Story here:


Wonder who TPTB have lined up to take over, any guesses?

I have a neighbor who wants to sell a couple of rifles, I bought an AR from him already but told him I want to think on two of the bolt guns.

1) GAP Hospitaller in .308. To me, it looks like the rifle actually is actually using some kind of trued Remington action. The seller thinks the rifle was purchased 10 years ago. In addition to the rifle itself, it comes with a S&B PM2 5-25 with some kind of very basic MilRad markings. The scope is a Sphur mount and it has an atlas bipod. The stock has a custom grey/black/white multi cam pattern. The seller told me he has something like 140 rounds downrange on the gun. There is not a single mark on the cerakote.

2) AI AX in factory 243. Only rifle and was told never fired.

He wants 6k for the GAP and 4k for the AI.

I have a aero 308 rifle that Im considering turning into a 12.5" and didn't want to get a pistol brace, so I'd like to register the lower as a sbr...

How do I go about doing so?

I have a new Manners TCS Stock in Altus Highlands camo. It had a barreled action mounted in it, but never fired. It was a custom build i had Altus shooting solutions do, but decided i wanted to stick with my extra MPA chassis. I just picked up the rifle today so no a single flaw on it. Fits all as far as i know Rem 700s and Clones.

1475 shipped

PayPal FF or Venmo

Purchased new month ago. Hand grip doesn’t fit my midget hands like I want. Went a different route.

$1550 Shipped

Would trade for MK5 PR2 reticle. 5-25 or 7-35

I have 4,400 pieces of once fired Hornady 6mm Creedmoor brass for sale. All were from factory Hornady Match 108gr ELD ammo.

0.50 per piece. Contact me if you would like a large amount and we can work out a deal! More you buy, more I will discount.

Disclaimer: Alot of these were from matches I shot, so there may be a few pieces of different brass that were picked up along with my own. I have gone through them but, I may have missed a few. I will provide plenty of extra pieces per order to account for this.

​

Got some stuff in trade and other places and I don't need it all. So here it goes. I'll try to get some pictures up later.

Make me an offer if you think my prices are out of line.

1. Dillon RT1200 trimmer, 223 steel trim die, Dillon 223 case gauge.
$250 Shipped.


4. Dillon 40 S&W Case Gauge.
$20 shipped.

5. Wilson 35 Whelen Case Gauge.
$30 shipped.



8. Dillon 1050/1100 30 carbine conversion kit. Comes with new set of Redding 80180 Dies for 30 Carbine.
$220 shipped.




10. Dillon steel 223 trim die.
$50 shipped.

Used STI 2011 Tactical Lite 4.0
comes with (1) 20-rd mag

Definitely less than 1000 rounds; probably less than 500.

Grips have been stippled.

$1650 shipped

No trades at this time

This was listed as a different setup but the stock sold. So I just wanna liquidate this with a quickness. Price is very fair, so don't waste my time with lowballs. Won't even respond to you.

Rifle consists of:

Defiance Tenacity Action (200 rounds through it, Cerakote black with some wear)
Proof 22" 6.5 Creedmoor CF Defiance prefit (New)
Huber 2 Stage trigger (Used)
KRG Xray Chassis (new)

It's a nice simple lightweight build. Comes in at 7 lbs 12 ounces. It's never been shot as is because I thought it was sold. I ordered the stock and now I'm reposting it. It comes only with what you see and feels fantastic. I just don't shoot 6.5cm so it's gotta go!

NO TRADES. WILL NOT PART.

Asking Price: $2200 Shipped & Insured

Payment Method: Paypal F&F You pay fees, or USPS MO

Shipping: USPS Priority mail from my FFL to yours.

Selling because I have no real time with a young family. Zermatt Origin action, green mountain 18” 7 twist MTU barrel (done by Keystone accuracy) threaded 5/8x24, triggertech singlge stage flat. Has just done break in and 40 rounds of load development.
Barreled action w/trigger: $1400
Above with EOTech Vudu 5-25 H59 and seekins rings: $2700

BUYER GET FIRST REFUSAL ON THE PILE OF RELOADING STUFF TOO

Found another GB gem. I can’t quite figure out how this one is made up.

Somebody cratered one of the Georgia guide stones.

Login to view embedded media

This is exactly what's going on. These people are not stupid, they are following a plan.

Planned chaos...



If you leave the gate open, the cow will wander off.

So if you intentionally leave the gate open, you want the cow to wander off.

You can't blame stupidity or laziness.

It was intentional.



If you cut police budgets, you will get more crime on the streets.

So if you intentionally cut police budgets, you wanted more crime on the streets.



If you cut back the supply of oil, gas prices will go up.

So if you intentionally cut back the supply of oil, you wanted gas prices to go up.



If you print trillions of dollars without increasing the supply of goods, inflation will hit hard.

So if you intentionally print trillions of dollars without more goods you wanted inflation to hit hard.



If you leave the southern border wide open, you get more drug trafficking and human trafficking.

So if you intentionally leave the border wide open, you wanted more drug trafficking and human trafficking.



If you shut down 40% of the supply of baby formula in February, you'll get a huge shortage.

When you KNOW a huge baby formula shortage is coming because of the FDA's actions, and you purposefully

do nothing to prevent it, month after month, until the crisis finally hits hard, you INTENDED this crisis.



It is time to recognize the evil people behind that old man.

They want crisis.

They want chaos.

They want riots.

They want conflicts in your town.



Their stated purpose years ago with Obama was to "take the US down a few notches on the world stage."

You can feel the quality of your life going down with the country.

These are not foolish or misguided people.

We are headed somewhere you don't want to go.



Forward this if you understand this is happening.

I have brand new (2) Impact 737 SA RH .308 AICS actions available.

$1,390 $1,350 each with free shipping to your FFL. Skip the wait!

I posted earlier that I want to get into long-range shooting, out to 2000 yrds. The general thought might be the more magnification the better, however, too much of a good thing can be bad. So for ranges out to 2000 yrds, is there a general accepted zoom/magnification that would be acceptable for distances that I'm talking about. 4.5x25-ish, 4.5x14-ish, etc.?

I'm sure this will NEVER make it to the Big 3 news channels.

BRAVO to the individual that made that call to LE!!!! If you know the person let them know a vet sends a BIG F_N Salute!!

Deep down I know this is a huge mistake. I LOVE this rifle but I do have 3, so this is on the chopping block because I fell in love with something I can't live without.

For sale is the following:

Vudoo V-22 G2
Vudoo/Proof Carbon Fiber 20" Kukri profile barrel
Manners CS1 Stock in High Plains finish
-Badger Ordnance Mlok INLET into the stock
-QD Cups on bottom front and rear
TriggerTech Diamond Black-Flat
Vudoo Factory 10rd poly mag

Optional
Vortex Razor HD II, 4.5-27 (Older EBr1 in Mils if I recall. Kinda my spare beater optic)
ARC Rings

Here's the skinny on this gun. You do NOT see many carbon fiber barreled Vudoos due to price and manufacturing time. I am the ORIGINAL owner and because this is a back-back-back-up gun, it has only seen 40 rounds. 20 straight and 20 suppressed. ABSOLUTELY zero failures of any type. It feels and shoots wonderfully but it needs someone to really break it in and get this thing hammering. As a third it will just never see it in my hands.

This setup is MINT though there's a small mark on the bolt from regular use. The only things really used on this build was the optic. Everything else was sourced new/unused.

This isn't the cheapest, but it's worth it with no wait. It's a perfect setup and I'll sell it with or without the optic.

BIPOD IS NOT INCLUDED AND NO TRADES. WILL NOT PART IT.

ASKING PRICE: $5300 W/ Optic/rings - Shipped and insured
$4100 W/O Optic/rings - Shipped and Insured
PAYMENT METHOD: Paypal F&F You cover fees or USPS Money Orders

SHIPPING: Priority mail full insured from my FFL to yours.

________________________________________________________________________________________

PRICE DROP TO GET THIS MOVING!!!

Want this gone, so here's a price drop to get it moving today.

Full Rifle
$5100 W/ Optic/rings - Shipped and insured
$3950 W/O Optic/rings - Shipped and Insured

Barreled Action
$2375 shipped without trigger
$2575 shipped with trigger

Bullets: 225gr ELD Match x1000

Expander Mandrel Die with mandrel: Sinclair .30cal mandrel

Brass: 300 Norma Mag Lapua Brass

Shell Holder: RCBS shell holder for .300 NM

Whidden Dies: FL adjustable sizing die with bushing and bullet seating die

Asking $1000
Phone 803-238-7989

God help us. This woman truly is dumber than a tree stump. She manages to make Uncle Joe look intelligent and well-spoken, no easy feat.

Dillion Powder Measure with toolhead and toolhead stand shipped $150

---

SOLD -Dillion 9mm Carbide Die set used shipped $40
SOLD -Dillion .45 ACP Carbide die set new sealed shipped $60
SOLD - Dillion Super Swage 600 shipped $ 100
All sold
1 Dillion primer flip tray shipped $30
2 RCBS ammo prep cases shipped $20
2 Dillion 9mm ammo case and 1 MTM $10 each or 3 for $25 shipped
3 Dillion 45mm ammo case and 1 MTM $10 each or 3 for $35 shipped

---

These pilots obviously failed CBRN (Chemical, Biological, Radiological, Nuclear) training. These cloth masks provide NO defense against micron sized SARS Virus. As Aircrew these pilots have been trained to use a "REAL Respirator" that filters deadly micron size particles.

Have the below for sale, all are in very good condition as reflect by photos. Some minor rub marks on then. Will accept Paypal F&F, USPS MO, and Check (ship when clear). Buyer pays actual shipping charges.

Upper Parts
-Geissele MK4 Federal DDC $325
-Geissele MK15 10.5" DDC $430
-Larue Match 16" Barrel w/ M4 feedramps $250 (50 rds thru it)
-BA Hanson Premium 10.3" 300 blk barrel $170 (New unfired) *SOLD*
-Surefire warcomp (no shims) $110 *SOLD*
-Lantac 5/8x24 7.62 brake $100 (visible wear)
-Terminator T2 5/8x24 7.62 $100 (visible wear)
-M16 FH $20
-unknown lmt clone brake/FH $10



BCGs:
-Aim light weight BCG Nitried (less than 100rds) $90 ***SOLD***
-Aim nitrided BCG (less than 100 rd) $80 ***SOLD***
-Unknown Phosphate BCG $80





Lower Parts
-Battle Arms PDW Vert Stock $450
-Battle Arms Sabertube "midlength 8 1/16") $140
-Odin Zulu Stock, does not come with buffer tube, $100
-Magpul PRS Gen 3, like new, $200 *SOLD*
-PWS Enhanced buffer tube gen 1, comes with custom around end plate so everything lines up nicely to the reciever. $100

We are making way for some inventory coming in
The No Name tripod will be on sale until 7/16
Customers will receive 10% off the tripod
If you guys have any questions feel free to reach out

Use Code

THEHIDE

Specs Listed Below

Specifications