Main themes: Universal background checks to be forced onto ALL gun sales, both vendor and private. ATF redefining rules to make private sellers, including those who are just selling one or a few guns out of their collections, also subject to ensure that purchasers get background checks.


----------
----------
President Joe Biden will announce the Office of Gun Violence Prevention on Friday and the new office will be coordinated with Mike Bloomberg gun control proponents and others.

According to the Washington Post, “The new office will report up through Stefanie Feldman, the White House staff secretary and a longtime Biden policy aide who has worked on the firearms issue for years.”

Coordination in the office is expected between the “White House, the Community Justice Action Fund and Everytown for Gun Safety.”

Shannon Watts, a Mike Bloomberg affiliate who founded Moms Demand Action, praised the creation of the Office of Gun Violence Prevention, saying, “If this announcement is, in fact, the creation of a single point of leadership on gun violence in the administration, it’s a very big deal for the movement.”

She added, “A governmental focal point dedicated to creating a framework for overseeing national policy, research and resources would be more than symbolic — it would be a significant turning point for the movement.”

On August 31, 2023, Breitbart News reported that Biden’s ATF was using executive rule to expand background checks to the point of nearly being universal.

In a press release that accompanied the announcement of the proposed rule, Attorney General Merrick Garland said:

“The Bipartisan Safer Communities Act was passed by Congress to reduce gun violence, including by expanding the background checks that keep guns out of the hands of criminals. This proposed rule implements Congress’s mandate to expand the definition of who must obtain a license and conduct a background check before selling firearms.”

The ATF’s rule will redefine language so that there is not simply a category of Americans buying and selling guns from and to one another — as they have done since 1791 — and a category of Federal Firearms Licensed holders (FFLs) selling guns at retail. Rather, every seller will have to prove he is not trying to make a profit, or he will be required to ensure the purchaser undergoes a background check before taking possession of the firearm.
----------
----------

Pinned seating depth by .0005 for 200 300WM. Yup, so easy they even let me do it!

Top Left to Bottom Right

1. Modtac - Suppressor Shield (U-RAC) 5in - $300 New

2. Leupold - Mark 6 1-6x20 CMR-W 5.56, M6C1 - $OLD Like New

3. Leupold - DeltaPoint Pro NV, Dark Earth - $380 Like New

4. Trijicon - RMR RM06 Type 2 - $OLD Like New

5. Geissele - URGI w/ BCG, P&W Surefire 4 Prong, DD 14.5 Barrel - $OLD ~300 round

6. Geissele - Mil-Spec Buffer Tube w/ Super 42, H1 - $OLD New Tube, Used Buffer

7. LMT - Sopmod Stock, Black - $OLD New

8. LMT - Axle S/A Trigger Group - $OLD New, takeoff

9. Reptilia - CQC Grip, Louis Vuitton Engraved, Field Drab - $75 New

10. LMT - Ergo Pistol Grip Ambid Ambidextrous Suregrip - $50 New takeoff

11. LMT - AR-15 Flat Top Upper Receiver - $OLD New

12. DEMCO - Dogbone Mueller Upper - $200 New

13. Accuracy 1st - Scope Level 34mm, RAL 8000 - $OLD Like New

14. T.REX Arms - Leupold DeltaPoint Offset Mount - $OLD Used, Good

15. Nightforce - 34mm 1.00" Medium UltraLite A679, Dark Earth - $OLD Like New

16. Nightforce - RAP-I 34mm A688, Dark Earth - $OLD Like New

17. Area 419 - ARCALOCK Clamp - $OLD New

18. Ranger Wrap - Nightforce ATACR 7-35 Wrap, Coyote Brown Special Order - $45 New

19. Knights Armament - M-LOK Scout Light Mount - $70 New

20. Nightforce - ATACR 7-35x56 MIL-XT, Dark Earth, C661 - $OLD Like New

PM for more pics

Payment via Paypal F&F, Zelle, Venmo, or if you're in LA/OC, CA, we can meet up in person.

Has anyone found a way to send ejected brass to the rear more? I don't know if shortening the mechanical ejector somehow change the throw of the brass? Anywhere from 3-5 O'clock would be nice.

My first precision 22lr rifle was built by Ga Precision back in 2020. Had Mullerworks send them a 24” mtu blank in 1:12 twist. He was recommending 1:13 but i wanted 1:12. They got one done for me and sent to gap to be built on rimx action. Gap built full blown custom rifle that is a work of art. It never performed very well at 50 yards. Shoots most ammo between .3 and .4. Shoots around 1-1.25 at 100. But it out shoots all my other builds at distance. It shines at 250 and out. Just wonder if anyone else has shared same experience.

Since there is an invasion at the southern border should not the military or at the very least the national Guard be deployed to repel it?Why hasnt Abbott deployed the Texas guard yet or has he?

As the purge continues I have another gun that needs to hit the road.

Nemo Omen 300 WM:
- features a fluted bartlein match barrel (not a Draco) 1:8 twist 416SS threaded 5/8x24
- includes Nemo case
- (4) factory magazines
- Nemo blast shield muzzle device (similar to a forward concussion brake)
- Gieselle trigger

I don’t have the exact round count on this but via bore scope it’s not much. Maybe 300?

$3,500 shipped to your FFL

Thanks for the help all. I need some help picking a new can. I have a Nomad L and love it, but it is heavy. At the time of purchase in 2021 I was seriously considering the Nomad LT, but was scared of titanium. I now want a smaller, lighter can and have boiled the decision down to:

Stainless:

1. Nomad 30 - if you would have asked me 12 months ago, this is what I would have purchased and sort of compared everything to
2. Enticer S - Seems to be a great can at a great price, but don't love that it appears to be not as tough as the nomad based on firing schedules and barrel minimums

Titanium: I am not a huge mag dump guy, but still somewhat fearful of limitations in the future for classes, etc.

1. Nomad Ti
2. New Silencerco Scythe - Being all titanium, I am a bit scared of how it will hold up
3. Enticer S Ti

I suppose first I need to decide what material I want then decide on a can.

If titanium, which one will be the most rugged? I am planning on using the can on a 18" .308 an 8" 300 Blk and various full length 556

I definitely chase decibels (hints the Nomad Lt purchase), but now want something that performs well that is shorter and lighter.

This lightly used complete kit for sale $75 shipped

accept Zelle and Venmo

thanks

Does anyone know of a self-timing 4/5-port muzzle brake out there with straight ports and wrench flats..?

I've been running a 5-port Insite Arms Heathen (Gen 1) for the last couple of years and it's been great, very little blast back at the shooter while still reducing recoil, and no headache after shooting... except for me having to fight with a strap-wrench every time I install/uninstall it if I don't want it coming loose on me.

I haven't found a "self-timing" brake yet that will stay tight without having to use a strap-wrench to really get it torqued on there. I've seen just about every popular self-timing brake come loose at bad times, either on me, or other guys I've been in a squad with, this includes brakes from A419, APA, etc. That "hand tight" shit is bullshit.

So for my next brake, I want wrench flats or another solid way (besides a strap-wrench) to take it on and off and tighten it down.

Lastly, I don't want any more concussion back at the shooter than I'm used to with the Heathen (which is one of, if not, the best out there for that)... so that usually means brakes that incorporate some straight ports, the brakes with all the ports angled back at the shooter are completely out for me, I like my hearing and driving home without a headache after the match more than that extra few percent of recoil reduction thanks.

I was looking at the ACE brake, dig the hex at the muzzle (in leu of wrench flats), don't dig those tiny little hex screws on the collar, and not sure they'd hold up to the brake being torqued on and off over time?

Any ideas? Does anyone know of a brand/brake I'm not aware of or am overlooking..?

TIA

Folks- I have a tag I can’t use that I’ve donated through NMFG and they have reached out to Holy Pursuits and are looking to set a hunter up with it. As we are getting down to it I’m hoping to help get it processed by letting folks on here know and maybe a deserving person will see it or someone will know someone etc etc. Tag is Elk-3-159. I believe the process would be reach out to Holy Pursuits if you or someone you know is elligible.

300 pcs annealed with my AMP annealer and wet tumbled (Dawn, Lemishine, no pins)
300 pcs untouched after firing
$120 shipped per 300 or $225 for all of it.

So, like most people here are doing, you are carrying a folding knife as part of your regular EDC, right? Doesn't matter if they are passive swivel types, slick assisted openers, or automatics, they are simply the best choice for complete concealability.

Yeah, yeah, I get it. They have belt clips built into them. But the clips on many models, even high end knives, are not exactly reliable on the long run and I know many people who have lost knives and flashlights relying on the clip alone. One of my fellow contractors had his brand new Fenix PD35 TAC light wiggle loose from it's clip and drop over 3 stories from a rooftop HVAC unit we were working on and it's headcase shatter completely. He ordered a new one and I reminded him to get a Fenix hardshell holster for it as well. I actually gave him one of mine because I have a shitload of them and it doesn't hurt to have a few extras on standby... And clips still stand out and anybody trying really hard will notice that you are carrying a knife.

Pockets, especially dominant hand side pants pockets, are the best way to carry a folder for fast deployment if need be. But that presents it's own set of problems. One, a heavy duty folder continuously riding around in your pocket is going to wear a hole right through them after a while. And two, they are loose inside, which means they can settle horizontally into the bottom of your pocket and that makes reaching for it a bit awkward, especially if your work pants have just been freshly laundered and are a bit tight.

Well, that is not a problem anymore.

INTRODUCING: THE REVOLUTIONARY POCKET PROTECTOR. Nah, just kidding. It is just an ordinary faux-leather smartphone and passport/ID top opening wallet that you can get at any discount store. Remove any of the partitions inside normally set aside for IDs and such because you are not using it as an ID case, shear off any top straps if they have any. Then take one of those cheapo nylon drawstring bookbags, cut a nice big piece of fabric out of it, fold it up tight and press it into the bottom of the "holster" to beef up the bottom a bit, and now you got a perfect inside the pants pocket carrier for your heavy duty knife.



The carrier keeps your pockets from wearing out. No more ruined work pants.

The additional bulk of the carrier expands your pocket a bit, and makes reaching into it much easier too.

The added tension and smaller space in the carrier also keeps that folder upright all the time with the swivel end down. You can be assured that thing is always in the position for instant drawing.

And on top of all that, these things are cheap. If they get buffed up and worn to tatters over time, simply get a new one...

This is my SOG Seal XR, a beast of a folding combat knife, inside my ad hoc pocket carrier which is around $2.50 or so and takes about 2 minutes to modify.

#PocketLivesMatter

I was hoping the LRH could handle the straight 1.20 but I’m not sure if it can. Any recommendations for a lighter weight stock that can accommodate that heavy of a barrel?

Thank you!

New in box $SOLD shipped obo 700 sa/clones

ive had some pms asking if i didnt like it and not the case i had one for a little bit until a buddy bought the rifle off me and for my new build i picked this up while i waited for a manners to pop up that id be happy with (im a stock guy and a slut for carbon fiber)
Well i found a stock before my barrel came in so thats why this is up for grabs

I think for a "budget" end chassis its great sure doesnt have all the options of a mpa or mdt but its also half the price

For sale is a Package deal that is priced to move.

Included In the Package:

• Remington 700 AAC -SD Action (RR Serial Number)
• Nightforce 20MOA Rail Mount
• Northland Shooter Supply Improved Recoil Lug
• Criterion Rem-Age barrel Threaded 5/8x24
• Northland shooter Supply barrel tools: Action Wrench and RemAge collar wrench
• Cadex Strike Pro Chassis:
  • Vortex Stealth Shadow Color.
  • Folding butt stock
  • Adjustable: Length of Pull, Comb Height, Grip to Trigger, Mag Release
  • Cadex "Gas Peddle" Thumb Rest
• 2 x 10-Round AI Style Accu Magazines
• Single Round load "Sled"
• Area 418 Arca rail Attachement
• Atlas Bipod
• Atlas Mono-Pod
• Two factory Remington barrels 20" 308 & 22" 6.5 CM

I know I am leaving out a ton of information, so please do not hesitate to contact me with questions.

$2300 shipped to your FFL, everything else to your door

No Trades - Thanks

Gen 2 H59 razor for sale. Has a lil rash on the turrets but nothing serious. you can see it in the pics. Comes with ARC med rings and throw lever. Will ship in original box. PP F&F or you pay the fees. No notes or Personal check and wait till it clears. $1700 shipped

Bought this upper from another hide member here. It got a WOA 18" SPR barrel, BCM quad rail, Bushmaster upper w/ BCG/CH, and a superlative adjustable gas block. It needs a brake/flush hider. Round count <700 by its original owner. I took it on one range trip and it's a good shooter. The collar on the barrel is a look-alike, not the original Allen Engineering collar. I spray-painted the front part of the barrel and the rail panels due to some paint scratch so the color is slightly mismatched. Selling things I don't regularly shoot, and hope someone can find a good use of this upper.

$500 $450 shipped.

Excellent condition. Used at the range a few times

$2000 shipped

Kestrel 5700 with Applied Ballistics and link.

Purchased direct from Kestrel last year. Has one small scratch from dropping it (see pictures), but works like new.

$350 shipped

I accept Zelle and USPS money order. Please feel free to message me for my number if you have any questions.

Looking for a new mat. I own the tab gear one that is nothing more than a glorified tarp and not that comfortable on hard ground. I also have the tactical tailor one that is so comfortable I could sleep on it but it’s too big to fit in my luggage when I travel.

Is there anything out there has some padding but is still compressible enough to fit in a suitcase/pelican?

Looking to sell as a pair. I have duplicates of these so no need for the extras anymore.

$75 shipped for both.

September 19, 2023.
Tennessee Colony, Texas.

Billy Chemirmir, a prolific serial killer in the Dallas area, was serving a life sentence without parole at the Coffield Unit Prison 2661 FM2054 when he was beaten and stabbed to death by his cellmate after allegedly making sexual remarks about the man's children. After killing Chemirmir, the cellmate dragged the corpse out into the hall before going back into his cell and going to sleep.

Exclusively targeted elderly white women living alone or with few visitors.

An undocumented migrant from Kenya, 50 year old Billy Chemirmir had worked as a home health aide in the Dallas area and from 2016 to 2019, he murdered 22 elderly women by suffocating them to death with pillows, before stealing their jewelry and pawning it off. One 91 year old woman survived an attack from Chemirmir and was able to provide crucial information leading to Chemirmir's capture. Chemirmir's trial, which started in 2021, was marked with delays and interruptions as two Soros backed progressive DAs, John Creuzot of Dallas and Greg Willis of Collin County, initially refused to indict Chemirmir on any of the murders despite overwhelming evidence, and later, blocking the death penalty from being given to Chemirmir after the indictment on two counts of capital murder. The final trial in 2022 saw Chemirmir indicted on all counts of capital murder and he was sentenced to life with no possibility of parole.

Billy Chemirmir, 50, was beaten and stabbed to death at Coffield Unit Prison in TN Colony, Texas, after making inappropriate remarks about his cellmate's children:



Chemirmir's victims:



ARTICLE:


----------
Following his second conviction, family members of those Chemirmir was accused of killing gathered at a Dallas courthouse to face him. In Ellen French House’s victim impact statement, she told Chemirmir that she wanted him to see two photos of her mother: one of Norma French alive, the other after the 85-year-old was killed.

“This is my beautiful mother,” House said as she displayed the first photo. “This is my mother after you pried her wedding ring off of her finger that she couldn’t even get off.”
----------

Serious enquiries only...

I have two (2) Suppressed Tac Ops Delta 51's ready to ship. These rifles are the exact platforms the Los Angeles County Sheriff's Department Special Enforcement Bureau deploys...

Pm me here if interested

Thank you

Mike R