So I decided to take in a little gun porn and went to GAP's website . I peruse , deerool and got wet over the M40 A5 .
So's I gits to checking out the appropriate scope for said
Boner Factory and ok . Schmidt and Bender 3-12 Police . It's Mildot .
Ok so to qualify . The Tier Potatao in my Avatar description is not a joke . My limited experience with optics has been Mil dash . I find them crisper . I zero to frame my POA between horizontal and vertical stadia . It gives me two points of reference . Mildot seems less accurate as I envision placing said dot over the POA .
What am I missing . Is my assumption wrong .
Yes this is the proper place on the Hide to ask this as I welcome the Bitch slapping and legit answers . I will pay extra for genital torture .
Seriously , school me .

Why is this whore still relevant and what is her case against Trump all about?

I was in a lgs yesterday and ran across a McMillian A3. It's green. It's real heavy so I assume it's sniper fill. It has an external adjustable cheek riser like you see on the A4. It is in new condition.
The guy said $700. What would it cost me to have it inlet for bottom metal and m40 barrel contour? Just trying to decide if I should grab it.
I tried to call GAP and even McMillian but I can't get anyone on the phone. I told the guy I'd let him know tomorrow.
What do you guys think?

For sale various wie bad bags all heavy fill and waxed except the small rear bag. 2 still have the tags on them other barely used. All are 55 bucks you pay shipping the rear bag is 25
The big one is a max and the others are minis

Had an “Older” Timer tell me some years back that you can burn Poplar wood for heat. Well, I was always raised that you don’t burn it for heat. Am I mistaken here? I have 4 good sized Poplar trees that I’ll be dropping once the snow clears. Can I burn it for heat in the house next season or should I just drag it over to the burn pit? Probably about 3/4” Cord worth of wood once I’m done topping, limbing, and get to bucking.

I'm pretty sure this going to work to stop most thieves.....

White Feather - The Most Hardcore American Sniper - YouTube​

YouTube
https://www.youtube.com › watch








12:51
The weather was humid and extremely hot, and sniper Carlos Hathcock and his spotter, John Roland Burke, were tired from running around the ...
YouTube · Dark Docs · Jun 1, 2022

First things first: Not a native American, so please excuse any wrongly used words or terms.

My process of reloading .308 Win included (but is not limited to) running the case through my Triebel BR neck sizing die with the expander ball included. This turned out to have an average runout of around 3-5/1000. Of course I thought that this could definitely get better so I watched some videos where they introduced something to me that was praised as the ultimate runout neutralizer: an expanding mandrel.

Quick I went and bought one online, namely this Wilson expanding die.

When I removed the expander ball from my neck sizing die and used the Wilson die afterwards I was curious and checked the runout. It went from an average of 4/1000 to a nice and smooth 75-100/1000.

How on earth could this happen? Did I buy something wrong? I always thought that expanding from above instead of pulling apart the case when expanding is the way to go.

Or another reason to avoid California.

Rain, Landslides in California Leave Part of Pool Hanging Off ...​

insider.com
https://www.insider.com › News



7 hours ago — Part of a backyard pool was left hanging off a cliff after heavy rains in California caused mudslides. Land from under the pool's edge appeared ...

I knew he was guilty…..the international court just put an end to the war!

What a fucking joke!

I'm trying to come up with ideas to deaden the sound of my test shots in my basement range. I'm thinking of constructing a really basic box. Something along the lines of an OSB box 24" by 48" and lined with insulation. Maybe the end closed down to 18"x18". Essentially, you put your firearm into it, sight down it to your target, and the insulated box deadens the blast. Or at least that's the idea. It certainly wouldn't silence things but I think it might muffle 22LR-? to a fair degree. Not every gun is suitable for a suppressor and this is just an idea that I thought might help lower the noise a bit.
Has anyone else thought of or tried something like this? Or is this just a waste of time?

There is a phishing site using Gunbroker. Not me, but our son got an email from a “gunbroker Look-a-like” site trying to get his credit card information.

If you get something from an account you may have with Gunbroker, be very careful

(He did not fall for it but it was close, only a double check with the Gunbroker site confirmed there was a problem.)

Today is a great day! Once again, Cadex is expanding its production capability!

Our team is currently installing 7 new machining centers on the floor.

- 3 new 50-tool HAAS CNC machines
- 2 new manual lathes
- 2 new manual millings

With the recent addition of 9 robots and targeting no less than 12 of them running by the end of the year, we expect to speed up deliveries quite a lot within the next couple months.
We now reached the impressive number of 35 machines making us the biggest precision rifle maker in Canada

Thanks to our worldwide customer for their continuous support

------------------------------

Aujourd'hui est un grand jour! Une fois de plus, Cadex augmente sa capacité de production!

Notre équipe est en train d'installer 7 nouveaux centres d’usinage sur le sol.

- 3 nouvelles machines CNC HAAS de 50 outils
- 2 nouveaux tours manuels
- 2 nouvelles fraiseuses manuelles

Avec l'ajout récent de 9 robots et l'objectif de faire fonctionner pas moins de 12 d'entre eux d'ici la fin de l'année, nous prévoyons d'accélérer considérablement les livraisons au cours des deux prochains mois.
Nous avons maintenant atteint le nombre impressionnant de 35 machines, ce qui fait de nous le plus grand fabricant de fusils de précision au Canada

Merci à nos clients du monde entier pour leur soutien continu

Nightforce NX8 2.5-20x50 Mil-XT reticle. Comes with a 1.5” height badger mount.
New condition no scratches or scuffs.

$1700 with mount
$1600 without mount

PayPal FF or Venmo

$220.

Used Bix'N Andy TacSport PRO, less than 8 months old. I'm not smart enough to use this thing, sent it back into BulletCentral where they cleaned it and replaced a spring. I'll stick to my old triggertechs.

Prefer PP.

On point...

Fasten your seat belts. Do what you need to to prepare. Its going to be really bumpy.

Looking to sell my ESS with folding buttstock, used for 4 range sessions and one local PRS match. Had to modify the sides of the recoil lug to fit my terminus Zeus as well as drill two holes in the forearm to access the QC bolts. Has the std forend length with the Arca Rail and other handguard Arca rail as well. Also have a cad file to convert the plastic handguard to an aluminum one piece with built in Arca mount that’s flush with the rest of the chassis (3D print shown in the pictures).

Selling to upgrade to a more competition style chassis.
Asking $700 shipped including the grip

Used BAT TR action for sale. SAC spec’d, standard TR features except it uses standard trigger pins instead of hanger. Action has had a few barrels on it, close to 5,000 rounds. Still in excellent condition and extremely smooth. Bolt face is standard 308 and has brand new firing pin spring.

$1400 shipped to your FFL. Not looking to trade. PM me if interested.

98 boxes of Hornady Match 223 75gr.

$14 per box. I prefer to have a 3 box minimum because of shipping cost. Lots of 30 boxes I’ll reduce to $13 per box.

PayPal FF or Venmo

Gunwerks Clymr chambered in 7SAUM. Stainless action, 20” carbon barrel, trigger tech trigger, 13.75 LOP, Gunwerks hinged floorplate bottom metal, 20 MOA rail. The bare rifle weighs 6lbs 4ozs. Has right about 120 rounds through it and shoots great. Have one box of loaded Gunwerks 7SAUM ammunition with the Berger 168 VLDs. Shoots their factory ammo very very well. Has been on a couple hunts so the stock has some normal signs of wear, but no major scuffs or anything. I have two clymr stocks, one in halo grey and the other in forest green (which is what I bought the rifle with). Willing to sell with either stock. It’s sitting in the forest green stock now.

Also have 418 pieces of Gunwerks 7SAUM brass (about 120 twice fired and the rest is once fired).

Whidden 7SAUM bushing dies and a couple bushings

400 Berger 168 VLD projectiles

I want to sell as a package if I can. If the buyer doesn’t want the reloading components then it will be for sale.

Been a great rifle, just with my current family and hobby situation time to spend reloading is hard to find. And my pockets aren’t deep enough to buy Gunwerks ammo all the time

The rifle itself was $5400 ish when I bought it. Asking $5400 shipped for the gun, the loaded ammo, the components and dies. Or $4500 for just the rifle.

Accept Zelle or PayPal F&F (or add 3% for goods and services).

AR10 .243 Upper
Dracos Barrel
Aero Receiver- Enhanced
Sgt in arms 17.5” handguard with built in ARCA rail.
Rise Armament BCG
No charging handle or muzzle device

$875- Split shipping

Selling my Henry X in 45-70 with an XS Sight Rail, Ranger Point Handguard, Shellholder, Quick Takedown Screws, Chisel Stock, and Shell Holder. Asking $1200 plus shipping.

J. Braun comes along and gives me a little hope. I hope he goes far in his chosen profession and continues to show the citizens and his fellow LEO's what being a public servant looks like .
The good stuff starts about 20 minutes in.

Login to view embedded media

I've been toying with the idea of a "long range" semi-auto, but I'll be honest--not feeling the need to drop serious coin on a GAP or JP to get a 6.5 "done right" Thought maybe I'd do seekins or build my own (which I will most certainly F up). But since this build is mainly for PRS style 1000 yards in-- Is a 223 (aka small frame) a better choice, just suck up the inferior ballistics and spend the extra cash on range time, hookers, reloading supplies, and blow.

I've already got a bunch of long range bolt guns, so if I need the LR itch, I can scratch that with those--but a precision semi-auto, whats the thinking on a small frame 223 or similar if my limit is basically 1k distance. I was even thinking of grabbling my original 20in HBAR and slapping it onto an upper as a stopgap while waiting for a quality barrel.

I would just build an upper for my DPMS, but DPMS uppers+parts compatibility is a PITA--everyone "claims" compatibility, just like everyone "claims" a lot of shit, but in reality, I'd rather have a DPMS upper on my DPMS lower because (A) mine works and (B) the rule of large ARs is match your uppers and lowers (C) DPMS isn't selling DPMS uppers, so is what random interwebs guy selling really DPMS or just "compatible".

I think I just set the record for typing DPMS repeatedly....