New Terminus Zeus. RH SA .473 BF (standard).

Just cycled it 50 or so times. Super smooth action but decided to stick with my Impact because of the number of barrels I have hanging around for that.

Not the QC version. I had issues (not with Terminus) in the past with various QC systems and just dont go that route anymore. Its too easy to torque a barrel to second guess your rifle all the time.

Shipped to FFL CONUS

I have decided to sell a TacOps Tango 51 I don't shoot much anymore. I purchased this rifle new from Mike. Rifle was built on Remington action and BDL. Caliber is 308win and barrel is 18". Comes with Mike's muzzle brake, standard muzzle thread cover, birdsong coated 34mm Leupold rings, rear sling swivel stud, stock pack, hard case, and test target. Rifle has approximately 200rds through it. No trades.

$5300 Shipped from my FFL to your FFL.

Buyer must supply me with a copy of FFL for shipment and sign a bill of sale. Payment can be made through Zelle, Venmo, or by check (rifle ships after check clears).

I have decided to sell a TacOps Sierra 260 I don't shoot much anymore. Mike calls this rifle his M40A1 version as noted by the markings on the barrel. I purchased this rifle new from Mike. Rifle was built on Remington action and his own TacOps BDL bottom metal. Caliber is 260 Remington and barrel is 22". Comes with Mike's muzzle brake, standard muzzle thread cover, birdsong coated 34mm Leupold rings, front and rear sling swivel studs, stock pack, hard case, and test target. Rifle has approximately 80rds through it. No trades.

$5600 Shipped from my FFL to your FFL.

Buyer must supply me with a copy of FFL for shipment and sign a bill of sale. Payment can be made through Zelle, Venmo, or by check (rifle ships after check clears).

I have decided to sell a TacOps Echo 51 I don't shoot much anymore. I acquired this rifle via a trade from a gentleman in MT some time ago. I believe the rifle was in LEO use prior to that which is why it show signs of use. Rifle was built on Remington action and BDL. Caliber is 308win and barrel is 20". This is a relatively old rifle and was build by TacOps when they were still engraving details on the barrel and Birdsong was using the more tanish green color. . Comes with standard muzzle thread cover, birdsong coated 30mm Leupold rings, and hard case. I do not know total round count but I put approximately 250rds through it. I don't have a test target but the rifle shoots 168FGMM as a TacOps should. No trades.

$3300 Shipped from my FFL to your FFL.

Buyer must supply me with a copy of FFL for shipment and sign a bill of sale. Payment can be made through Zelle, Venmo, or by check (rifle ships after check clears).

Next two days I'll be updating the Demo and Used Gear Page. Get it while its available.


Thanks,

Jake

So the guy that was arrested in PA for killing the kids in Idaho looks just like Tim McVeigh with a slightly different hair cut.

Anybody have a 2023 Sequoia? My wife is going to be due for a new car within the next year or so. I’m starting my research now. I can’t find any real info on them yet, all I see online is people who are linked to Toyota telling everyone how great they are. I haven’t been able to get into one as my local Toyota dealers aren’t getting many allocations.

She’s been a Honda person since she was 15 and got an accord that went 245k we now have a 2020 passport that’s approaching 80-90k we typically will get her a new car at 150k miles which is about when we pay them off (3.5-4 years) I’d be fine sticking with another passport or a pilot, but I’ve heard people love their Toyota’s.


So does anybody have any first hand knowledge or experience with one?

Seems like a first class piece of shit.

Thoughts?

B prefix Remington 700 Varmint Special chambered in 308. Has some honest wear and scuffs but the action is nice and slick and the blueing is a deep glossy black. Stock Remington trigger, older glossy bottom metal, milled follower, sitting in a police style wood stock. Was planning a pseudo M40 clone with it but have too many projects. The bottom metal has a partial crack by the release, but doesn’t effect function and I can’t get it to flex for the life of me. $800 shipped, payment via PayPal F&F, Zelle, or USPS MO. If your FFL doesn’t accept from a private party add $35. SOLD

Fits NF 5-25 and 7-35 perfectly. Like new condition. Sat on a rifle that didn't get shot much.
45$ Shipped

So I took the last month off SH and maybe I’m in an argumentative mood or I’ve just spent more time using some of my equipment during deer season. Doesn’t matter.

After terminal performance (or lack thereof) on deer in Iowa during late season, I’ve decided I need more than that the 350L provides.

Current Iowa laws state that during muzzle loader season I can use any pistol over 35 cal so I’m looking to build something based on the AR10 platform with a <16” barrel (likely 15”). Driving factors for me are energy on target and bullets that expand at these velocities (greater than 1500fps to 1700fps is preferred) to deliver that energy. I don’t mind loading Cutting Edge Bullets or similar to get good performance but factory ammo availability just to have is a big plus for me.

Below are my choices but I’d love feedback from anyone on any cartridge you have experience with.

1. 358 Win - this seems to be dying off a bit but provides the best velocity and easy factory ammo / brass. Seems to be a legit 300 yd deer rifle with the right bullets / powder

2. 375 Raptor - I’ve heard of issues on headspacing due to the short shoulder, but the performance here seems great. I would prefer the 375 diameter bullet for more expansion at lower velocities.

3. 45 Raptor - gives up trajectory to get bullet expansion and serious energy on target. Probably closest to the 12 ga slug I grew up shooting.

Am I missing any other cartridges? I’d love to shoot a 338 Fed or 8.6 Blk but it doesn’t meet the diameter requirements. Thanks!

I am looking at these two rifles and have done my research and still can’t make my mind up. Both are about $1,100 and I am getting it in 308.

I am looking at the

Savage 110 Ultralite Gray Syn Proof Barrel​

And

Tikka T3x CTR​

What are your thoughts? Since this is my first bolt action and trying not to spend more than $1,200. Is one that better than the other? Looking for a quality rifle to get out to 1000 yards at some point. Thanks in advance

I'm looking for scope tape/wrap that isn't camo.

Pastel, fluorescent, etc.

Any links or tips on where to get some would be appreciated.

Patriot Valley Osprey 20” 22 creed. Unfired, never been threaded on, 5/8x24 threaded. $525 shipped and insured.

This is a movie about child abuse and its consequences. Really well done and deeply disturbing. 12 minutes in and I wanted to kill, it brought up some deep shit from my past, I know some of the rest of you share that. I'm posting a link to the film so maybe we can discuss it.

Login to view embedded media

Need opinions from guys who have used both.

I’ve got a rhino II with the dovetail adapter that I’ve been using for years and it works pretty well.

I’m in need of a 2nd mount and debating on getting a G24 for the extra for/aft adjustment. The only knock I have on the rhino is that even when fully extended the devices are a little closer to my eyes then I would prefer.

So is the Wilcox worth the extra $$? It will be around $500 where I can get another rhino for $200.

So they arrested Andrew Tate and his brother.

Don’t always like Ann Coulter but this was an informative article.

Stolen from John Murphy.

Never been on the base but Ive driven in the area. rugged, is an understatement.

Brand new still in the plastic wrap Leupold Mk5. (180726) 3.6-18x44mm scope. PR1 Mil reticle.

$1700 shipped and insured conus.
***SOLD***

McMillan A3 for Remington 700 SA ADL. Molded in camo Black/Green/Brown. Never bedded, lug pocket opened up for an aftermarket lug. Barrel channel for. 1.2” straight contour. Comes with action screws, trigger guard, and blind mag follower/box. Has a small cutout for side bolt release. $550 shipped. Payment via USPS MO, PayPal F&F or Zelle. SOLD

Apparently, he succumbed finally of Colon Cancer, today. He did a lot to foster soccer in the USA, playing for the NY Cosmos, etc.

Rest in Peace, sir.

Login to view embedded media

Not sure where to post this but since it goes with going to matches, I thought this looked like a logical spot.
Wonder if any of you all are camping at any of the matches? Thinking of purchasing a class B RV to roll to the matches. Would save a few $$$ ultimately, I could cook my own vittles and hang out in the evening with some friends around the fire, drink some Buffalo Trace, and strategize on how I’m gonna win the match .
Is anyone doing this? What are you ridin? Is it really cost effective, or just an added PITA?

I like to dry my wet tumbled brass in the oven at 225 for 30 minutes, then let it cool in the oven overnight to to insure that it's dry. Long story short, I left the brass in the oven for a few days. Wife pre heated the oven to 425 for some nom nom nom onion rings, and lo and behold. When she went to place the onion rings into the oven, there sat my brass. The brass was in that environment for about 25 minutes. It now has a nice rainbow hue to it in the right light. What type of damage did I do to that brass?
It's no real loss as it's only range .223/5.56 brass. Only 100 pieces that I was part of a lot that I will be turning into .300 BO Brass. But I would like to know what damage I did to the brass? Why is it now a rainbow hue? Obviously due to the high heat at a prolonged time, but metallurgically speaking, what happened to the brass? Should I throw it away now as it may be unsafe to use?