loads

Let me know what you guys are running. Bullet Powder Primer Case Velocity Barrel Length Accuracy Reloading setup Thanks

Hey guys, For those of you with GAP built 243s..can you give me your ogive to lands measurements with a 115 DTAC? + What loads are you guys running? Thanks for the help, Vu

I have a box of the 26 grain HP's by Barnes. Hodgdon lists data for 32, 35, 40 and 50 grain bullets, but not the 26's. I back calculated a load range for BLC-2 and H335 for a linear regression to 26 grains, added a little to the min, and worked up to a little past the max (1 grain) for what I...

Hi! Does anyone has good load for the AR10T in 308 Win. with factory 24" 1 in 11.25 ? I have some CCI BR2 ,210M Varget powder 155 Scenar ,167 Scenar 168 Amax 175 SierraMK Thanks in advance!!

Hey everyone, I'm new here. I'm building my first real accurate bolt rifle (Remy 700) in .223AI. The action is currently with my gunsmith awaiting a 1:8 Lilja barrel. I know the 75gr. A-Max is a really popular projectile for this cartridge. Does anyone have any experience loading with the 80gr...

With either a 208 AMAX or the 210 Berger VLD. It's a 20" LTR, if that matters. Thanks,

Does anyone have any good hand loads I can try in my savage 243? My uncle gave me some that he made up for his rem 243, but they just dont shoot good out of mine.

Ok, So I put a Lilja AR740 barrel on my AR... I did the 'ol load .5 grains under max and see how it operates with Hornady 68gr BTHP Match bullets, W748, and 556x45 NATO brass. It's the first time I've ever gotten 6 inch groups. It was BAD! REALLY bad... XM193A was good. Nosler 55gr BTBT...

I'm looking to get some info all together in one place on 155-gr HPBT loads, starting of course with the "old" Sierra 155. Also interested in any successful loads from those of us on the 'Hide. FWIW, I tried some Lapua 155s over TAC and the OCW over five charges resulted in NOT One Charge...

Rifle- Remington 700 SPS Tactical .308 EGW 15 moa base Warn medium rings Bushnell 4200 Elite Tactical 6-24x50mm Harris Bipod Round- Sierra Moly-coat BTHP 168 gr. Accurate powder 39.1 Federal match primers once fired Black hills Brass gr.

Just bringin back the load data My 2 best loads so far. 190 SMK, 59.5 RL22 178 AMAX, 58.5 RL22 Cant remember the COAL, got that written down. No chrony. 190's gimme an inch at 100 and the 178s around 3/4 with my stock 24" sporter barrel and untouched action.

As the title says, I need starting loads. I tried all the manuals that I have access to, and looked anywhere I can think of. Powders I have are: Bullseye, Unique, Ramshot Silohuette, Power Pistol, Blue Dot Bullets I have are: 100 grn half jacketed RN's and 85 grn FMJ round nose. New brass...

Does anybody have any loads for 95vlds for 6mm remington. I have a 40x in 6mm and havn't found any loads to start with.

I looked through the load data for .308 and only found a couple loads using BL(C)2. I just ordered 8lb of it since the other stuff is hard to get. I have some Sierra 150 gamekings and 155 SMK and 175SMK. Any secrets from the pro's?

I looked and could not find an anwer to this question. I'm just starting to get into reloading, and I'm working on getting supplies. I just purchased my powder and came to the realization that I have no idea how much powder I need. I got 2 pounds of Alliant Bullseye for .45 ACP loads, and 5...

I've always read that to fireform the parent case to an Ackley, you should use a small charge of fast powder, and have the bullet solidly in the lands. In the new Varmint Hunter, there is an article on Improved cartridges, and the author quotes P.O. Ackley as saying, "Fire forming should be done...

What powder are you using for 9mm subgun loads??

Any thoughts.....

I know i have seen this here, just cant find it. Search didnt bring it up. Im looking for good 1k loads for a 308's. One with 22 inch 5r barrel, one with 20 inch 5r. Just wondering what you guys are loading for max accuracy. I have been using varget, getting ready to test some 4895. Im partial...

Anybody share there 260 loads. Just got mine built up and would be good to hear some variety. I plan on shootin the 140gr SMK. I mated up a 26" pipe 8 twist to a 700 action. Thanks for your input.