So I've been dreaming of a 300 Norma or 300 PRC. I have put together a 243 with a Criterion remage barrel and it shoots fantastic. Looking to do a higher end build next, probably over the next 2 years. I have access to shoot a mile or more and there are places that go further. Shooting at KO2M would be pretty sweet, just to get to try it out. Problem is shooting it would be super expensive so really a few times a year? I am thinking swapping a bolt and spinning another barrel on and now I could shoot the hell out of it in 223 and maybe run some matches with it. Have the same stock/chassis, trigger, scope, bipod.... but shoot it for cheap and shoot it a lot. But will 223 feed in a long action? Does anybody make mags that look like a Bergara or Voodoo 2 mag that puts 223 in a long action?

Sold- 1 Mini Range Cube- 20 plus shipping
2 Flat bags- 15 each plus shipping

Venmo or PayPal only

Browning Travel Vault, made by Pelican. I have owned this case for quite some time, it has traveled some miles all over with me (hence the tape residue from labels). It's in very good condition. Measures: 50"X5"X15"
$165 shipped or $100 face to face in Maine
Sold Pending Funds
Next up is a cheap US Peacekeeper drag bag, it's 54" long. The large exterior pocket has about a 6" long section at the top of the pocket where it's started to tear away from the main bag (see picture) I used to pack this thing full and tote it all over. It's a pretty rugged bag.
SPF $75 shipped SPF

The Left wants a civil war soooo bad and they're already blaming you for starting it.

Selling my ZCO 840 MPCT 1. Excellent condition (was mounted and never taken to the range). Someone needs to give this thing the attention it deserves!

$SOLD shipped, insured

No trades

Oh boy, what a trainwreck

Login to view embedded media

RR coded Rem 700 SA with 223 bolt face. Bought this about 1-1/2- 2 years ago and had a 350 legend barrel on it, maybe shot 150 rounds. Bolt shows blueing loss from cycling. Has NF 40moa steel base and PTG .200 recoil lug. Factory trigger, bolt handle was threaded and there is a temp knob on it that I spun up on the lathe one day. Must ship to FFL and they just accept from individual. Asking 460 shipped PP F&F, USPS MO, or FTF if close enough.

Selling my lightly used SB PMII 3-20x50 ultra short with MSR2 reticle (.5 cm cw MTII MTC LT / DTII+ZC LT). Comes with all paperwork, lens covers, original box. The scope is in excellent condition.

SOLD

Not interested in trades right now.

Anyone running a 16”-18” 6 creed? What kind of velocity are you getting?

Thanks

I am currently in the process of building a DMR/SPR rifle chambered in 6mm Arc. Current set up pictured below..
I am uncertain of what optic to go with. I am looking at either the ACTAR 4-16x42 Tremor 3 reticle and the Kahles 3-18x50 SKMR3 reticle with a SPUHR/ Badger condition one mount. I have ruled out the Leupold 3.6-18 because most people have told me it is not on the level of ACTAR and does not track as well.. I have read that Kahles are a bit more fragile and have a narrower FOV which concerns me, as this is the optics I am leaning towards. Obviously, ACTAR has the resume but it doesn't have the magnification of Kahles or Leupold. THoughts?


Specs
Geissele super duty upper/lower
Mk18 Arca handguard
JP VMOS bcg
JP silent cap spring
Geissele SSA-E trigger
Proof 18" carbon barrel with surefire socom break

Title says it all, good condition DMRII 3.5-21X50 with the G2 and a 25 yard parallax. Just a little rash on the turrets from normal use, 100% mechanical / tracks perfect as all Bushnell Elite Tactical scopes. I have owned at least 7 DMRs over the years and they are the most bomb proof scopes I have owned. When I was shooting a lot I kept a DMR in rings zeroed for my rifle as a backup in case my PMII went down (which happened a few times). I am selling to move to a lighter scope on this RimX.
I can get you all the pics you want, but more will be added later today.
I would consider a trade for a Sightron SIII PLR illuminated 6-24 MIL, or maybe a Vortex LHT 4.5-22 MIL (with some cash on my end)
Sold pending funds $750 shipped without the rings

Have to stop for some cash in Lexington first……Say hello to Captain Parker!

200 rounds of Hornady 6.5 Creedmoor ELD Match. Mixed lot (3 total lots 5, 3 and 2)

$325 shipped ff

Lone peak Fuzion SA 308 BF Barreled action (stock is sold)

Chambered in 6.5 Creedmoor by Travis at TS Customs with a .175” fb 26” Benchmark MTU+ threaded 5/8x24”
Shoots both handloads and factory 140g eld easily sub 1/2 minute and in the 1/4’s if you do your part.

Several groups included in pics
5 shot group at 1100yds on the IPSC
(Handload info available to buyer)

Area 419 hellfire match 6.5 brake
Triggertech Diamond flat single stage

150rds documented rds down the tube.

2500$ shipped for BA complete with trigger/brake
2150$ shipped for BA minus trigger/brake

F--KING RINO SCUM RYAN and MC CARTHY... playing games. EXPOSE THEM. SHARE

Looking to sell complete package, no components available for sale separately. Prefer a deal in DFW, TX but will work out fair shipping and insurance at cost.

$2175

-Tikka T3X blued receiver with SA bolt stop MT 20MOA rail Elay trigger spring 1.25lb
-.473" bolt face with CTR knob
-Patriot Valley Arms shouldered pre-fit Rock Creek 1:8" twist blank 26" Proof Competition contour barrel chambered in 6.5CM standard freebore specs 5/8-24 threaded muzzle with thread protector painted OD with Alumahyde
-Area 419 Hellfire 6.5 cal brake with 5/8-24 mount nitride black
-KRG Whiskey 3 Gen 3 folding chassis aluminum forend steel heavy bag rider overmolded cheek piece spigot mount and NV bridge
-Atlas V8 BT10 LW17 bipod
-ARC 10 round mag
-Nightforce SHV 4-14x50 F1 illuminated Mil-R with Spuhr SP-3601 1.18" 20MOA cant 5-screw revision mount AADMOUNT ocular and objective caps Accuracy 1st ACD Switchview PTL McNett wrap
-Troy battle sling with QD's
-Armageddon Gear 52" precision rifle case

Has not been fired in this configuration, barrel has 300 rounds on it, all fasteners torqued to spec and properly headspaced. 17 lbs with unloaded mag.

Photo Album

I try to be good about cleaning my Begara B-14 6.5CM after each day of shooting. I clean with Hopps mostly.

I've noticed that the bolt is getting these two spots and my normal cleaning routine isn't removing them. It did only have one spot for a bunch of months and now I'm seeing two...meaning whatever is happening is still happening and I'm not removing them.

What is it and how can I remove it?

18” White Oak Armament SPR barrel. Roughly 100 rounds on the barrel.

Aero upper and Aero 15” MLOK handguard.

Radian Ambi charging handle.

Adjustable gas block.

Nickel Boron BCG.

Random muzzle device on it.

Razor 1-6 JM-1 BDC reticle with a random mount that was laying around.

Scope body has some scratches but the glass is clean.

SOLD.

I can’t decide between a Howa or tikka. I would like a stainless barrel not too long and not to short about 22 or 24inch. Want to do a bit of target and hunting if I get a chance and you tell me the pros and cons of each rifle. Thanks

I bought this amp and amp mate. It was working great. Had it running over in the corner and this happened. Case some how came loose from shell holder. Burnt the case up worse then aztec analysis mode and basically destroyed the inner protective plastic.

This really sucks! Plastic melted down into the ceramic bowl.


Now that I think of it, I don't really know why plastic is anywhere near the heating source. I am hoping they take care of it. Preferably send replacement parts and ill do it myself. I just sent him an email tonight. What do you think?

Does anyone know about military 6.5 rifles and ammo?

Hey all,

Do we have any c6 vette fans here?

I am currently shopping around for one and was wondering if anyone had any idea what the market is like for these Lil cars.

The one I liked the most is a jet stream blue 2008 Z51. Anybody have anything to say about these such as what you like or dislike on yours? The one I'm after will run me $30,000 already transferred to my name with only 76,000 miles and 3 owners. I think the asking price is high but idk. I just barely started looking into these a week ago so I'm barely feeling the marker out.

Started going to a range and shooting off the bench. I feel like I would benefit from a 0 degree grip to help with my consistency and so on. Does anyone know who makes one? Anyone have experience with them? How do they work for you, and do you like them?

Thanks fellas.