700

I just bought a factory take off barrel to replace my sporter barrel my rifle came with. Can I do the job my self or would it be better just to take it to a gunsmith?

Just wondering If bolt face on rem 700 can be opened up from standard to magnum? Any problems with doing so? Looking to build a 300 win mag. and have found a LA 700, but with standard bolt face, Thanks, Alan

It may not be the brightest idea, but in the interest of making everything interchangable, has anyone tried feeding a 700 from AR-10 mags? Is anyone out there building bottom metal to allow it?

Does anyone have any cutaway photos of a remington 700 action, barrel, chamber area?

Can someone who owns comparably equipped versions of each tell me their feelings on the subject? I had a TRG 42 in 338 LM and I sold it ( ) because of the general consensus that it was a waste of powder inside 1K. I use my GAP 308 for everything now, because my range maxes out just shy of 700...

I don't have a trigger installed yet, but my bolt lift seems really heavy, what could be causing this?

I just received a remington model 700 sa that has the front most mounting point stripped out. I installed a Leupold two piece base and the rear screw is tight. I put some locktite on and it seems to be holding fine after about 20 rounds. Would you guys leave it alone or have it repaired? What...

Final fixture here, It is made of 1/4" 6061 T6 flat plate with angle bolted to it. Everything else was trial and error junk I made my own because I'm a cheap ass. It's really simple, I used two pieces of 2"x4"x1/8" aluminum angle from my shop, some scrap wood, and a piece of 1/2"...

Brand new, no dirt or anything. Looks like the piece is sticking on the trigger. The stop it self seems to move freely. Any suggestions? Thanks!

Con someone who knows how to decipher the rem code tell me what year this rifle was made. I can't figure it out. It's a 700 bdl 300 win mag. Thanks G6599XXX

OK, so today when I ordered my HS precision stock for my 700 I picked up this old Canjar trigger. I REALLY do not like the X-mark trigger that came with rifle. Anyway, my stock will be here Tuesday and I was going to see if this trigger would work in my rifle. I just don't have any idea if...

.308 Remington 700 5R Nightforce 3.5-15x50 30mm scope, base and rings McMillan A5 stock Parker Hale bipod

Are there any companies making a 22LR action that will fit a Remington 700 format other than a Remington 40X. I have a short action AICS chassis and would like to build a trainer rifle. Stillers 25 X to be released soon.

Hi folks. I have been using the search function for the past few hours trying to figure out if I can take a Remington 700 in 6.8, and switch out the barrel for one in a different caliber, using the action that is in the rifle? I thought I saw a thread a while ago where a member was thinking of...

Hey everyone, I have a remington 700 LTR and I am having problems closing the bolt when I chamber a new round. The back end of the bullet is torn up from the extractor, so I assume it is a problem with the bolt/extractor. Has anyone had this problem before and how did you fix it? Thank you...

Struggling with a decision i need to make. There is a $500 difference between the two. Cant really seem to make my mind up. The tikka you seem to get more options...det mag, threaded barrel,etc... Want to go with the tikka but cant seem to pull the trigger on one or the other. Could someone...

Hi guys Looking to fit an AICS system to my PSS It has a Jewel trigger fitted and is only a girlie .223. Will my action drop in or will it need any machining bedding etc. Thanks guys

Anyone have a pre-xmark safety assembly they want to sell me? I just bought a trigger off of Gunbroker that is missing the sear spring and has the old "bolt lock" safety. On the gunsmithing side of it, would there be anything wrong with just cutting off the bolt lock lever on the safety and...

I will start by saying I am a dumbass. I took the trigger out of my rifle so I could bed looked it over very well before doing so or so I thought. Knocked out the rear trigger mount pin and this spring attacked me. It is a stock old style trigger the action it has lived in all of its life is...

I've been working on my shooting technique, but I'm having what seems to be excessive torque on the bolt lift once I've fired a round. I tried to keep my cheekweld and lift the bolt and I felt a slight pop in my shoulder- burned for about 3 hours. What is causing this added torque during a...