Just wanted to show off the work Daniel did on my rifle over at Primal Finish in TN. I’ve had this idea for a few years and was foolishly going to attempt it myself at one point. I’m glad I hesitated and put it in the hands of a true master. This rifle is my baby, the gun I started shooting long range with almost 15 years ago. It started out as a 700P 5R that 15 years ago seemed to be the go to starter rifle for long range. I shot the original barrel out after a couple of years then did a complete rebuild off the action. Action squared & trued, PTG bolt, Krieger 1-10” barrel, Manners T4A, and bedded by my gunsmith. Gun shoots fantastic and routinely make 1st round hits to almost 1200 with Berger 185’s. Killed many deer with this gun. Only thing it’s been lacking is a proper paint job deserving of this awesome gun. I can’t say enough about the quality of work over at Primal. This is the 3rd rifle he’s done for me and has knocked them all out of the park. Anyway if you have been considering getting a gun painted, have a conversation with Daniel. His work speaks for itself but I can personally say he’s been a pleasure to deal with.



www.primalfinish.com

Got bit by the inland small stream trout fishing bug, this is my 4th season.
I seem to catch a decent amount of Brookies, which are my favorite. My best is an 18" which is pretty decent for Wisco.
However until yesterday I was unable to crack the 20" plus mark on a Brown.
This guy had some good shoulders, cool blue cheek, and the start of a kype mouth. He was 24"+/-
I run solo so no great photo, but I snapped a pic, and got him back clean.
Fall is here so I hope to catch his dad, or fat mom.

Only the barreled action and trigger are left.

B14R action
IBI 1.125” straight, 22”, 1/12 twist
MPA matrix, custom cerakote
Internal chassis weights + externals shown
TT Diamond flat
3 magazines
Athlon Cronus BTR G2 APRS6, mil
Seekins rings

Rifles weighs 20lbs as shown. Balance point is about 2” in front of the magwell. I don’t think I even ever got 500 rounds through it. It punches a single hole at 50 yards with SK ammo as you’d expect.

BA must ship to your FFL of course.

BA + 3 mags + trigger: $1100 $1000
Optic and rings: $1150
Rings: $110

Just an FYI, @roperking posted a sale ad for LRH stocks @ $600 15 minutes ago and used the exact same image as @Redvanes.

I posted a pic of @Redvanes ad and asked WTF, seconds later the post disappeared…

Looking to sell Vudoo barreled action with polished 22" MTU Profile barrel, 30 MOA Rail, with Trigger Tech Diamond 2 stage and 1 mag.

$2000 shipped from my FFL to yours.

The first "I'll take it wins"

Howdy everyone. I had a case head separation today in my 300 win mag and it's got me stumped. Does anyone know what's up with these indentations on the shoulder? The load used has alway been fine and the shot that resulted in the separation felt, sounded, and hit like normal.

MPA BA comp chassis in a 700 short action
Chassis is in really good shape still, has some wear marks but nothing too bad.

$750 shipped to your door

Guys,

Is this even a question? At this point, I have a collection of LRTS/LRHS scopes and really like them for what they are. All but one are illuminated models.

Being that the XTRIII USA made are non illum, it's got me thinking whether it would make for a good upgrade. I do prefer illuminated reticles because I hunt with most of my rifles and nighttime hog hunting calls for it. However, this rifle does not get that kind of use.

Would going from the LRTS to the XTRIII be a big upgrade? Is the glass substantially better?
Looking forward to hear yalls thoughts!

For Sale: Used Foundation Centurion - $1100.00 Shipped
- Dark Distressed
- Impact 737r Inlet
- Hawkins M5 Bottom Metal
- Foundation Full Length ARCA Rail
- Right handed
- A few scratches from use but overall in great shape

PM with any questions.

Trades (+/- cash): impact 737r action, MDT ACC SA Folding, Razor HD LHT mil, .223 barreled actions, etc...

Asking $1100.00 - shipped PP F&F​

Super Smooth B14R Barreled Action with factory mag.

$650 shipped from my FFL to yours.

First I'll take it is what I'm going with.

I have a rem 5r 308 in mpa chassis I will sell whole gun or barreled action. Or trade for precision 22 build. 1600 for chassis and barreled action. 800 barreled action alone it’s black under krylon. Brake included either way.

Leupold 5-25x56 Mark 5 scope in mils with PR1 reticle and Griffin armament mount. Scope is in great condition and has been wrapped since new. $1500 shipped with mount, sunshade, and flip up caps.

For sale is a great condition Razor with EBR-2c reticle
has two spots of minor rub marks that can be seen in the pics.
Everything from the factory comes with it in box.
Seekins High rings are available as well but well cross that bridge when i have a sincere buyer first.
$1,500 shipped ,No Trades unless you want to do a partial trade on a Big Horn origin, ARC nucleus, Antix, Kelby Nanook all in short action. Selling to build a new custom hunting rifle in 6.5 creed for my brother so im not interested in unrelated trades that wont get me closer to completing the project.

Monkeypox I recon. Betopox.

So I've been researching and trying to find something that will fit my criteria for a .30 cal can. I have a Rugged Obsidian .45 already so I am covered on handgun suppression. So far I've been coming up dry with a good option for what I'm looking for.

My criteria:
-Option to direct thread for a bolt gun as well as having a QD mount option for AR's, etc.
-Stellite baffles
-User serviceable
-Ability to remove front of suppressor to make it into a "k" configuration
-Lightweight ~10 to 12 oz.

The usage for my suppressor would be as an all around rifle suppressor for use on rapid fire as well as being light enough to take hunting. Thus the reason why I'd like to make it into a k configuration for hunting. For hunting it would go on a 24" 6.5 creedmoor so that would also benefit by having a k length can.

The closest I've found to what I want is the SiCo Omega 36M. Cons are that it is not user serviceable and doesn't have satellite baffles. I also have no need for the pistol suppressing option.

I really like Rugged and their Radiant 762, but I don't believe you can direct thread it.

Does anyone have any good suggestions?

For those of you that have ate at a Hooters in Houston you may want to get a barf bag next to you when you read this.

In the article it was implied that the restaurant didn't conduct a background check. From looking at the photograph there are probably two reasons why.

Nevertheless, what looks like a sweet, demur and innocent young lady is actually a disgusting POS.

Another lesson learned is to always be nice to the people handling your food.

Ordered this prior to getting order confirmation on my 737T. Short action, 308 bolt face, with full top rail and DLC’d. Brand new in the box at my FFL. $1750 shipped.

Bought it at a estate sale with a lot of other crap I have to sort thru
whats it’s used for etc.

WWII bunker with fake air vent. Surprise, surprise.

Login to view embedded media

Rifle was built by Altus Shooting solutions

Impact 737R action 223 bolt
Brux Barrel 16.5” Rem Varmint contour 1:8 twist 5/8x24 threads 223 Wylde Chamber
MPA BA Comp chassis black
Trigger Tech Diamond trigger with flat trigger shoe
Area 419 hellfire brake
Atlas PSR bipod

I have several extra items for the MPA chassis. Short length of pull stock, extra cheek pads, action screws, magazine release. Comes with steel spigot mount, but still have the aluminum one as well.

I can include scope with or remove it for the sale. It’s a NF Atacr 4-20x50 T3 reticle with a 1 piece Spuhr mount

Rifle only has 60 rounds through it. I did the proper break in procedure for it and i was averaging .3-5 groups using Berger 77gr ammo. Probably could do better with a different shooter behind it.

The pictures i attached the .3 is Berger 77gr and the .4 is Federal Gold Medal 77gr

If you don’t want the bipod I’ll take $200 off price.

$3100 for rifle shipped
with scope $5400

$2100 for barreled action with trigger
$1900 barreled action without trigger



Paypal FF, Venmo or Zelle

Scope is new in unopened box. Specs on end label as pictured. I will pull scope out of box if BUYER needs to very any specs or condition. Otherwise not doing it for the curious.

2750 plus actual shipping and insurance.

PM for phone number to call and visit if needed.

ABSOLUTELY no trades.

Thanks

RTH

For sale Nightforce SHV 4-14 FFP mil reticle scope. Painted. Used very little. Illuminated reticle. Zero stop. Glass in perfect condition.Went with higher magnification, and have no need for this anymore. Comes with Badger Ordinance rings (30mm high, 306-09). $850 shipped to lower 48.