Another fucking mass shooter, this time in Phoenix.

Login to view embedded media

It's getting close to the point that if I see someone walking around kitted out like him, I'll likely just shoot first and worry about asking questions later.

Otherwise, they get out of line.

I keep white people "under my thumbs" or else "they get out of control."
"My district is slightly Republican, and it's heavily white. I'm no stranger to white people; I'm from a mostly white town. And let me tell you one thing. You oughta know who you're dealing with, like you gotta treat them like s***, like I mean that's the only way they'll respect you."

Mm-mm, 'das right.

Sellingt a Tikka T3X in like new condition. 20 rounds have been fired thru it. Never hunted with. No longer have time to use it. Comes with box and accessories. Bipod not included. I have ammo available. $850.00 shipped.

Gen 1.5 Vudoo 16” Kukri
Timiny Calvin elite trigger
Manners MCS stock with quick adjustment upgrade knob
Arken EP-4 4-16x50mm
Arken halo rings
Arken throw lever
Arken bubble level
7 Mags - Vudoo
Action Bore Guide
419 Bolt Handle
419 Arca rail with barricade stop
wiebad stock pad
20moa base
490 rounds of Lapua Center-x
22 fake suppressor for training

About 800 rounds on the rifle. Was getting .50-.58 with Center-X

Asking: OBRO
$3,200 without scope and ring
$3,800 for everything shown and listed


Trades:
NVG’s with spec sheet
Open to other guns

I just had my appendix out. They got it before it burst, so that was good.

Any advice? I feel kinda weird and bloated right now after surgery.

Selling lightly used TCS-PRS Stock

Sage Flats (Green/Silver)
Dbl Dead Fill
4 Brass weights (3 Extra)
2 Rear Weights (1 Extra)
Wiebad Cheek Pad
MCS quick turn Riser/LOP knobs
R700 SA Inlet
Will include everything else that came with it new as well

$1525 Shipped PP FF CONUS
No trades and not looking to separate the weights

So I used to shoot exclusively a G19X with a DPP with 147 gr. I never worried about my POI because I've always just set my zero at 15 yards and it's hitting where I'm aiming.

Now I acquired a beautiful custom 9mm 1911 with traditional iron/fiber optic sights and even with a low 6 cloak hold, I'm hitting way way high (like a good 4-5in at 15 yards) the groups are fine and tight but the elevation is way too much and I even have adjustable sights and I've bottomed the adjustment and it's still way high, yet when I'm shooting 124gr, I'm dead on POA/POI.

Now I'm aware that there are poi shift when going from 124 to 147 but 5in at 15 yards is massive and I wonder if it could be me. I have really really really large hands and shoot strong hand thumbs over safety with support hand with the thumb riding the slide pointing forward. I also hook my support hand index finger around the trigger guard. I have good recoil control but I'm not sure what's causing this vertical difference beside the whole "subsonic bullets leaves slower therefore it gives more time the barrel to rise up".

I have 2 barrels on that specific 1911(including a very nice Kart custom fitted) and they both do the same.

Brand new Zeiss LRP S5 5-25x56 mil scope. Has never been mounted or anything. Phone call or anything else is welcome before purchase. $3000 TYD

Login to view embedded media
I am linking this to give context. This is the third break in of my home in five years. I have been keeping most of my firearms locked up in a safe and I keep a Glock 34 in my night stand. The HPD officer who responded said that once they enter your home, once they start shooting that I should defend myself to the best of my ability.

I am thinking the right answer is an SBR of some sort in 7.62 or maybe a 300 blackout? At this point I do not really care about the cost. Things are getting out of control and I am going to defend my home and family.

LOL so much goofy shit on here

Login to view embedded media
Login to view embedded media

We haven't named him yet, but we hope he gets feeling better. He's been pretty lethargic, and probably not gonna make it but were hopeful. He's been inside most of the evening resting on her finger aside from having a little honey.

Now that Im in Oklahoma I've had the chance to be around the bison and learned about them. I always thought bison and buffalo were the same or almost the same critter. Not so, and in fact the buffalo is not native to America. They are native to Africa, and Asia.

Buffalo.

The bison, however is native to the Americas.

Bison.



So where, you ask, is the anomaly?

William F Cody, aka 'Buffalo Bill' should have been 'Bison Bill'.

Buffalo Bob Smith (re" Howdy Doody) should have been 'Bison Bob Smith'.

The Buffalo Bills should be the 'Bison Bills'.

The Buffalo Soldiers should be the 'Bison soldiers'.

This could be game changing.

Fight Me.

Ok guys its time to sell the fix. No reason other than the fact ive got to many guns! Its got 2 proof barrels one in 6.5 and ones in 6 creed. The 6.5 barrel has just under 500 rounds and the 6 creed has under 400. Its got a full length saw tooth arca rail and a hoptic 2 round holder as well. This thing shoots lights out and was super easy to do load development for. Will ship to a ffl from a individual or if you in the montana area ill sure gladly meet you halfway. Does not come with the optic, bipod or suppressor. Asking 3400

Hey guys, you probably have noticed the volatile nature of the Steiner C35 prices/map etc recently. We decided to calm the seas a bit for them and purchased all (no more blems) of their remaining inventory through first quarter next yr. Not sure on future C35 plans after that but we have special pricing for you until these are all gone. Please enter the coupon code of "hide2022" during checkout. Steiner rebate of $250 remains in place currently so these are an incredible bargain.

These are live on website for purchase......expecting inventory to be available for shipping next week.

24” tikka varmint, 223. Threaded 5/8x24. 8 twist
Has less than 100 rounds on it and shoots 1/4” groups with my 77smk load.
Barrel has one small scratch, and the muzzle threads are good, but have hot lock residue on them, cleans off and brake will thread on no problem.
Also has CTR bolt handle and yodave trigger spring.
Edit:
2 mdt polymer 223 aics mags included

Sold . Barreled action only

Manners TCS Stock For Sale I’m Urban Camo.

Double Dead Fill
Sikes Rail
2 Rear Weights
Adjustable Arca with additional weights

Price: $1600 shipped

Will come with the factory 419 rail and not the 360 Precision shown

Love the scope, actually really nice for the size and weight. Just think I want to go with an atacr instead for this rifle.

1800 shipped.

I'll try and upload more pics tomorrow. Message with any questions 623.262.8620

This has been sitting in my closet for a few years. I've kept it around thinking I'd build something on it, but I don't see that happening anytime soon. Stock has never been shot in competition nor taken hunting. It was skim bedded for a 700 5R and includes a Picatinny rail to attach a bipod.

I also bought a 1" Decelerator recoil pad to complement the 1/2" stock pad. Both are included as well as the stock spacer kit to increase/decrease LOP. BDL bottom and varmint/sendero contour but can be opened up to MTU/M40/Competition contour.

Damn, these people have had enough. Prayers for all.

Uvalde shooting at Memorial Park: Police say 2 injured​

https://www.usatoday.com › news › nation › 2022/09/08



16 hours ago — Police in Uvalde, Texas, said they were responding to reports of an active shooting with injured victims at Uvalde Memorial Park.

For sale is a Ruger Precision Rifle (RPR) chambered in 6.5 Creedmoor. Round count on the barrel is ~2,200 and it was still shooting well when I moved the optic to a new build a while ago.

This rifle would make a good candidate to shoot for a while and then drop in a prefit of your choice.

Price is $750 shipped to your FFL, I can also meet FTF in the Huntsville, AL area.

Trade interests: Zermatt Origin action or Stainless Tikkas, especially in .223 or .300 WSM.

I have one Harris bipod 1A2 BRM. Looking to get $60 for it. Also have the two American defense quick attach still for sale. $60 each

All atlas bipods ***SOLD***

I have one McMillan A-5 adjustable cheek piece. Remington 700 footprint.sendero barrel channel. Area 419 Picatinny rail. $500 obo*SOLD*

Manners T4 Remington 700 footprint. Palma barrel channel. $450 *SOLD*

Grayboe ridgeback. Sendero barrel channel. Rem 700 footprint. Questions about this stock pm me. $300. *SOLD*

A woman was beheaded by a sword-wielding assailant on a residential street in the Silicon Valley town of San Carlos, California, on Thursday in front of horrified onlookers. The man was later arrested, with police receiving counseling.

NBC Bay Area reported:

A woman’s head was severed with a sword in San Carlos Thursday, authorities with knowledge of the investigation told NBC Bay Area’s Investigative Unit.
The suspect, who returned to the scene, was arrested in connection with the woman’s death, according to the San Mateo County Sheriff’s Office. The suspect was later identified as Jose Landaeta Solano.
Deputies near the intersection of Laurel Street and Magnolia Avenue were flagged down at about 11:50 a.m. by witnesses who reported an assault in progress, the sheriff’s office said. When deputies arrived at the scene, they found the woman dead.

Click to expand...

Local ABC News 7 added:

During a press conference, Lieutenant Eamon Allen said that the crime happened in the street outside the victim’s residence.
Lieutenant Allen said that the victim had two children, who did not witness the crime, and sources tell the I-Team’s Dan Noyes the kids were inside the house at the time.
…
We’re told the two were in an ongoing relationship but law enforcement sources say the victim got a temporary restraining order against the suspect, Hayward resident Jose Solano Landaeta, in April.

Click to expand...

The San Francisco Chronicle noted that police and witnesses, some of whom were distraught, had been provided with counseling.

Police said Thursday evening that they were still working to recover the murder weapon.


Bet he's out on bail tomorrow morning.

Hello,

Selling a few optics that I just having laying around. All prices include shipping and are o.b.o.

Aimpoint NANO with High Mount = $425
Aimpoint CompM4s = SOLD
EOTech 552 EOLAD 1 (Green Visible Laser) = $675
Trijicon ACOG® 4x32 LED Riflescope - .223 / 5.56 BDC with RMR Type 2 (TA02-C-100564) = SOLD

Relatively new to rimfire and very new to CZ 457 aftermarket barrels.

This Lothar-Walther aftermarket barrel shoots better than my stock 16", no keyholes.
To prep for an upcoming match, I was going to cleaning my chamber and look for carbon ring, so I popped in my newly acquired bore scope.
To my surprise, it was hard to find any rifling, at least compared to the CZ, Ruger, and Kidd barrels.

For the more experienced, what am I looking at? Is this polygonal rifling, a manufacturer defect, or are the rifling worn out/damaged?
I've done very minimal cleaning initially, no copper or steel brush, just nylon brush and a few patches with Boretech Rimfire Blend down the barrel with an .17" Tipton rod and plastic eyelet.

Thank you for your advice and help in advance.

Photo 1. Carbon ring and leade
Photo 2. Best shot of the rifling I could get
Photo 3. Crown

Read on another forum that the Oathkeepers' membership was leaked, possibly by ADL?. The post was taken down, however. Anyone have details?