Recent content by fullersson

Re: How many honestly wear safety glasses I don't wear glasses much and my wife is always on about it. After seeing that I think I'll take my wife's advice. Brian Brown.

Re: Brake on a 22" 260? Anything wrong w/ Surgeon RSR? I've worked with 2 RSR actions. We put a a CG trigger system on one and a Jewel on the other. The one with the CG trigger system is on an Eliseo tube stock and is chambered in 6br. That gun is very accurate. The other one with the Jewel...

Re: Barrel Flex Question I've never seen one move with the naked eye. How did it group?

Re: About to attempt my first barrel removal I don't know if you're using the aluminum or wood blocks. I use the wood blocks and sometimes I have to use powdered rosin to get enough grip to remove the factory barrel. Good luck, Brian.

Re: help with rifel build please, I'll try to answer some of your questions as best I understand them. Bear in mind these are my opinions and I'm only speaking from my experiences. #1- I can't help you with #1 because I don't understand what is meant by put the stock "on scene". I'm not a...

Re: restocking a 721 Doug, Thanks for the explanation. Brian.

Re: Barrel retapering? A very well known rifle builder that I'm friends with taught me that you shouldn't do anything to the exterior of a barrel once it was rifled especially a button rifled one. A couple of years later he is fluting barrels for customers on a regular basis (cut or button...

Re: restocking a 721 Alright, I guess I'm going to have to show my ignorance here. Someone help me out with "the stock is for iron sights". I'm not familiar with the 721 and maybe that why I don't understand what the stock has to do with the sights. Thanks, Brian Brown.

Re: Another amazing gunbroker ad I'm not familiar with the auction type stuff, but does that guy want $3500 for a 30-06 on a Mauser action? If he does want $3500 for this rifle what makes it so valuable or is it completely overprised like I think it is. I know it is the very thick barrel with...

Re: Any coatings out there that will match KG FDE? cerakote This is the air dry cerakote, its is available in dark earth. I'm ordering some tomorrow to try myself.

Re: ACIS 2.0 Stocks for Remington 700s I just built a doctor a sub-sonic .308 on a new remington 700 with the x-mark trigger system and it dropped into the AI 2.0 without any modification.

Re: Gordy Gritters Videos I have the chambering video and now that I know the other two are out there I'll probably buy them also. The great thing about those videos is you can always go back as you learn or experience problems and watch the videos again. I've probably watched that chambering...

Re: Bolt Issue I would check the bolt stop and make sure it is working properly. If the bolt stop isn't damaged and is working properly then it may be something you're just starting to notice. I don't know how old your action is or how long you've been shooting that action but if you will...

Re: watched a bedding video for 700 rem varm. I use Devcon steel putty, but I would also use Marine Tex or Devcon aluminum putty wtihout any reservations. According to their website Surgeon Rifles beds with Marine Tex.