Looking to sell LabRadar.

Comes with the following:

- LabRadar /w Bluetooth
- Grey Ops 4-Way Arca Adapter
- Arkco Quad Base with Heavy Duty Swivel Head
- JKL Precision LabRadar Trigger Gen 2 with Magnet Mount
- MK Machining Pro Series Improved LabRadar Sight
- TCK LabRadar: Sandisk 16GB SD Card
- LabRadar Padded Case
- Anker Battery Pack with Cable

Looking for $500 shipped.

PayPal FF preferred.

I have seen a few Remington Walker 40x Military triggers around and they sell for a nice price. My question is do they sell for a premium because they are scarce and those who want to build an M40/M24 clone want to get original as possible or are these triggers as good as a jewell or other high end aftermarket triggers.

SITE HAS A 48 hour bump rule. Do not bump before then or post will be deleted and you will be banned.

I knew the thread in the “accessories” section wouldn’t make the night

But really what’s the deal? People are literally giving these things away

Selling my LabRadar (Bluetooth model) with accessories. Includes original box (not pictured), manuals, soft case, memory card, external battery, archery trigger, and tripod. Asking SOLD shipped. I take PayPal but cover fees and Venmo. Also I am interested in the following trades:

30 cal 1:10 twist barrel blanks from proof or bartlein. Needs to be M24 profile or similar. Feel free to ask any questions.

$400. SOLD

Venmo or Zelle are preferred (no fees), but I can do Paypal G&S if buyer covers fees.

Ships with soft carry case, original manual, and mini tripod as shown in the pic.

Trades:
- Aimpoint Duty RDS
- Aimpoint T2 + $200 Cash from Me
- Trijicon 3.25 MOA RMR Non-Adjustable Illumination + $100 from You
- Badger 34MM 20MOA FDE C1 + $175 from You

I have a Labradar with Bluetooth that I purchased new (original owner) for sale at $220 with shipping included in the US only. I have the original box, battery, USB cable , a JKL trigger and a aiming sight attached.

This is a brand new .300 Win Mag which I have not fired and I'm cleaning the bore.
Cleaning supplies:
Tipton one piece carbon fiber cleaning rod
Tipton .30 cal jag (Ultra jag set)
Dewey .30 / .32 cal no harm brass bore brush
Hoppe's #9 solvent
Patches cut from TX612 Texwipe 55% cellulose / 45% polyester clean room wipes
Pro Shot adjustable bore guide
Procedure:
1. Place patch on cleaning jag, advance into bore guide up to solvent slot, soak patch with solvent and run through bore.
2. Remove patch while still at muzzle end and pull cleaning rod back out.
3. Repeat until patch is clean (this has taken three passes each time).
4. Install bore brush on rod, wet brush and make 6 to 8 passes.
5. Start over at step 1.
Results:
Photo shows the patches from the first run to the last starting top to bottom. First patch ran through after bore brush from each run is on the left, second, then third. I don't seem to be making any headway after 15 cycles. Is this normal for a new gun and I just need to continue until first patch after the bore brush is clean? If not then how will I ever know if the bore is clean?

Login to view embedded media
Login to view embedded media
Login to view embedded media
So the theories are energy weapon being tested versus demonic forces vs. domino crowd effect (not buying the latter).

All brakes are used, the TMB and Hellfire Match probably have less than 500 rounds through them. The ACE brake was my favorite and has been ultrasonic cleaned and caused some slight discolration but nothing that affects the performance. All are 5/8-24 threads. All prices shipped

ACE 6mm $125
Hellfire Match 30 cal SOLD
TMB SOLD

Like new, comes with 4 Cutter head with blade and the following case holders
6 dasher
6 creedmoor
6 arc
260
223
7 saum

I will not part it out

$800 shipped

Ol' Jerry sets another World Record

Login to view embedded media

Keep it up....Karma is sitting there just waiting.

It sounds like they did her a favor. Boarded up for 15 years, now the company will have to remove the debris and pay her replacement cost. Gotta love the job foreman's response "Oops, wrong address, bye." Packs up and leaves with out a word.

Woman returns from vacation, finds Atlanta home demolished​

FOX 5 Atlanta
https://www.fox5atlanta.com › news › woman-returns-fr...



15 hours ago — It's an unforgivable accident. That's how one woman describes coming back from vacation to find a company accidentally leveled a home she owned.

Used zco mpct 3x in hawkins heavy tac rings. Idfts dry erase tape on elevation. Includes all accessories it came with. Also has sunshade and tenabrex caps.
$3250 shipped conus insured.
PayPal f&f or add fee
Venmo accepted as well.
I can pm pics

Brand new in the box never been mounted NF NX8 2.5-20x50 F1 Mil-xt reticle. 1600$ to your door.

Did you know that a magazine was a reinforced storehouse building designed to hold gunpowder?

A magazine is an item or place within which ammunition or other explosive material is stored. The word is taken originally from the Arabic word makhāzin(مخازن), meaning "storehouses.”





These storehouses were rather dangerous. On the rare occasion they would explode, leveling parts of a city and killing many, most notably in Delft, Holland.

The Delft Explosion, also known in history as the Delft Thunderclap, occurred on 12 October 1654 when a gunpowder store exploded, destroying much of the city. Over a hundred people were killed and thousands were injured.
Today, the explosion is primarily remembered for killing Rembrandt's most promising pupil, Carel Fabritius, and destroying almost all of his works.

Delft artist Egbert van der Poel painted several pictures of Delft showing the devastation.

Over 200 magazines and powder houses were built in New England, and about 50 remain.

We have a famous 300-year-old magazine still standing in Williamsburg, Virginia.




When black powder was superseded by smokeless powder, magazines became more like bunkers rather than storehouses and are used to hold cartridge ammunition and explosives.




The term has grown to mean any reinforced structure or container meant to safely house ammunition or explosives. Many companies offer magazines as small as a floor safe or as large as a mobile home.

LabRadar with bluetooth, used but in excellent condition. Case, external battery, SD card, new recoil trigger, and base all included.

$410 CONUS. Post here if you want it and then message me.

I am located in Louisville, CO.
I accept PayPal, Venmo, Zelle, and USPS MO (cash okay for FTF).
Not much feedback on these forums, but I have 400+ positive reviews on AR15.com under the same username.

Looking to sell some reloading-related equipment that I haven't been using (or haven't ever used). I have the following for sale:

1) MagnetoSpeed V3 w/ Wiser Precision mount (works with ARCA and picatinny). Excellent shape -- asking $325 shipped (the mount alone was $150 new) - SOLD
2) LabRadar w/ Bluetooth. Includes recoil trigger w/ picatinny and magnetic mounts, battery pack, tripod with ARCA head, ARCA mount for the unit, and sight. Asking $475 shipped - SOLD
3) 21st Century Neck Turning Lathe with carbide cutter, 33 cal and 30 cal arbors, 3M case holder+driver (for 338NM, 300NM), and #2 case holder+driver (for 308 Win, 6.5CM). Never used. Asking $200 shipped -- SOLD
4) AccuracyOne Concentricity gauge with Mitutoyo Indicator -- used once, otherwise like-new...just a little dusty. Asking $400 shipped - SOLD

If you have any questions about any of these items, please feel free to PM me.

This is a MS-V3 with Wiser mount that has served me well for years. I have the original box & accessories (never used & most likely dusty) that I’ll have to dig up. Has a few battle scars, but still works great.

I’ve been fortunate throughout my life/career to acquire more shooting related shit, than Carter has pills..(and yes, I picked up a new Garmin)

Must be able to pick up at Rio Salado (I live down the street) or Cowtown (shoot matches there twice a month), because I’m not shipping shit.

To qualify, you must post your sob story here…(for entertainment purposes)

Winner will be chosen by me, with juniors given high priority and likes on your posts a close 2nd.

Since I probably know a lot of the competitive shooters in the state, you swinging dicks (yes, I’m ex Navy) qualify also. But if I see this in the PX in the near future, you’ll be treated like the last elephant on earth by a mother with a house full of starving kids..

6GT build on an origin actions with a 26” proof research prefit. It is sitting in an MPA ESR chassis and topped with an Athlon Ares ETR 4.5-30x56 scope. Bipod NOT included . About 450rds down the tube. Whole package $3300 shipped. Will spilt scope and sell rifle for $2500 plus shipping and scope and for $950 shipped.

these are new prices, BUT the S3 is MOA- my pref is Mils, but I can make either work.
I've read a ton of threads ie:https://www.snipershide.com/shootin...3-6-36-vs-steiner-t6xi-5-30-opinions.7152089/, but most reference the S3 as being more expensive than the Steiner.
I'd like decent glass, I don't do much low light shooting, so would trade some glass clarity off against overall ease of use, turret quality etc. It'll be going on a 308 bolt shooting out to 600 and I'd like to see holes if feasible.

Thoughts ?

Before anyone says save up and extra $XXX and buy Y, this is me having saved up already....

Sold