Sig Sauer KILO 8K-ABS Rangefinder - Lightly used and in excellent condition. Comes with original box and all included accessories.

Purchased brand new by myself. Lenses are free of scratches and the body is in excellent condition.

Has Applied Ballistics software onboard that can be used through an app, eliminating the need to purchase a Kestrel.

$SOLD

Zelle preferred - Venmo - PayPal F&F - CashApp accepted. Not looking for trades of any kind.

In 2017 the Honorable Judge Benitez ruled against California's magazine ban in Duncan v. Bonta and gave California residents "Freedom Week". The 9th Circus quickly put that order on hold and played all kinds of games until the case finally reached the Supreme Court in 2022. The Supreme Court decided Bruen in 2022 so sent Duncan back to the 9th with orders to "reconsider in light of Bruen".

In 2023 Judge Benitez again found that the magazine ban was unconstitutional. The 9th then played all kinds of games including some very unusual procedural shenanigans to ensure that the magazine ban stood. Well today the 9th once again ruled that under the Bruen standard that magazines can be banned as they aren't "arms" or "protected accessories" and thus unprotected by the Second Amendment. Secondly, even if magazines are "arms" they can be restricted under the American tradition "of protecting innocent persons by prohibiting especially dangerous uses of weapons and by regulating components necessary to the firing of a firearm."

None of this shit is real, logical, or supported by current Second Amendment jurisprudence. So now we get to wait for the Supreme Court to finally decide if being told "go fuck yourself, we will do what we want" by lower courts is enough to warrant them doing some work or if the Second Amendment is indeed a second class right.

So, don't get complacent if you don't live in California because once this shit starts happening it takes forever to fight against it. Right now we are 8 years into this and no closer to getting it resolved than when we started.

Brand New T2A Gap in Woodland for Rem 700 SA. Weight is 3.7 lbs. Comes with Atlas pic rail.

$850 shipped.

What could go wrong?

Login to view embedded media

For Sale: Zev Technologies - OZ9 grip kit. New in unopened bag.
Standard size
FDE in color
Sell for $SOLD.

Looking for a tripod caddy. Any color!

For sale great condition Mark 4 Hd 6-24x52 PR2 mil reticle, turret tape, AADMOUNT caps $SOLD shipped.

Selling brand new leupold 35mm super high MK4 rings . I don’t have the packaging $sold

30 mm night force rings 1.375 height SOLD

30 mm night force rings 1.500 height SOLD


Both night force rings are in great condition can send more pics if needed and or interested.

I am reloading 7 PRC using Hornady Custom FL dies. After my 2nd resizing , loading for 3rd time, I noticed some vertical buckling of the case neck as shown in the picture? Didn’t happen on first resizing. These dies are new, less than 50 rounds. Is this caused by a build up of case lube on the neck? Is it safe to shoot? I’m gonna clean my die body and try another round. I am using some older Hornady Unique Case Lube. Never had this issue before loading 300 Win Mag for years?

73 count Alpha, once fired 6.5 cm brass. Not cleaned, small primer. Same lot

77 count hornady 1-2x fired from hornady match ammo.
SS tumble cleaned, annealed on ampmk2. large primer

92 count once fired hornady, not cleaned. Same lot, hornady match ammo

Random brass, not cleaned
45 Hornady 6.5cm random lot and firing
7 count 6.5 brass with star head stamp
7 count norma and federal, alpha
3 count Lapua large primer
10 count Lapua small primer
29 count sig


$140 shipped for all brass above. 348 total count of brass.
The alpha alone is worth probably $60.
Perfect for a gas gun that won't be picking up the brass in the field!

Sharpie not for sale ... Sorry boys

Like new, less than hundred rounds on it.

One small ding from the safe

Sitting in a fde spuhr 4002

$3100 shipped with spuhr

$2800 shipped without spuhr

Not selling spuhr separately

No box

NO trades

Hey All,

At the Association we are trying to put a Statue up in Quantico, the memorial walk.

So supporting these fundraisers is helping us raise money as we need close to $3 Million to put the statue up

Foundation MG2 stock in black with arca rail, spacer, and KMW bottom metal--the stock and bottom metal are in excellent/like-new condition ($SOLD PP shipped)

I did a search and read what I could find on mirage, but I did not see anything specific about how to correct for it. I typically do not shoot in hot places during the summer months. Last weekend I had a friend in from out of town and he wanted to shoot long range. He can shoot and stacked them at 1000 yards. So I moved him to 1400 for more challenge with the wind. Normally I can get several rounds downrange before the mirage get's bad from the heat off the barrel. This weekend in the desert spot I shoot at it was 90-103F. No shade so the barrel was hot just from ambient temps and the sun shining on it. Normally I shoot out there in the fall-spring until it's too hot.

I let him do all the shooting with my 6.5 CM using factory Hornady 140 ELD-M and I stayed on the glass to give him wind calls and corrections. I noticed he would be good making hits and then after 2-3 shots it was like he was walking all over the place. I confirmed the dope, double checked the wind and everything was correct. Previous impacts were essentially dead center. I stuck the fan in the barrel and cooled it down. I laid some wet rags over the barrel to help cool the surface also. First round impact, second impact then 1.5-2 mils high, 1.5-2.5 mils wind (was getting harder to read the wind in the mirage in my Luepold spotter). My rifle has a 26"Bartlein M40 profiled barrel. It doesn't get super hot usually.

I made a turret correction, checked the weather DA changed by 400' which shouldn't affect that much. It asked for .3 mils less elevation. Let the barrel cool and it would be back on center or close if he made a good shot or my wind call was right. Once he made 3 shots, now it was low. Adjusted elevation back to where it was and elevation was high, or really close with a wind call miss. Light winds 3-6mph from 1:00-3:00 (switching). The only thing I can think of is the mirage was altering where he thought he was aiming. Can mirage affect vertical and horizontal picture?

Arken EP5 7-35 Mil 34mm tube-Brand new, just pulled out of box to look through. $620 shipped
Will post pics later.

Had my first issue with the Ckye double pull. Here’s a simple check/fix/cleaning for someone to avoid the same.

The spring/brass pin assembly in the leg got some dirt from the corn or alfalfa field in it. Had issues with the brass pin being able to move eventually just seizing it up in the unlock position where the leg wouldn’t lock into place.

Simple fix but a good place to make a regular service area in the off season

On another note after the cleaning I installed some new pod knobs. Really nice upgrade for anyone looking

It looks like Zermatt has a Lapua capable action coming out soon. Any chance, Ray, @Zermatt Arms, that the new extractor design will get carried over to the other boltfaces?

Any of you running 6.5 CM AR10s use 153 grain ATIPs? If so how much neck tension do they like? What powders do you use?

Reason I ask is I ran some factory Hornady 147 match ammo and it would appear that my SP10 likes heavier bullets.

Anyone have anymore info on these?

Uintah Precision seems to have more refined uppers but for the price on these it might be handy to pick one of them up if they shoot and cycle decently.

The only reviews I’ve seen are on their website. Seems they are just as easy to swap a barrel as any AR15 upper.

No idea on the bolt throw or how awkward it is to cycle the bolt.

Not for everyone but tossing a bolt upper in the case with an AR15 in a different caliber might be handy.

Ok, all the previous knee pad talk was old and stale, time for an update.
What are you guys using for knee pads when shooting? Mostly interested in PRS stuff, but I would possibly use them for other action shooting sports if they were suitable for running. Looking for strap on knee pads, not the pants with inserts.

Thanks.

Hi Guys,

I plan to replace my factory muzzle brake.

How do I remove it safely without scratching the finish of my HTI 50BMG?

Barrel was never fired, 26” barrel, looks like a heavy varmint or MTU contour.

For a curtis axiom action.

325 shipped

I have a 3 degree Kiji that I don’t need anymore. It work perfectly fine and everything that came with it new is included. The diffuser has been removed this included. The body and switch have been Cerakoted in foliage green.

$650 Shipped. Zelle, check or money order

I have 1,129 pieces, +/- a few, of once fired Hornady 6mm GT (GAP) brass for sale. 805 pieces have been deprimed and 324 pieces have been deprimed and cleaned.

$750 for entire lot. I will split shipping cost to lower 48 if you buy all of it. Not haggling on price.
$0.75 per piece for smaller lots and buyer pays all of the shipping.

Send PM to communicate.