• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

recoil

  1. Wild Eyes Woodworks

    SOLD XLR mercury recoil reduction rod

    140 new. Used for a season until I needed to shave weight for NRL hunters. 110 TYD
  2. All~American

    Recoil and POI

    Hopefully this doesn’t start WW3 but I’ve accumulated a question concerning the affects that recoil has on your POI. While doing some load development with my AR chambered in 5.56, I had a few shots out of my vise where I wasn’t properly shouldering my rifle (it was an awkward position). The...
  3. aoisdff8a7ytuigh

    .300 Win Mag Recoil

    Hello forum, I just recently purchased a Howa 1500 in 7mm Rem Mag. Compared to my dads old .30-06 rifle with a Woodstock, it hardly kicks at all. I’m considering buying a .300 Win Mag now, because I previously wouldn’t dare to buy one because I thought all magnum cartridges kick more than my...
  4. aoisdff8a7ytuigh

    7mm Rem Mag Recoil - How bad is it?

    Hello forum, Before asking for some information let me give a brief description of myself. I’m 5’6, 116 Pounds and 13 years old. But, I am not very recoil sensitive at all I’ve shot 00 Buck 3 1/2” Magnum shotgun shells out of a 8 pound shotgun, and on a .30-06 my favorite bullet weights are...
  5. M

    Muzzle Brake needed!

    I am an ex baseball player and have had shoulder injuries. Even shooting my .30-06 bothers me after multiple shots. What is a good clamp on muzzle brake or inexpensive brake? I really do not want to spend the money to get my barrel threaded. What are the best clamp on brakes and are they...
  6. E

    limbsaver for AICS

    Quick question. Doesn't limbsaver have a model that fits the AICS? Or will I have to go with a "grind-to-fit" model?
  7. Lowlight

    Online Training Teaser Video

    Here is an online training teaser video, this is the recoil management lessons recently posted. <iframe width="853" height="480" src="//www.youtube.com/embed/727AupokjMg" frameborder="0" allowfullscreen></iframe> The Lessons are $10 a month and can be subscribe too under the Paid Subscription...
  8. savageeaglenavy

    Sidearms & Scatterguns Tricking out a Glock 23

    I am looking for a 22, 23 or 27 for my wife as she finally gets it and can handle the recoil after she listened to me. So now I am looking for I think a 23 for her because it has capacity and plenty or grip for her to control the weapon. I have been looking at different lasers and wanted to...
  9. bohem

    Suppressors Neilsen Device - Recoil Booster Pics

    Does anyone have some? I'm trying to work out a design to get a G17 to function for a Form 1 project. It cycles just fine on the 9mm carbine, and the ammo certainly works without the can on the G17, but I need to put a recoil booster in there. Any pictures of the mechanism would be dandy, or...
  10. pshell

    Gunsmithing Limbsaver Recoil Pad install

    Finally got around to starting the install on my grind to fit recoil pad. This is going onto a HS 700P stock. Thought I would post to show how easy this really is. You just need to take your time and try to remember that you can't put the material back once you grind it off. To the pictures...
  11. NikolaiS

    Rifle Scopes felt recoil, muzzle brake vs scopes busting?

    Maybe a bit of a complex question here. (And this isn't a post about who's brand is better.) Some scopes out there have a rep for tremendous ruggedness. Bang 'em around, mount 'em on a .50 cal, and they're fine. SB, USO, etc. Then there are some brands where people have reported their scopes...
  12. BMG50CAL

    Suppressors Should i replace the Sig229 Recoil spring

    When should i replace the recoil spring on my sig 229 ? How will i know when its time ? Where to buy spring and are they all the same for the p229 9mm sig? Will it cause any issues when the spring starts to wear out ? How do you guys like the sig p229
  13. miniman93

    Hunting & Fishing help with recoil

    alright i shoot a remington model 700 30-06,i wiegh all of 115 pounds. the gun is real light and kinda kicks my ass any tips to help with the recoil
  14. S

    Gunsmithing Recoil lug alignment

    How do you align the recoil lug when you are putting on a new barrel. I was thinking of leveling the action and just trying it untill the bottom of the lug is level. But im sure there has got to be a better way. Im not sure what lug I am going to use yet.
  15. M

    Rifle Scopes Recoil shoulder on bases ?

    Gents: Have a question in regard to recoil shoulders on scope bases. I've looked at TPs bases and rings, they say thay have a recoil shoulder on their bases to prevent movement during harsh recoil. The quetion is, does this require a clip slotted receiver to be mounted ? If not please explain...
  16. L

    Gunsmithing Need 2 Recoil Pads Ground

    I'm looking for a professional gunsmith to grind 2 Kick-Eez magnum recoil pads to fit AICS units. I'd only need to send him the two pads and a 1" plastic spacer from an AICS as the pads mate with the spacers, not the stock itself. It should be a simple job - the screw holes are already where...
  17. tireys

    Gunsmithing Recoil lug

    I am building a Rem. 700 in .243win. I have some parts already but still need a few more. 1 part I need is a recoil lug. How do I know what size to get?
  18. S

    Gunsmithing switch barrel question recoil lug??

    Does the recoil lug HAVE to be pinned in order to have a switch barrel rifle? If so why? Thanks, Lee
  19. stillbuster

    Gunsmithing AICS recoil lug opening dimensions?

    What are the factory dimensions for the recoil lug opening on an AICS for a Rem 700 SA? My search fu is very lacking this a.m.
  20. M

    Fieldcraft Recoil off bipod

    I shot off a bipod for the 1st time today. (In the past I have shot off of bags) I noticed that when the rifle recoiled it would come back and jump over to the left at the same time, so in looking through the scope after the shot the scope would be pointed to the left of the target far enough...