I'm shooting an 18" gas gun with a BDC reticle.

My primary load is IMI 77gr @ 2710fps. I zero it at 63 yards in order to match my BDC.

My training load is PMC XTAC @ 3120fps. I zero it at 100 yards in order to match my BDC.

If both loads were zeroed at same distance, I could just measure the POI difference between the loads and dial. So I'm guessing now I'd need to measure the POI difference (if applicable) and THEN use Strelok to know how many clicks to go from 63 -> 100 and vice versa.

Here's the issue. If I'm currently zeroed at 63 yards with my 77gr and want to move to 100 to use my 55gr, Strelok says it'd take 2 clicks down with the IMI 77gr selected, and 3 clicks down with the PMC selected. I don't know which I'm supposed to use if I'm trying to move from a 63y 77gr zero to a 100y 55gr zero and vice versa.

I have a new Gen 3 Henderson trimmer with Chip catcher, inline fab QD plate.
Set for 6.5 CM
I never used it or even turned it on.

800.00 net to me shipped.
I prefer NOT to use paypal due to there fees and 2A stance.
I will entertain other forms of payment.
It will come in factory box it came it.


Any question please massage me.

I have a AMP press I am going to post soon as well if interested please message me.

A few items for sale:

1. Hornady 6.5mm 140gr ELDM - 200qty, same lot#, unopened - $70 SOLD
2. Barnes Match Burner 6.5mm 140gr - 100qty, unopened - $30 SOLD
3. Starline 6mm Creedmoor SRP Brass - 100qty, brand new - $70 $65 SOLD
4. 300 Blackout Brass - 200 new X-Treme brass (from millworks) + 100 once fired mixed head stamp - $70 SOLD
5. H4350 - More than 7LB remaining. Purchased late 2021, stored indoors. Middle TN transaction (no shipping) - $275 SOLD
6. Starline 6.5 Grendel Brass - 200qty, brand new - $125 SOLD

Combo for deals. Prices include shipping. PayPal F&F preferred.

500 Berger 6.5mm 140gr hybrid target's for sale, or trade for 156gr elite hunter's. I can add bullets or cash for 156's. These are in 100 count boxes, and they are the same lot number.

$300 shipped

Need a recommendation for a commercial shipping outfit to get 2000 pounds +/- of ammunition from California to New York. Could use UPS but would prefer to do it all in one throw rather than endless packages. Ideally the shipping company would collect it as well. The ammunition is privately owned, and will remain so, this is not a wholesale or retail purchase.

Any suggestions appreciated. Have done a Google search but no bueno.

I have a brand new autotrickler V3 new in box. Packaging never opened. I've sat on it for sometime and debated between this or a v4 for the past year. I've decided to sell it. It seems like there is still some love for these V3 out there. Asking $450 shipped. Scale is not included. PM for any questions. Thanks. SOLD

-Chris

Look to sell or trade my Impact 737r. I've got maybe 150rds through it. It's in good shape just some field use. Asking $1250 shipped or trade for an NBK.

Technically whoever wants this could have it in 308BF or 223 as i can order the nbk and just keep my bolt and they can have whichever knob since it’s the same bolt.

Barreled Action for sale:
Remington 700 SA
Crown Ridge 6.5 Creedmoor Prefit
26" Sendero contour, 5r rifling
Badger Ordinance recoil lug
VG6 brake
Armor Black Cerakote

Asking $800

So I just pulled out my competition gun to start dry fire practice again and I can’t get my scope to focus on the dry fire target at 12 feet . I never had this problem before! Any suggestions would be greatly appreciated! Jimmy

I’ve spent more money on ammo and range time than optics in a while. Watched a video on the tremor 3. Seems pretty useful and not a ton of retraining from a standard mil reticle. Curios about real world experiences.

The Supreme Court decided to ignore this one, even though they had already ruled on a similar case

Login to view embedded media

Sig x5 legion, 200 rounds fired on one mag used the other 2 are still ne in plastic comes with case and everything from the manufacturer no scratches or wear comes with 3 17rd mags.

875 shipped located in northeast Florida

Bell & Carlson Target/Competition stock w/adjustable cheekpiece. For Remington 700 short-action. Black w/gray spiderweb. Comes with CDI Precision Gunworks bottom metal installed – for AICS magazines (not included), and Atlas 4” picatinny rail (installed)for bipod mounting.

$350 shipped Continental US via PayPal F&F.













(Action, barrel, trigger, optics, magazine and bipod not included)

Any good deals on a GOOD spotting scope this year? I'm sick of my junky Redfield piece. Cant see groups past 300 yds.

Didn't get out in the field today. Family is coming for Thursday as I've been cross country for the better part of the 21st century and we're busy unpacking and preparing. But having been away for a while and being young enough to grow up and learn to hunt here, I missed a few things:

I missed all the shit I would have gotten for showing up with an AI AND a can
I missed all the shit I would have gotten if I showed up with an AR-10
I missed falling asleep in the afternoon sun and getting busted: "Ain't gonna get yer deer that way!"
I miss my uncle and his "tank" tracked vehicle and busting his chops about it. But it was nice we didn't have to walk
I miss my aunt who was the only person who took in a city kid who wanted to learn to hunt.
I miss telling her how 6mm is cool again.
I miss all the goofy orange hats. Including mine.
I miss being so naive I didn't think I needed to lead a target
I miss my grandpa--he woulda gotta a kick outta my stuff--and how I still practice on pop cans with his/my 22
Mostly I just miss being another one of the guys on opening weekend.

Those were good times and now those folks are all gone (RIP).
And maybe next year my son and I can argue the merits of 30-06 and 6.5 Creedmoor while we're parked in the snow. Or go chase some pheasants around the field. Or I can laught at his southern ass freezing in the Northern Winter.

Mostly I just miss not having anyone to share it with--no one else really wants to go with "Crazy Family Gun Guy"

Does anyone know the name of the Action that's sitting in the Remington M2010 Chassis?

Not sure if it's a long action due to the length of the ejection port.

Thanks in advance to everyone for your help with this.


Screencap from Youtube Video ("Shooting USA"):

Nucleus G1.1(?) 223rem K&P barrel chambered by LRI for Berger 85.5 bullets. Barrel is 22" with 5/8" threads. Barrel has les than 10 rounds on it. Action has less than 50 rounds on it. Also have the 308 bolt head for it. $1400 shipped to your ffl

Trying to get some feelers out here, maybe I can get some pictures of your setups.

I'm trying to get a general consensus of what is the considered the maximum objective size and magnification for a small frame AR versus what is symmetrical for the size and weight.

Before I get hit with the Sponge Bob meme and "UsE ThE RiGhT ToOl For the JoB", slow your roll keyboard commando. I understand, and acknowledge that. If you have ever had a piece of kit that by the specs was the "right tool for the job" , but in practice was probably the worst choice due to size and weight considerations... You understand where I am at here, I'm looking for others experiences.

My setup in question is a 20 inch 6 ARC, looking at putting a 4-20 x 50mm scope on it. I don't want it banging into everything, and don't want to have Hubble attached to the top of my rail either.

Typical engagement is going to be from 50-750. Yes... you can shoot 1k at 8-10 power, doesn't mean I don't want PID at what I may be shooting at those ranges.

Any help is appreciated, stay safe.

I tagged out for Archery so have to wait until rifle season in 3 days

This was an amazing hunt. This buck was incredibly vocal. He was talking crap to a spike, a doe and the buck I wish I had shot. This feller's daddy was standing in my blind spot and went un-noticed until I made my shot. This buck was all kinds of angry, he was pinning his ears and snorting. He was so worked up that he didnt notice when my arrow fel off the string and hit the ground

Fortunately I was well camoflaged (ASAT Vanish Suit). It was a chip shot at 4 yards with a 25 yard recovery.

B&T Industries CAL Tall Atlas Bipod - w/ADM-170-S BT69-LW17. $275 shipped TYD. MO or PayPal F&F.

Up for sale is a basically brand new ZCO 5-27 MPCT 3x with a Spuhr 5001 mount. This is off of my V22, and it’s only seen about 100 rounds down range. I don’t shoot the 22 as much as I thought I would. Awesome scope though, with an amazing reticle.

I’ll let is go for SOLD with the Spuhr 6001. As seen in pics, scope is mounted and ready to throw on your rifle.

PP f/f preferred for ease, and I’ll send it out via UPS.

Thanks guys!

BE AWARE: Midwest Powders has an internet site that advertises in-stock reloading powders at good prices. However, after sending a PayPal amount following a message from Midwest Powders confirming my order, and where they requested that I send the order payment to a specific individual, I tried to get confirmation on a shipping date. After a week where I sent 3 emails repeating my request, and receiving no response, I tried calling them. The phone had been disconnected. I then sent an email to the individual where the PayPal payment had been sent. Again, no response.

Bottom line: Just called my credit card company and explained my concern. They agreed to cancel the charge from PayPal, and also notify PayPal of a payment made by me through deceptive/fraudulent practices on behalf of the seller. BEWARE MIDWEST POWDERS !!!!

PSA for those willing (I know there are a few): So if you want a "hit" list to break into the lowest 1% purity test bracket here's a good place to start.....

Spring Cleaning Sale

Getting rid of some of the things that I have no use for. You'll find the details listed below, if you need more photos of a specific item, send me a message and I'll get back to you. Prices are shipper to your door.

1. 308WIN 10rd AI mag (x2) - $70 per. Both $130.
2. High Speed Gear Duty Taco x2- Both in multicam. Brand new with tags still attached. Link here. - $40 per
3. Razor Gen2 HD 4.5-27x56 EBR-7C - Solid scope, everyone knows. Does not come with the mount, scope only. Comes with front/rear Tenebrex scope covers and Switchview folding throw lever. Objective and bell housing are clear, some scuffs around the ring section. - $1600
4. Sirui K20X Ballhead - Used once before it was replaced. Like new, no damage or scuffs. - $80
5. Spartan Mounts AR15 & PMAG Wall Mount - Secure and unique magazine-mount for quick and consistent mounting and removal of an AR15 and PMAG. Mount into a stud for a secure fit. - $20
6. Vortex Lo Pro Bubble Level 34MM - Standard low profile bubble level for 34MM scopes. New in box. Link here. - $65
7. BOBRO Compact Dual Lever Low Mount 34MM - The mount has two BLACR lever assemblies. The BLACR is Bobro Engineering's compact version of the proven BLAC design. The height is optimized to clear a scope objective diameter of 56mm on most bolt action setups. Link here.- $200
8. Stock Cheek Pad - Comes with 3 foam risers to adjust the height. Suede material. Comfy. - $25
9. Leupold Mark4 Rings 35MM - Brand new in box. Never used, never had a scope mounted in them. Link here. - $100
10. Vortex Pro Rings 30MM - Brand new in box. Never used, never had a scope mounted in them. Link here. - $75
11. Timney Trigger AR15 Small Pin Skeletonized 665S - Brand new in box. Never used, never installed. - $180
12. Butler Creek 43MM Objective Scope Cover - Brand new in box, never used or mounted. - $15
13. Shark Fin AR15 - California legal AR15 grip. Never used. -$20
14. Catalyst Arms Pic Mounted Monopod - Mounted temporarily on an RPR. Has some scuff marks on the bottom from the concrete bench. Operates fine. - $60
15. Vortex Bino Mount - Used temporarily with Sig Kilo BDX binos. Has scuff marks, otherwise in functioning order. $10
16. Ear Pro Head Cover - $10
17. Badger Ordinance Bottom Metal w/ 5 round AI mag. - Remington 700 SA. Purchased for a build but never installed or used in any way. - $280 (Sold)
18. Leupold VX-3i 4.5-14x40 Side Focus CDS-ZL Wind-Plex 30MM- Like new scope. Glass is clear and free of scratches. Will come with rings, the ones already attached to the scope. Comes with Leupold scope cover. Link here. - $100 (Sold)
19. Magpul PMAG 10rd Magazine - $15 (Sold)
20. Harrel 22CAL Tuner+Brake - Used to tighten groups on a Glenfield 22RL. No longer needed. - $80 (Sold)
21. American Defense Manufacturing Harris QD Bipod Mount - Piccatiny style bipod mount adapter for a Harris Bipod. - $65 (Sold)
22. AI Mag Holder - For belt mounting. Belt Clip mounting system. Rounds backward. - $20 (Sold)
23. MKM +2 Mag Adapter - Never used. Brand new. +2 magazine extension for AI mags. - $20 (Sold)

I take PayPal, PayPal G&S +3%, or Venmo. Whatever works.

Today is the one year anniversary of Kyle and his legal team beating the slimy activist ADA, Thomas Binder.

Cheers everyone!