Selling a Pure Precision m5 Short action DBM. Takes AICS mags. 115 shipped. Bottom metal only For sale. Pm if interested.

I have a 6601 that's still mounted and tons of parts will unmount when it sales. This mount was bedded when I received it and it's the best fitting mount I've seen on a spuhr.

6601 mount only $215 shipped

All the parts (screws and stuff) and accessories. (see below)
Is over $340 in parts listed below

I'll do $265 shipped
a bunch of new screws and stuff listed and the below.
1) A 0003
2) A 0001
2) A 0012
1) A-0029

So I bought 3 boxes of 134 eldm bullets last Nov and as I was loading discovered that 3-5 per box were missing tips, some were in the box while others were missing entirely.

I contacted Hornady and they sent 3 replacement boxes, I noticed one box had three tips in the bottom but all the bullets were intact???
The remaining 2 boxes appear normal but WTF is going on?

These bullets shoot one ragged hole but occasionally (like 1 in 10) will just do its own thing and randomly impact an inch or more out of the group..
It gets even weirder at longer ranges, I'll be right on target at 700-800 yards then get an unexplained random directional 2' miss.
My theory is that some tips are compromised in some way and coming off in flight.

I'm getting damn frustrated and considering giving up on Hornady bullets, anyone else have a similar experience with any eldms?

1. For sale is a excellent condition Giant Mouse ACE Grand - Green Canvas Micarta
Mechanism and lock up are excellent
Specifications:
Blade Steel: Uddeholm Elmax SuperClean, Stonewashed finish
Blade Steel Hardness: ~ 60 HRC
Handle: Green Canvas Micarta
Backspacer: Titanium
Pivot Mechanism: Ball bearings
Locking Mechanism: Liner lock
Dimensions:
Blade Length: 3.3125" (81.14mm) - Measured from tip to forward-most aspect of frame.
Blade Thickness: 0.157" (4mm)
Handle Length: 4.5" (114.3mm)
Overall Length: 7.875" (200mm)
Weight: 4.75oz (135g)

Asking $165 Shipped OBO

2. Excellent condition MicroTech Amphibian RAM LOK S/E Fluted
Mechanism and lock up are excellent
Overall Length:9.25"
Blade Length:3.90"
Cutting Edge:3.70"
Blade Thickness:0.15"
Blade Material:Bohler M390MK
Blade Style:Drop Point
Finish:Bead Blast, Stonewash
Edge Type:Plain
Handle Length:5.35"
Handle Material:G-10
Color:OD Green
Weight:5.90 oz.
User:Right Hand, Left Hand
Pocket Clip:Tip-Up
Knife Type:Manual
Opener:Thumb Stud
Lock Type:Crossbar Lock
Brand:Microtech
Model:Amphibian

Asking $250 Shipped OBO

3. Excellent condition Strider + Pro-Tech SnG Automatic Knife Solid Black Aluminum (3.5" Black) 2403
Mechanism and lock up are excellent and smooth
Overall Length:8.25"
Blade Length:3.50"
Cutting Edge:2.875"
Blade Thickness:0.13"
Blade Material:154CM
Blade Style:Drop Point
Blade Grind:Flat
Finish:Black
Edge Type:Plain
Handle Length:4.75"
Handle Thickness:0.50"
Handle Material:Aluminum
Color:Black
Weight:4.95 oz.
User:Right Hand
Pocket Clip:Tip-Up
Knife Type:Automatic
Opener:Push Button
Lock Type:Button Lock
Brand:Pro-Tech
Model:SnG

Asking $265 Shipped OBO

Single Pull with podlock lever rubber feet and leg latch extensions . $500

RRS TA-3 with bowl $250

Sig Kilo 6K HD with Applied Ballistics $650

Used Mark II with 6BRA pilot and 6 Creedmoor pilot
$1400 plus shipping

Login to view embedded media

Five indicted on charges of corruption and evidence tampering. Including Chief
PD employees ODing and dying at work .
Evidence “locker” not secure - evidence- drugs and money just disappear- strangest thing
1000’s of criminal cases stand to be overturned.
Wife of one of these hero’s charged with selling narcotics from evidence room .

Vortex Strike Eagle 3-18x44 SFP SE-1626 in a Burris Pepr Mount. Have the smooth ring tops for the mount.

Comes with box.

Asking $420 with the mount or $340 without. Shipped.

Bradley Cheek rest
Adjustable model
Like new
All black -- matte black with black straps

This was on an M1a rifle very briefly -- I have since sold the rifle and have no need for the cheekrest

PRICE: SOLD

Free shipping to 48 states

Prefer PayPal friends and family -- the one without the fees

Please PM me if you would like photos

Norma 6xc lr Primer brass

108 2x fired

252 pieces 3x fired fully processed ready to load, Annealed, fls, trimmed

$old shipped

Have loaded 6xc ammo as well
Pm for details

Still clearing more stuff. Stock specs are as follows:

REM 700 right hand SA
Mini chassis
M5 inlet
Proof sendero inlet
Comes with an SRS full length arca rail
Flush cups from and rear on left side
Hawkins M5 DBM included

Weight is ~40oz with DBM and Rail

May require minor relief for some clones action on the bolt relief side.

Asking $925 TYD

Only trades would be an XLR folding Adaptor or a carbon buttstock and folding Adaptor

I am finally going to get into night vision so thinking the heard a little bit to clear some funds. I have an LMT that will stay in the stable and also have a Geissele URGI, DD RIS III 14.5 and a BCM MCMR 14.5 looking to get rid of two of them and only keep one. Which one would y’all keep out of those three?

WTS BNIB never fired B22 Precision 22lr. $425 $400 shipped to FFL of you choice, obviously must accept shipment from private seller that i will confirm before shipping. Venmo or PP net, lots of stuff sold over the years.

1 sets ARC M Brace Rings 30mm diameter 28mm high (Medium)
Original boxes and wrapped in brown paper.
As new.
$150 shipped

Several legal immigrants are taking advantage of the F-1, OPT/STEM OPT, H1B, H4 EAD, and other visa types. The number of actual talented people who contribute for the betterment of this country is in hundreds while the actual number of people living here on these visas is in hundreds of thousands.

Consultancies hire students and pack 20 people into a house. They create a fake profile, market it, conduct proxy interviews, and take 30% of the paycheck once they are hired. There's the whole H1B lottery BS which should be completely canceled or changed to merit base, at the very least.

F-1 student visas should face technical interviews based on the field of study, during their visa interviews. STEPM OPT extensions should be canceled and OPT should be limited to the initial year. Only the real smart/contributing ones should be allowed an oppoirtunity for permanent residency and citizenship.

H4 EAD is for the spouses of people on H1B with their i-140 approved. This has no restrictions and they can work in non-IT jobs that are for Americans and even in state governments depending on where they are. Trump admin tried to cancel it during their first term but the dumb fuck libtard federal judges didn't allow it. Hope it gets revoked, this time. These fuckers make $300K+ per year while a hard working average American is struggling to pay their bills. Again, people with amazing talent should be given the opportunity and it doesn't matter how much they earn. But, I have seen people who pay ($800 per month) for offshore support to do their jobs while they make 6 figures here. Fuck them!

Sorry for the long rant, but I was reading about this whole BS and all the H1B scams. Steven Miller has talked about these issues in the past and even Vivek Ramaswamy did. I am hoping that they will make some major changes to the legal immigration system as well. This will help the true American loving immigrants have a fair shot at the dream.

label says it will hold 26 guns . almost bought the smaller safe

Selling a BE Meyers MAWL C1+ in FDE. Manufacture date is 03/2021. In good working condition with no issues. One small cosmetic mark on the back end which can be seen in photos. Zero effect on operation.

$2400 shipped & insured. PayPal FF preferred but can accept others.

No trades.

Hows it going gents.

Title says it all. WTB Badger Ordinance M2013 Long action (Magnum for a 338 Lapua build)

I know its a long shot but worth a try.

​

I have a couple of knives by Andy at Half Face Blades and they are remarkable.


Here is a Resco/ HFB combo set. Number 21 of 20... not a typo.



Dagger with a Brandon Webb designed RC.



And my EDC pneumo-spike with a canteen.

Bet you are sensing a theme here.

Bunch of photos are also posted in motivational and elsewhere of these amazing knives... by some others SH fans.

Show your stuff!

Cheers Sirhr

Just got the impact 4000 and so far, really enjoying it. I instantly wish I would've bought it months ago.

I'm curious where other people have installed their remote on an MPA chassis. Nowhere really seems great and the obvious choice is right below the ejection port on the magwell but I'm curious if anyone has gotten creative and done something different?

Selling my FDE nightforce nx8 2.5-20x50 scope with the mil-xt reticle. Includes an American defense 30mm qd scope mount with titanium levers. Scope and mount in great condition. I don’t have the box for either item, but I do have the fde flip up caps for the scope that nightforce includes with the NX8. $1850 shipped for both

Selling brand new in box Kestrel 5700 Elite weather meter with Applied Ballistics and Link. $650 tyd. Venmo or PayPal friends and family.

Selling this brand new Razor HD 27-60x85mm spotting scope.
New unused and in box.

Also new and unused in box The HD 22x reticle eyepiece in MRAD that you can swap onto the razor for ability to mil and range targets or give corrections.

Selling as a package for $1750 but willing to sell individually for $1500 and $300 respectively.
Paypal f&f prefered or Venmo

Setting the standard in high-end optical technologies, precision craftsmanship and ultra-sleek functionality, the Razor HD is one of the finest spotting scopes on the market. Advanced optical elements eliminate aberrations for distortion-free, flat field images with unmatched edge-to-edge sharpness, as well as remarkable clarity, resolution and color accuracy. Hunters, shooters and observation enthusiasts who need a premium spotter that performs at the highest level have found their match with the Razor HD series. One look and you’ll know.

Directly mounts to Arca-Swiss tripod heads without the use of additional plates.

Selling a MPA BA PMR Pro Rifle II 6.5 CM
With folding stock, weight kit and muzzle brake.
Left hand

Included is
ACCU-TAC FC-4 G2 F-Class Arca Spec QD
MPA scope mount
Vortex viper PST Gen II 5-25x50 FFP MOA
Pelican Vault case

Bought the gun 8 months ago and never used it. Still brand new with 0 rounds fired. Just don’t have the time. $2500 or best offer.

Bought a xero last Feb and have been using it for the last yr. I noticed early on that sometimes it would show the first shot in a session as 60+fps faster than the rest. Not always, and when it happens it was usually first rd. Fouled barrel, cold barrel, warm barrel, doesnt seem to matter. It has missed 15 or 20 shots over the year, but so did my magneto speed.

Yesterday, I did a velocity node test to narrow down a couple flat spots. Started at 40.4gr and went to 43.8gr in .2gr increments. I've done this test before with magneto and it worked great to find some accuracy nodes, using powders or bullets or cartridges I didn't have experience with. I trickled up to each charge and verified weight, alpha brass, br4, amd 107smk in 6creed load. The garmin was a shit show.
The ammo was loaded and went straight to range in loading block, it never left my sight. Cartridges were single loaded and fired in order, lowest to highest charge. Some velocities stair-stepped as expected, some dropped 20-60fps, and 1 dropped 150fps. The "slower" shots felt normal and in line with previous and next shot. 1 day I was having issues with it showing a random "fast" rd in a couple different rifles/loads groups. A friend had his garmin with him so we put them on each side of my rifle and only my unit would show a random fast shot, his would not. Mine even dropped a shot or 2 that his captured.

I talked to garmin today, hoping they would have an easy solution or rma this shit box. Unfortunately I get to be a garmin engineer and send them folders of data, kind of a pain in the ass as I'm not the most computer savvy. After I send them this, I have to do a hard reset, and then burn some more rds to see if it's fixed or not. If it's not fixed, they wanted me to get my buddys garmin, he's 40miles away, and run them side by side and video the discrepancies and send the video to them.

Seems like with athlons new chrono out, they'd really want to step up and take care of their customers, instead of have their customers do the fault analysis.