EOTECH ClipIR-ELR Mk2 for sale. Aside from turning it on once it has stayed in it's hard case, and is in unused condition. These units will come with the hard case and manuals that came from the factory. Happily willing to FaceTime and serious buyers. This will ship next day, fully insured.


$11,599

This is posted over in the ELR section, but @CSTactical suggested I post it here - which makes sense, since this is an optical phenomenon.

Login to view embedded media

I should call out that the scope used on the rifle in this video is a ZCO purchased through CS Tactical.

One (1) Spot available for Magnolia Meltdown 2025.
Change in health plans forces sale.
$285.
PP F&F, Venmo, check.
***SOLD***

Im trying to id this camo pattern from manners
Any opinions?

Likely moving to Heber City UT and was surprised to see that the closest long distance range was 1.5 hours away in Perry.

Also noticed that the only PRS matches are North Utah and Central Utah - both about 2-3 hours away from Heber.

For those familiar with the area, is there any long distance shooting or matches closer than that? Or is there at least BLM land that’s safe to put out a target 500-1000yds where there’s not people shooting around you?

So I have 16" APC and and RC2 and shoot exclusively hot 175s. For some time now I have been using the KAC buffer (21057 4.5 OZ) and a Tubb flat wire. Now I am not saying my lube regime is correct - in fact, I am pretty sure it is a part of the problem, but I just slather some white grease on the worn areas of the BCG & bolt. Now it seems like I get @ 40 - 80 rounds before I get a one of those fun stoppages - fresh round is caught under the ejected round and it is all caught in the port and the fresh round usually is junked.

Now for the longest time I thought to myself if I just had a magic buffer and spring combo this fat pig could just keep chugging along without creating that bird's nest of shit in the port. I procured a 5.5 oz CAR buffer from Slash plus his spring; a new Tubb spring and no name H2 buffer; the 21057 + KAC spring. So I started out with my grease & the 21057 + Tubb. I think I made it @ 40 rounds or so before the first stoppage. I then left the gun dirty (maybe 60 rounds or so at this point) and started swapping out buffer and spring combos. To me the best was the no name H2 (which is perceptively heavier than the 21057) and the Tubb. None of them were 100%. Total stoppages with all combos and over @ 220 rounds was probably 8 or so. The 21057 & spring were not better than the 21057 + Tubb. The combo from Slash is interesting, the spring is the shortest of the 3 and feels about as stiff as the KAC spring. When shot it seems to exacerbate the feeling of a big freekin BCG sloshing around - like a brief delay before unlock, rapid coiling, a more noticeable secondary impulse over the Tubb, and then rapid uncoiling and bolt lock. The H2 + Tubb chugged along pretty good but was smoother throughout the impulse cycle. Gun runs great with no suppressor even when dirty.

How do you all lube? Is there a point where your large frame chokes?

Can’t remove the barrel from the action. I have custom made fixtures that fit the barrel and action. My understanding is it is right hand threads. The action turned approx 1/8th of a turn, but it did not loosen. Any thoughts?

I switched to the AB Quantum app with the calypso mini AB and instantly have shot 10% better in PRS. It feels like switching from DOS to Windows 11. If you don’t already own a kestrel 5700 Elite ($769) you can buy the Calypso mini an ($315 Walmart) and pay $29.99 a year for the Quantum pro app.

What am I missing here?

Guys,

Anyone out there have any load data for this combined with H1000? I've reached out to Barnes and haven't heard anything back. I have 8lbs of H1000 and a bunch of these, so hoping to get a load together

Thanks

These were sold as blems. If you have one you don't want, please DM me.

Smith & Wesson M&P 15-22 for sale
Aluminum free-float handguard
6 mags included
$345 OBO

Wholly Heck!

What an upstanding individual, a pillar of society!





Prosecutors in Colorado plan to drop charges against a registered sex offender accused of trying to kidnap a child from an elementary school because he was found incompetent to stand trial.

The 18th Judicial District Attorney’s Office, which covers Arapahoe County and includes Aurora and Littleton, informed FOX31 on Friday that it intends to dismiss charges against Solomon Galligan. The 33-year-old faces one count of attempted kidnapping after he allegedly tried to take an 11-year-old boy during recess at Black Forest Hills Elementary School in April 2024.

Aurora police previously reported that Galligan is a registered sex offender, with his registration tied to the Pueblo County Sheriff’s Office.

ACC Premier Gen 2 with the Elite grip. R700 SA RH. Used but in good working order. Magwell and ARCA sections shows use. Scratches under the bottom of the stock from setting the rifle down (used in NRL Hunter). Does not come in original box.

$675

View attachment IMG_4118.jpegView attachment IMG_4055.jpegView attachment IMG_4054.jpeg

No box for it but the scope is in good shape. There some minor little scuffs on the parallax knob but otherwise very clean.

$1150 shipped for the combo.
$1000 shipped if you just want the scope

No trades.

Who is the go to for custom large tenon barrels for the AI AXMC or AXSR? I know mile high sells prefits, but that's not what I'm looking for. My local smiths don't like chambering large tenon barrels and are never really willing.

More specifically, I'd love to do a carbon barrel in 25 Creedmoor. I contacted Proof Research about it, but never got a response.

Any help would be appreciated.

Bought this K624i in the PX a few years back and she is doing just fine. She has a few nicks from the previous owner's comp use and only used from a bench by me.
Selling to swap to a closer range scope setup.

Reticle: SKMR 3
LSW
No box
$old shipped.

Spuhr mount (SP 4001) is available only after scope sells. Diving board included with mount. $550 shipped

She showed her true colors again with the whole victimhood bullshit just like back during GamerGate when she was a Leftist.

Login to view embedded media

Sold is Vortex Fury HD 5000 laser range finding binoculars. Opened box and then sat in safe. Never used or taken outside. Perfect condition. Asking $sold shipped to conus. No trades at this time. Thanks for looking. Pictures are attached, can send more if needed.
View attachment IMG_9316.jpeg

$1200 skip the wait! Gorgeous red high gloss stock.

Stock only, rifle pic for example only.

RIGHT HANDED
Shell - ELITE HUNTER
Action - IMPACT PRECISION SA - MOVE INLET BACK .300 for shorter distance from hand to trigger
Trigger Guard - MCS-M5 SA MINI CHASSIS
Barrel Contour - BARTLEIN - M24
Butt Pad - 1/2 INCH PAD
Finish - OTHER MOLDED FINISH - 50% carbon, 50%Red from bloodshot, high gloss
Hardware - FLUSH CUP 2 LEFT
Hardware - LRH 3.5" ARCA RAIL

The PractiScore link is open now for the July 19th elr match at thunder valley. You still pay at the match no money due when you register.

Day match will be 5 Stage (10) target match for both light and heavy gun divisions. Light gun targets are from 1000 to 1800 yards and heavy gun targets from 1700 yards to 2445 yards. Price is $250 per division. On PractiScore make sure you sign up for the light or heavy gun division. Search thunder valley elr under Matches. top 3 trophies and payout in each division.

Night match will pay winner and a trophy to each division. Gonna try and have some cool t-shirts for the night match. Limited to 20 shooters for light and heavy in the night match and shooters registered for the day match have 1st dibs on night match. Night match will be $150 entry fee. It will be 3 target (3) of the same targets we used in the daylight. Out to a mile you will get 3 shots at each but only if you need them in other words you can clean the night match with 3 rounds or use as many as 9 total. It will be one stage 3 targets 5 min par time match will start at 9:30 pm.


Concessions will be available at the range all day. Suppressor rental will be available but please let us know if you need to rent a suppressor so we can verify we have thread pitch you need and it will be first come first serve on the suppressors we only have a few we can rent out.

Location is thunder valley precision in kimbolton Ohio.

cleaning out the gun safe.

What started as a complete upper 6.5cm 22”, added an LT10 lower that I built out with all Larue parts with the exception of the safety and Magpul PRS lite buttstock.
Would include the arca rail for an additional $100

Rifle has less than 400rds on it.

Asking $2600 w/o arca rail

For sale is my LMT MWS quad rail

I am the original owner. Original box, manual, buttstock, and iron sights included.

308 barrel 700rds +\- 50
1:11.25 twist
20” stainless steel

6.5cm barrel unfired
1:8 twist
20” stainless steel

Asking $3100 complete
$2600 with just one barrel

Aero Precision FDE lower. BCM MK2 buffer system(same as the Vltor A5) Geissele trigger. B5 grip and B5 Sopmod stock. $400 shipped or best offer.