Can’t seem to find a factory hunting load that my 300 prc likes. How much would it cost me to get into reloading (from scratch) instead? I have once-fired brass. Need everything else, including some variations of loads to see what works.

For those who want more info, I’ve tried hornady’s 3 variations of 300 prc. It shoots 1/2MOA with match ammo. Throws the other two varieties all over the place. I need something I can hunt with, so just shooting eld-m does me no good. Berger ammo might work, but I’m starting to wonder if I could just buy reloading supplies cheaper than backordered $80/box Bergers..

I don’t shoot competition, so I don’t need to mass-produce ammo. I do shoot enough to to be confident taking down an elk at 1000 yards. Might go through 100-200 rounds a year.

This would be full replacement, not rotator cuff. Looks like I'm facing it before long. I'm good about this stuff, will do all the PT, so questions.

-How was the pain level?...say compare to a hip which wasnt too bad?

-Recovery time? How long to drive?

-How about impact from recoil? Judging from my hip, if you do your PT, once its all healed you should be able to return. I'll like not go higher caliber than a 300PRC/WinMag

I'm looking at buying a Triggertech trigger, pros and cons of a flat vs. curved trigger bow?
I've only used curved factory Remington triggers.

Came as an assembled rifle from American Rifle Company. 25” barrel, 1-7.5 twist. Replaced trigger with TriggerTech Special PVD black, two-stage flat faced trigger (included). Also will include an additional bolt knob, spare firing pin, and striker spring compression tool.

Only 120 rounds fired. Shot excellently, including some sub-half MOA 5rd groups.

Only $1200 shipped shipped to your FFL. (CONUS). Guntab payment strongly preferred. Thank you!

Welcome to justice in the Big Apple.




The face of somebody you would want falsely imprisoning your wife and demanding money?

Witnesses and police said the chaotic ordeal began when Matthew Roesch, a 49-year-old homeless man, held the emergency gate open for a 40-year-old woman at the Midtown station.

When she tried to walk through, he blocked her way and demanded money from her, according to court documents.

“If you don’t give me a dollar, I’m going to take your purse,” Roesch said, according to police.

She refused, and Roesch began screaming at her, the complaint said.

Cops said Rote warned the panhandler to leave the woman alone — and witnesses told officers that he then whipped out a gun and yelled, “Get away from her!,” sources said.

Click to expand...

I have a 6.5CM tikka that I really like. I've got dies/brass/bullets/powder for the 6.5CM and it's a good gun for the longest ranges I can shoot where I live, so I think I'd regret selling it all. I want to start shooting 6BR for PRS, but don't want to buy another action/barrel/scope etc. My barrel is a barrel nut system, so I was thinking of just getting a 6BR barrel and swapping it on my current rig. I'd mark the timing on the barrels to keep the headspace consistent for my brass. Is there any downside to this? Anything I'm not thinking of? I probably wouldn't swap back and forth a lot, but would like to have the option to. Would it cause weird uneven wear on my bolt lugs or the action?

Hello members of the Hide!

I’d like to offer up for sale my 18’(small firing pin)AI AT308 for sale. The rifle has a total of 350 rounds of 308 through it and while it’s a rifle of exceptional quality, I find myself not shooting it as often as I had dreamt. I also would like to offer the scope that resides on the rifle, a Tangent Theta TT315M with the Gen3XR reticle. Both rifle and scope are in near new condition as I only shoot at an indoor range and haven’t put either through any form of rigorous use.

I’d like to sell the AT308 with the following accessories: Thumbhole grips as well as factory grips, keyslot bipod adapter and BT spigot mount and picatinny adapter, LOP spacers, and one 10rd magazine. *Trade Pending

I’d like to offer the TT315M with all factory accessories, killflash, manuals, scope caps, and original box for $2800 shipped.

I know this maybe a long shot but I may be interested in trading for a nicer Over/Under as well as have been looking for a Brownells BRN-605 complete rifle or upper receiver.

New in box Garmin Xero C1 Pro chronograph. SPF

I wonder if they hosed hm down before he went in the back of the squad car.

VIDEO: Golfer traps suspect in Port-a-Potty on golf course​

WMUR
https://www.wmur.com › article › golfer-traps-police-s...



2 days ago — Body camera footage from police shows a chaotic stolen car crash and chase that ended with a suspect found in a Port-a-Potty on a Wisconsin golf ...

Has anyone had any experience with both of these suppressors? What are your thoughts? Which is better at what? Which do you prefer?

I will be shooting primarily 223 through my suppressors with some 308 mixed in occasionally. Both calibers will usually be bolt guns but will be used on an AR15 as well in 223 as well.

Here is where I’m sitting: just got approved to go pick up my DA Sandman L. Purchased this 8+ months ago and at the time was just getting into shooting more, and don’t know shit from shinola about suppressors other than the fact that I really wanted one. I like and trust my FFL dealer which is who I’m going through with all the paperwork to get the Sandman. He strongly suggested choosing either the Sandman L or an Omega 300, and I ended up going with the Sandman L… But knowing what I know now, I’m left thinking I wish I had gone with the TBAC Ultra G2 SR. TBAC wasn’t even mentioned by my FFL, for whatever reason, and I didn’t know one company from the next other than what I was reading online, which was far from strait forward, especially to someone who isn’t in the know on the subject.

So seeking opinions, comparisons, etc. Even if the TBAC is better, is it leaps and bounds better? Or do you think I would be just as happy with the Sandman L? Is there anything that I can even do about it at this point anyway now that it’s been approved by the ATF? Or do I have some means of selling the Sandman L still since I haven’t picked it up yet? If I can sell the sandman, would I loose my tax stamp, or could I still use the same one when going to get a TBAC Ultra? Is there any way to attach a TBAC Ultra to a DA Keymo break? I know TBAC has some kind of adapter to fit different kinds of breaks other than the specific one it was designed for, but that’s the extent of my knowledge regarding that. My biggest worry is that I’ll get all my guns set up with DA Keymo breaks only to find myself switching to the TBAC dowm the line, and then having to re fit all my guns with TBAC breaks, leaving me with one hell of an expensive paper weight.

Thanks in advance for any info provided. It’s much appreciated!
-Trent

Offering a CZ 457 Match (different chamber than standard 457) with a Timney 457 Trigger, MDT Oryx Chassis, Area 419 40MOA Scope rail, (3) 10rnd CZ mags, (1) 5 round CZ mag, MDT Arca rail, and 300 rounds of L/Center-X. 300 rounds fired. Shoots great, no issues, just not using. Scope and bipod not included.

$1350 shipped for everything above. *Not separating parts or selling ammo separate. PayPal FF, US Postal MO, Apple Pay accepted. Shoot me a PM. Can provide cell or can FaceTime to inspect rifle.

Possible Trades (+ cash on either end depending on deal):
M24 Profile 6.5Creed 24-26” 1.75 or 1.7 twist Impact prefit barrel.
M24 Profile .223 24-26” 1:7 twist Impact prefit barrel.
Impact .223 bolt.
Impact short action
Foundation Exodus stock, RH, dark distressed, with btm metal for an Impact SA.
Vortex Razor Gen2 E 1-6x
ACOG TA33 or TA11 with horseshoe or crosshairs reticle. Preferably with RMR.

Black Friday Sale Sunday November 19th - Monday November 27th

OK, It's that time of the year when we do all we can to help you give, or get, the Christmas gift you've been wanting, dreaming of, have wanted but haven't pulled the trigger on yet, etc, lol

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Check out our new Apparel Section for great branded items. Sizes to XXXL

Our web builder has gotten the discounts incorporated into the site, and this will run through midnight on Monday November 27th. If what you want isn't there or discounted please give us a call, 516-217-1000, and we will do all we can for you. If you don't ask you'll never know.

We are cutting prices on a huge portion of our inventory.....
Arken, Athlon, Element Riflescopes, GPO, Hawke, Kowa, Meopta, Sightron & Sig Sauer

From November 19th - December 1st select Nightforce Riflescopes are on sale at reduced pricing.

Zeiss V4 Riflescopes, Conquest HD Binoculars & Zeiss SFL Binoculars are on sale through the end of November.

We've got some Extra Special Leupold Deals for you.

Your Choice of Swarovski EL 8.5x42 or 10x42 Binoculars reduced to only $1,999.00. If it's their 15x56 SLC's that interests you it is on sale for $2,399.00

We have a great selection of Refurbished Pulsar Thermals at EXTREMELY REDUCED PRICES

We've posted a huge assortment of Open Box Nightforce Riflescopes which have never been mounted and are the same as new at great prices.

Open Box Sig Sauer Optics at huge savings, also same as new.

Open Box Swarovski Optics which are on sale at very attractive prices (Riflescopes have never been mounted) & some Hawke Optics as well. These are all in as new condition and have full warranty.

We have some Meopta & GPO demo optics with full warranty at sharp pricing.

We are doing our best to offer super deals in our Flash Sale Section and to change these great deals weekly.

At Camera Land we've been working hard to save you money and get you great products. We could go on and on with all the Black Friday Deals we are running, however, just give us a call, let's discuss what is the right product and we will hook you up.

Check out our Just Arrived Section and remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Used trigger tech diamond pro curve.

$230 shipped.

Anyone here into Coin, Paper Currency collecting here ?. I know this does have hobby interests to some out there.
Also add, I know little to nothing on the subject. what I have here, it All looks like Monopoly, play money to me.

Recently found some old Paper Currencies found pressed in a book.
So for anyone here bored on a Saturday night, If you want to play Inspector Clouseau ?

What I am doing is just lay them out here, and taking a Pic. of the Face and Back of the paper.
-


-


-

2020 GAP PPR IN 6mm CM w/Bushnell 3.5-12x50 ERS Elite Tactical mounted in APA 34 mm low rings.
****Does NOT INCLUDE Bipod, or APA Brake as shown.****

THIS IS MY SHOOTING PARTNERS RIFLE, SHE'S JUST NOT INTERESTED IN COMPETING.

Only 300 rounds down the barrel!! I broke in the barrel properly, ALL Slow fire..... She's a girl, and this thing shoots lights out with my hand loads! Berger 109 LRHT behind 40.0 grains of H4350, F210M primers in Alpha brass.
Edit: Barreled action was (Bedded around the lug and the first 1” or so forward of the recoil lug.)
1) 10 round MDT magazine.

Sold Separately:
She still has 100 rounds of my hand loads available to buyer for free plus the remaining fire formed 198 pieces of Alpha brass. $350 for brass and ammo.
6) Boxes of Hornady Match 108 gr. ELD Ammo @ $35/box.

$3,450.00 complete rifle and scope only. Shipping FFL to your FFL $100.00 additional.

Pictures to fallow as it's easier to load those from a phone.

*SOLD*

I just received this from CS Tactical last Friday, it’s like new, not a scratch or mark on it. Includes box and paperwork. It’s currently mounted in a Spuhr SP-5002 which is also new that can be included for an additional $300.

I prefer tree reticles and know I’m not going to be happy with this long term so I’d rather move it down the road before it’s used.

$1700 $1600 shipped FIRM or $2000 $1900 with the mount. Payment via Zelle or Venmo. NO TRADES.

Everything New only 10 rounds test fired.

Direct upper drop in on AR lower.

Dedicated 22lr upper w/ 4.5" CCMG barrel, Dedicated bolt, CCMG 22lr charging handle.

*4.5" barrel keeps most 22lr ammo subsonic

KVP XL Linear Compensator

3 New blackdog 50 round drums.
2 New Blackdg 25 round mags.

Bore buddy complete upgrade kit for short barrel AR22 builds (4.5-12″) or subsonic ammo in long barrels and includes:

1x Lightweight Adjustable Bolt Weight (all adjustable bolt weights included)

1x Pressure Plug

1x Charging Handle Insert

1x Premium Firing Pin (with spring)

1x Hardened Power Extractor (with increased power springs)

5x bolt buffers

1x Recoil Spring Kit (with 3 different power springs)

5x quiet collars

All original ccmg bolt hardware included as well (New/un-used)

Brand new Ronin P12 optic.

4000 rounds (2 cases)
Aguila Super Extra 22 Long Rifle Ammo 40 Grain Standard Velocity

Also have CCI standard velocity if you rather have that instead.

If you know what this is, you know the reliability of this 22lr upper.

Ran into a pinch and will just have to buy this again in the near future. My loss your gain.

New Camo wrap for aesthetic and comfort purposes. Will come off easy with no residue.

22lr upper with all the Bells and whistles cost roughly $700

The 5 mags Mags and 2 cases of ammo cost
$565

Will sell everything as a whole for $1050.

And the media IS THE PI**a G@te!!!

(I redact because someday they will bot search key words for (((redactions)))




Gee, why does he not appear on Wiki?



GO LOOK FOR YOURSELF.

Now that I have your attention, how? What does it take to produce 1/2 MOA(ish) groups on demand? Is it even possible with 22LR and if so, with what caveats?

There are enough 6x5 averages posted in the 1/2 MOA range that it can't be a statistical anomaly. There are some extremely skilled shooters on this forum with the best available equipment. Personally, I consider myself a mechanically good shooter with good equipment. I would guess I'm capable of holding sub 1/8" MOA from a bench or prone with a bipod and squishing rear bag. I shoot a V-22 with 18" Bartlein MTU barrel. During ammo testing I averaged 0.905 MOA at 104 yards over 10x 10 shot groups with the best lot of Lapua X-Act. I had a calibrated wind flag at 50 yards and tried to fire all shots with less than 2.5 - 3 mph crosswind. I'm admittedly a novice with reading wind. I made no effort to compensate for wind during these groups.

For those that have posted averages in the 1/2 MOA range, could you do so on any day, or were those days "special"? Could you do so throughout the day, on any "average" day, or were those groups shot on the one day every 3 years where there is no wind between 6:45 and 7am? Are you shooting indoors? Are you talanted enough to shoot 1/2 MOA in variable winds without flags? I would like to believe it's possible but rare.

My perception is it takes a lot of ammo well matched to the gun, with either an exceptionally good shooter compensating for wind, or exceptionally good conditions. If I were to offer a $100k bet for you could show up at my range tomorrow, regardless of conditions, and produce 10x 10 shoot groups with a sub-1/2 MOA average, would anyone be interested and how would they approach it? What does it take to go from 1 MOA to 1/2 MOA groups (consistantly)?

For anyone curious, here are my results from X-Act testing along with my best target.


This is my best group from the session. Excluding the high right shot, it is 0.485 MOA. As a point of reference, a 1mph change in crosswind component accounts for 1/2" deviation in that shot.



Jeff

SOLD
1675 shipped. Comes with a lens shade. Scope is functionally perfect, and cosmetically good. There are a few small dings on the edges of the turret covers, ring marks on the tube, and some small scratches. It is a great scope but I have downgraded to a 3-18 and can’t justify this one laying around. No box, I will cover the postage to you and will include a $5 gift card for a convenient retailer: Target, Wally Martinez, Kroger, etc. Buyer will need to buy a new 2032 battery(can’t send it through the mail)

I'd like to know which tactical scope makers ship their optics from the factory in sealed boxes, so I can tell which are truly new (and which have been opened)... I'm curious about brands like Zeiss LRP S3, Nightforce ATACR, ZCO... thnx

Time to send this one down the road. I originally purchased this for Local PRS matches for the barrel change capabilities, and ended up buying 2 more AT's, which one was converted to the AO system. This is a 2017 manufacture year, with a Bartlein 20" Wintac 308 Win barrel, in the venerable shade shifting Elite Sand! . The barrel has 300-325 rounds on it, and the action, with small firing pin, as about another 1,00 more of 6.5x47L rounds from use in one season of a local PRS matches. Forend for the matches was an aftermarket one, so the factory keylock one is free from any dings and scratches. Everything aside form the AO QD is factory stock.

Comes with :

• three Pic rails, 2 short, one long
• Accuracy Obsession's Keylock QD mount
• RRS BAX15 Arca Auxiliary plate
• Sawtooth Arca forend rail
• 2 Elite Sand AX magazines
• Original grip spot (where RRS plate is)
• Harris Bipod mount

Looking for $5600 SEE MOST RECENT POST FOR PRICE Shipped to your FFL, or best offer. No trades and no parting out at this time. Electronic forms of payment, ask ahead (the one that starts with p), otherwise cashiers/bank check will do. Feel free to ask any questions and for more pics.
Thanks!

FN Herstal spr custom barreled bolt action rifle. Near manuf. 20 MOA base.
Factory Detachable Mag bottom metal takes original 4 rounders,
20" varmint contour, Rock Creek stainless barrel chambered in 308 Winchester
Cerakoted tan - left side chamber area says ‘Embrace Your Rifle’

Barrel work and cerakote done by Rock Creek
McMillan A3 stock OD green molded in, no pillars

Round count - 420 mostly factory match

Barreled action with factory bottom metal and 1 mag / $1250 shipped
Mcm A3 stock only - 475$ shipped

Entire rifle - no scope, sling, no bipod, - $1700 shipped/ insured full value
Target is from 3 weeks ago, 100 yds off bipod with factory 175 OTM match B.hills


No trades except - PSA Sabre 10a1 16” AR10 or POF AR10 16”

For sale is a gently used AMP Annealer MK2 Aztec mode with #10 pilot, a #73 pilot, and a shellholder
Price: $1395 shipped

I accept PP Friends and Family, USPS Postal Money Orders. Many happy customers see my feedback. No trades, thanks.