700

I am building two .284 Winchesters on Stiller Predator actions. I called Kevin Wyatt about using his expanded and extended mag boxes because I was not pleased with his old Center round mag boxes for the Short Mags(or fatter than 308 cases). Kevin Informed me he had added to his line 4130 CM...

I see lots of 20's and 25's, anyone make a 40 MOA?? Need it for a .22 RF 40X. Thanks HB

Got this rifle as a turn in by state police. Finally got it out to the range to work it out. It came topped with a leupold MkIV 3.5-10. I added Harris legs. Wasn't ready for a serious session. Just wanted to take advantage of the weather and the opportunity to light up some paper. I tried 4...

I didnt go with the timney tactical trigger. Instead i just went with a standard shilen trigger. They are rated a 1.5# to 3.0# I hope this is a decent trigger. Anyone running one here?? Lee

Picked this up a few days ago, first groups in this setup were great, I gotta head back to the sandbox so I will not be able to get a target load worked up. I did have a bunch of a certain hunting load worked up for my Kimber Tactical it shot great through the SPS tactical and the Rem XCR...

I am currently purchasing a stiller tac 30 for a build so I need to pick out a trigger for the action. I am willing to go to about 150 but would prefer around $100. oh and it needs to have a safety included. thanks scott

Hi Guys, I am new to the forum and have just purchased a remy 700 sps-varmint with a choate stock to have a go at longer range shooting. However I am experiencing a problem and wonder if anyone can offer some advice. I am trying to bed it in with some cheapish MEN 7.62 ammo, however after each...

I have both actions available for this build. I like the Rem because you can get anything for it, but the Vanguard/Howa action seems to feed the 223AI much easier and smoother IMO. I've been reading a lot about the 223AI and the 75 amax bullets. Seems to be a great little setup in an 8 twist...

Hello all, I apologize if this has been asked already... I tried search to no avail. Are the Remington 700 actions used in rifles with factory drop mag bottom metal the same as 700 ADL and BDL actions? Just wondering if another DBM system like the BO M5 or Seekins DBM can still be used with...

I was wondering what it would take to make the magazine longer SPS tactical or the varmint. I would like a longer COAL without making this a single shot rifle. I have heard of Wyatts but what does it take to install on of those? Thanks in advance

I just bought a new Rem 700 Compact Tactical. I wanted to see how the bolt cycled so I loaded a few rounds into the well. I first noticed that the 2nd one in would not stay down so I had to hold it down with 1 finger and start the 3rd one in and it holds the others down. I have to hold the 3 in...

Just picked up a slightly used PSS with DM. Searching here I've heard that the factory DM system isn't that great. I've also learned that you cannot turn a factory DM into a BDL without a new receiver. So that leaves me with getting a new DM system (Badger, Seekins, HS, etc). Will an aftermarket...

So I posted this in the gunsmith sections and got no replys so hopefully you guys can offer a little advise. I'm sending the muzzle break from my 700 sps tactical to be teflon coated, the place that does it has a $200 lot minimum. I'm wondering if disassembling the boly and having it coated as...

Started life as a SPS Tacical in a .308 Added: Badger bolt knob JP SS muzzle break (its gonna be teflon coated to match barrel) Haris bi-pod TPS Steel Base Leupold Quick Release rings Mueller Tac-II Scope B&C Light Tactical stock BlackHawk cheek rest So yeah, it is what it is. I like it...

I'm sure this has been asked a million times. Tried to search but couldn't come up with the answer i was looking for. Picked up a 700 SPS Tactical in .223. Put on an EGW 0MOA base, Burris XTR low rings, and a Wonder Optics 4-14x50 scope. Changed out the stock with a B&C Tactical Medalist. Now...

I have a new 700 sps varmint .308 on the way. going to put a 6-24x44 scope on it. what are the best rings to put on it with a TIGHT BUDGET($100-$150 max). looked at leupold bases but 1 piece? or 2 piece? rings? high, medium, or low? would also like the idea of having a base with 10 or 15 moa...

is there any place i can find a trigger lever for a remington 700 without having to buy a whole trigger?

Ive been banging on the 3/32 pin for an hour now..... is this thing glued in? it wont budge! I soaked it in kroil for 24 hours... I would take it to a gunsmith but I cant wait 6 months! any advice?

OK, I just picked up a new 700 SPS. This will be my new project gun. The first thing I noticed is that the trigger guard and floorplate seem to be made out of plastic? Is it really plastic, or just some cheap, cheap ass pot metal? I know Remington has gone plastic crazy in the past few years...

How is the bolt arm attached to the bolt on a Model 700? Is it silver soldered?