 26" .308 win 1/10 twist 5r prefit savage small shank barrel (100 rounds) Heavy contour. $1350 shipped.

Insite arms heaten 4 port self timing muzzle break $110 shipped



Bundle deal $1400 to your ffl dealer with my driver license copy

Thanks for looking

PayPal f&f or goods and services with %3 fee(buyers pay)

Thanks for looking