Hey guys, I’ve been commissioned to do a flag for a retired US Navy Airman. I’ve done all the branches except the Navy. When I looked up the US Navy seal, I’m getting these two:



Which one is appropriate? And feel free to educate me, were these used during different time periods? Are they both still in service? What is appropriate on a flag? This gentleman got out in 1994.

For reference, here is an example of one I did for a couple US ARMY members.



Thanks for any guidance, I want this to be perfectly correct.

ZCO 5-27 in like new condition with original box, all paperwork, bikini cover etc. MPCT2 reticle - SOLD

1.18” spuhr mount 36mm - $250

ATACR 5-25 MOAR SFP I prefer MOA and SFP for hunting, most other hunters use MOA and SFP is really nice for low light low magnification shots. I would not recommend it for a competition scope - SOLD

Nightforce ultralight 34mm low rings with top bubble ring - $

ATACR 4-16x42 MOAR F1, king of SPR scopes, comes with tenebraex ocular lens cover and stock NF (not sure who makes it) objective lens cover - SOLD

I don’t have any seller reviews on here as I’m new to the hide but I have almost 70 positive reviews on GAFS on reddit including some high dollar scopes and NV if you need credentials send me your reddit username and I can message you over there.

As new.
I think the Armageddon is a Shmedium weighs more than 7lbs
TAB rear bag and Surgeon cap

This guy, and senior naval staff, felt Pearl was too vulnerable ,but they were all ignored and over ridden by Roosevelt. A few months later...boom. I'm not a historian on this but it seems plausible.

James O. Richardson​

Wikipedia
https://en.wikipedia.org › wiki › James_O._Richardson




James Otto Richardson (18 September 1878 – 2 May 1974) was an admiral in the United States Navy who served from 1902 to 1947.
‎Early life and career · ‎World War I and interwar years · ‎Pearl Harbor and aftermath

Looking at a low recoil rig for the wife. Right now she is shooting a .308 but she says the recoil is bothersome... And she is getting ready to have a procedure done on her right shoulder. She won't be behind a rifle anytime soon, but she said she would like a lighter recoiling rifle for when she is able to resume shooting. We will probably keep her .308 as a hunting/backup rig. But she wants something that she will enjoy shooting "all day."

1000 yards is about as far as she'll ever get out to.

I'm a 30 cal guy and specifically magnums... So I'm just not familiar with the smaller, lighter-recoiling calibers.

I checked out the CM calibers, both 6 & 6.5. Looks like I can get brass for both... At least right now. Haven't checked on projectiles yet but I assume getting either one shouldn't be too impossible.

I also looked at 6 Dasher and brass was available but not as plentiful as the CM varieties... And I know very little about it anyway. And I didn't find many options for it in "off the shelf" rifles to boot. Not sure she is ready/willing for a custom precision build either.

Any other chamberings you all recommend I look at? (Preferably in a "factory" rifle)

Mike

Up for grabs is a new unfired by me AI AXSA 6.5 Creedmoor in dark earth with a 24” barrel. Purchased this new from Euro Optic late last year and just simply haven’t had time to get out and shoot. Optic is a ZCO 5-27x56 with the MPCT-3X reticle mounted in an ARC M-brace, all purchased new from CS Tactical. I will include the MDT Send It level with the package. Rifle and scope will be shipped in their original boxes. Looking to get $10,450 $9850 shipped to your FFL for everything. Price for just the rifle is $7100 $6750. Price for the optic/mount is $3500 $3250. Not looking for any trades.

I visited Dead Zero Shooting Park in Spencer Tennessee today. This is the nicest range I have ever shot at. I highly recommend this place for anyone who is in the area.
The staff is friendly and knowledgeable.

They have 7 pistol ranges, shotgun ranges, and a 100-1,000y rifle range with steel and electronic targets.

We shot the 100-1,000y range.
You are provided a tablet which is linked to your targets.
Before shooting at the electronic target you must shoot 1 shot on the steel target at the equivalent range. This is to prevent you shooting the sensors on the electronic target.

I was shooting my Ultimatum Deadline in 6.5 Creedmoor in an MDT ACC chassis topped with a Tangent Theta TT525P.

I was shooting hand loaded ammo out to 600Y.
I was at 0.2MOA after 4 shots at 600y but of course I screwed it up on the 5th shot.


At 800Y I kept everything in the 10 or X-ring for a .74MOA

At 1,000y I had 3 groups in the 0.6MOA range with this one all being in the 10 or X-ring.

I was shooting Hornady Match 147 ELD-M, FGMM with Sierra 140gr SMK’s, and Sierra branded ammo loaded with 140gr SMK’s.

Need help,
I need a couple of these signs, where can find them?

Tried it, and it's not for me. Brand new condition. $70 EDIT: It's for 6BR and similar cartridges

I’ll make sure she has a nice cool place to spend the winter. Free from parasites and predators

SPF******************


As above, in excellent condition with box, manual, sunshade, tools, etc, and one cap for the objective. $1400 insured TYD CONUS

Will accept Paypal F&F or + 4% or PO Money Order, cash.

Rifle, ARC low rings, ARMS mount not included. Will include the rings for $150

The turret cover caps are a bit dinged up (use a nickel not a screwdriver) but I have a new pair already shipped and will be included.

First "I'll take it." here trumps PM. No trades at this time, thanks for looking.

Price Drop & Items Added! Upgraded some optics so now it's time to clean out the safe!

• All scopes used but not abused - first "I'll take it" post gets it, feel free to PM with offers.
• FREE shipping (CONUS). Face to face available in the Bryan/College Station Texas area.
• PayPal Friends & Family or Venmo – if you want to use the buyer protection option that’s fine but you’ll cover the fee.
• More pictures for any item available on request.
• Open to trades for Spuhr +/- cash for a Spuhr ST-4701, Leupold 1x prismatic scope, or possibly weapon mounted thermals

Vortex Viper PST II 5-25X50 FFP MRAD EBR-7
$925 $850 Includes box & sunshade

SOLD Vortex Razor HD LHT 3-15x42 SFP MRAD HSR-5i
$825 Includes box & sunshade - does NOT include scope caps, throw lever, rings, etc.

Vortex Diamondback 4-16x44 FFP MRAD EBR-2C
$300 $275 $250 Includes box & sunshade,

Vortex Viper PST 6-24X50 FFP MRAD EBR-1
$675 $600 $550 Includes Butler Creek caps – no box

Vortex Viper PST 2.5-10X32 FFP MRAD EBR-1
$700 600 $550 Includes Butler Creek caps – no box

Leupold VX-R Patrol Rifle Scope 30mm Tube 4-12x 40mm Illuminated FireDot-Green TMR Reticle
$725 $700 Includes weaver med rings & butler creek caps – no box

Spuhr ST-3701 – 30mm, fits Tikka
$375 $325 With box & level tool

LaRue LT-111 OBR 30mm mount
$350 $300 $275 No box

LaRue .750 gas block with flange
$50 No box

Switchview 1650SV2 fits Schmidt & Bender Short Dot 1.1-4×20, 1.5-6×20, 5×25 model scopes and Zeiss Compact Victory (Not Diavari) model scopes
$30 $35 New in box

MDT .224 Valkyrie 8 round AICS magazine
$35 $30 New in bag

Magpul PRS Lite (Black)
$90 $80 No box

CZ 527 1” Aluminium Rings (16mm dovetail)
$40 In box

Go read the rules before you post again as you do this again you will be banned.

Are these a thing? I know it would be a PITA, but with a QD can it could be doable.

I just picked up a CVA paramount htr .45 and put a brake on it. Got me thinking about something like a Hybrid 46.

Took this bag in on a trade and just don't need it. No idea what brand it is? Open to reasonable offers.

Price needs to be listed per site rules.

post up your gripes with a product , what do think needs to change with something that's 90% perfect but just needs that little extra to be perfect . let us know

Looking to move an impact 737. At my ffl now for shipment. Looks damn near new

I'm not sure if decent is the word I should use?

What's the norms, not the poors and not the richs, somewhere in between use for spotting hits for PRS?

I'm not even really sure what my budget should be for these. I do know I definitely want binoculars, not a spotting scope. I'd like to see the bullet trace and hits out to 1300 yards or more.

Thanks guys

Brandon Johnson at his finest:

"We don’t want our story to be told that we were unable to house the unhoused or provide safe harbor for those who are seeking refuge here. Because there’s enough room for everyone in the city of Chicago, whether you are seeking asylum or you are looking for a fully funded neighborhood," Johnson said in May.

Message to Texas, please keep sending the invaders north to Chicago, there’s plenty of room in the city on the south and west side . The funny thing is, that all these residents who are angry, voted for both Brandons and would likely do it again despite all the personal suffering they are experiencing as a result of it. I want to fly small plane towing a sign saying, “You voted for this are happy now” over the south and west side neighborhoods, but it would probably get shot down.

Just wait until it gets cold this winter. Liberals love to ignore laws when it suits their purposes for getting more voters, but they have no clue how to contain nor manage the humanitarian crisis they are creating within our boarders by ignoring our immigration law.

I bought this able 3 months ago, going a different route focusing on other things in life. Selling a lot of my high end reloading equipment.
$1000 shipped to you
$1150 shipped to you with the 7/8 turret head and also a brand new hybrid half 7/8-half 1 1/4 head. It will include all original packaging and box, no the dies are not included.

Prefer PayPal, as friends and family for payment. May be able to do Venmo aswell.

Login to view embedded media
I’ve posted on this shit hole in NM before and it looks like it maybe in the running for most corrupt in the nation - ALL convictions thrown out and prisoners released - truly guilty a long with the truly innocent. But so far no arrests have been made amongst the Stasi that falsely fined and imprisoned with impunity.

Bought it brand new a few months ago. I trimmer 100 pieces of 300 norma brass with it and it’s sat since then. Focusing on my racing schedule and no time to shoot. My loss, your gain. All the other cutter heads are brand new still. I’ll ship them in the small tackle box I have them sorted in.

This comes with the optional bin kit
6.5 cutter
6mm cutter
338 cutter
30 cal cutter
Collet 1
Collet 4

$825 shipped to you
I prefer PayPal friends or family.
Check out my other listings, I’m somewhat cleaning a lot of stuff out I don’t use and it’s all top notch.

Like new hardly used. Have all the parts and original packaging. Selling some reloading equipment, focusing on my racing schedule. My loss your gain

600$ shipped to you
Prefer PayPal friends or family
Thanks

I don’t have a very good picture of it I can when I get home from work. This is all I could find from putting a bench together.